COPYRIGHT © 2007 MERIT ENTERTAINMENT
Troubleshooting Information - Removal/Installation of Major Assemblies -
Ion eVo/eVo Wallette/Elite Edge/Megatouch Entertainer
Megatouch Ion Technical Reference Manual
ATTENTION:
OBSERVE PRECAUTIONS FOR HANDLING ESD-SENSITIVE DEVICES
Removal/Installation of Major Assemblies -
Ion eVo/eVo Wallette/Elite Edge/Megatouch Entertainer
Power Supply Removal
1. Turn off and unplug the game.
2. Unlock and open the CPU section.
3. Unplug the IEC connector from the power supply. See Figure 1.
IEC CONNECTOR
POWER
SUPPLY
HARD
DRIVE
FIGURE 2 - POWER SUPPLY MOUNTING SCREWS (2 PLACES)
4. Disconnect the wire connector nearest to the power supply.
5. Remove the 2 screws fastening the power supply and mounting bracket to the game (Figure 2).
6. Remove the power supply.
FIGURE 1 - OVERVIEW OF HARD DRIVE
COPYRIGHT © 2007 MERIT ENTERTAINMENT
ATTENTION:
OBSERVE PRECAUTIONS FOR HANDLING ESD-SENSITIVE DEVICES
Removal/Installation of Major Assemblies -
Ion eVo/eVo Wallette/Elite Edge/Megatouch Entertainer (cont’d)
Power Supply Installation
1. Install the new power supply and bracket in the game and fasten them with the 2 screws that were
used to fasten the old power supply and bracket. See Figure 2.
2. Connect the power supply wire connection.
3. Reconnect the IEC connector to the power supply. See Figure 1.
4. Close and lock the CPU section.
5. Plug in and turn on the game.
Troubleshooting Information - Removal/Installation of Major Assemblies -
Ion eVo/eVo Wallette/Elite Edge/Megatouch Entertainer
Megatouch Ion Technical Reference Manual