Maxx Upright Manual PM0139-09 — Megatouch Support & Repair

Megatouch Maxx Upright service or owner manual (document PM0139-09); image-only PDF with no extractable text to detail its specific subject.

UPRIGHT

OWNER’S MANUAL

merit industries, inc.

PM0139-09

FOR TECHNICAL ASSISTANCE:

CONTACT YOUR LOCAL DISTRIBUTOR

For a list of distributors, visit the Merit Industries, Inc. web site

www.meritind.com

Site Preparation ...............................p. 1

Game Description ...........................p. 1

CPU Section .............................p. 1

Coin Box Section ......................p. 1

General Care
and Maintenance .............................p. 1

Screen Calibration .....................p. 1-2

Degaussing Your
Monitor ......................................p. 2

Monitor Color
Adjustment Procedures .............p. 2

General Circuit Board
Handling Information .................p. 3

Cleaning the Cabinet .................p. 3

Cleaning the Touchscreen
Monitor ......................................p. 3

Cleaning the Fans and
Vents .........................................p. 3

Megatouch MAXX™ Software

Dip Switch Options Settings ..........p. 4

Game Name and Score Needed
for Initial Replay ..............................p. 5

Megatouch MAXX™
Game Operation

Game Setup ..............................p. 6

System Settings ........................p. 6-7

Game Menu ...............................p. 7

Coin-In Menu .............................p. 8

Books Screen ...........................p. 9

Megatouch MAXX™
Video Billboard

Video Billboard
Icon Functions ...........................p. 10

Video Billboard Font
Controls Screen ........................p. 11

Video Billboard Clip Art
Controls Screen ........................p. 11

Megatouch MAXX™ Hardware

Troubleshooting ..............................p. 12-13

Parts List and Illustrations

Game Illustrations ......................p. 14-16

Replacement Parts List .............p. 17-18

Warranty and Software License
Agreements

Warranty ...........................................p. 19

Software License Agreements

English.......................................p. 20-21

French .......................................p. 22-23

German .....................................p. 24-25

Table of Contents

Site Preparation

In determining the location for your

Megatouch MAXX™ video game, consider-

ation must be given to a suitable, grounded

electrical outlet. Since the game is a com-

puterized device, it should have a separate

circuit, if at all possible. If a separate circuit

is not available, care should be taken to pro-

vide a clean and constant voltage. As a ba-

sic guideline, never connect the unit to a cir-

cuit that also supplies power to freezers,

coolers or other high power consuming and

electrical noise generating equipment.

The upright model should be located on a

sturdy, level surface. The game will only re-

main stable when the four leg levellers are

extended and level. Extend the leg levellers

until they contact the floor and remove the

weight of the game from the cabinet wheels.

When the game is properly adjusted, it should

remain stable.

Game Description

The Megatouch MAXX™ comes housed in

a 19” upright cabinet. The upright model has

4 key-locked compartments: the PC shelf

section (front door), the coin box door, bill

stacker security hasp, and the rear door. It

is equipped with a coin mech and bill stacker;

optional bill acceptors are also available.

This model also has couplers installed in the

rear of the game. These are used for future

hardware upgrades which include linking and

modem capabilities.

Rear Door Compartment

The rear compartment of the 19” upright al-

lows access to the rear of the monitor and

the touchscreen controller.

CPU Section

The CPU section is accessible from the front

of the upright. The CPU section houses the

CRT, motherboard, I/O board, power supply,

hard drive, centronics connector, and the

main harness.

Coin Mech/Coin Box Section

The coin mech and coin box are accessible

from the front of the cabinet. The coin box

door is key-locked for security purposes.

Located on the PC shelf are two (2) internal

switches, ”SETUP” and “CALIBRATE,” and

the coin meter. Pressing the “SETUP” but-

ton will bring you to the Megatouch Setup

screen. See the next section for calibration

instructions.

General Care and Maintenance

NOTE: THIS GAME SHOULD ONLY BE

SERVICED BY QUALIFIED SERVICE
PERSONNEL.
CAUTION: THERE ARE HIGH VOLTAGE
PARTS IN THIS GAME. BE CAREFUL
WHEN SERVICING THE INSIDE OF THE

GAME. GAME SHOULD ALWAYS BE
UNPLUGGED BEFORE SERVICING.

Screen Calibration

NOTE: On upright models, if you open the
monitor door while the machine is on, you
will have to recalibrate the touchscreen.

The machine must be in the idle mode or

game select mode to calibrate the

touchscreen.

•

Find the “CALIBRATE” button, located

on the PC shelf and press it to enter

the screen calibration mode.

•

Touch the center of the first circle that

appears on the screen. Once you re-

lease your finger, a second circle will

appear on the screen.

NOTE: You must hold your finger on the
circle for approximately 2 seconds for the
calibration to be recognized.

1 MEGATOUCH MAXX™ UPRIGHT OWNER’S MANUAL PM0139-09

•

Touch the center of the second circle

that appears on the screen.

•

Once the second circle is touched and

released, a crosshair will appear on the

screen. To test the calibration of the

screen, touch the crosshair with your

finger and slowly drag your finger

around the screen. The crosshair

should follow your movement.

•

Touch the “EXIT” icon.

Degaussing Your Monitor

If your monitor is displaying “purity problems,”

(a display with purity problems will have parts

of an all-white screen affected by blotches

of color) the monitor needs to be degaussed

using a “degaussing coil.” A degaussing coil

is a circular electromagnet, used to cancel

out any stray magnetic fields that may build

up on a metal object.

All of our monitors have built-in degaussing

coils that are automatically activated on

power-up. If your game is experiencing mi-

nor purity problems, try powering down the

game for 20 minutes and then reapplying

power to activate the degaussing coil. If the

problem is not corrected, you will have to

purchase a manual-degaussing coil. Follow

the instructions below for degaussing a moni-

tor.

Plug in your degaussing coil.

Hold the coil about three feet from the

monitor, press the trigger to activate the

magnetic field. For circular-shaped

coils, orient the coil so you see the moni-

tor through the hole in the middle; for

wand-shaped coils, point the wand to-

wards the screen.

Move the coil in a circular motion around

the face of the monitor and slowly ap-

proach the game.

PM0139-09

MEGATOUCH MAXX™ UPRIGHT OWNER’S MANUAL

Continuing to move the coil in a circular

motion, slowly back away from the

monitor.

5a. CIRCULAR-SHAPED COILS: When

you are about three feet away, quickly

turn the coil perpendicular to the moni-

tor and release the trigger.

5b. WAND-SHAPED COILS: When you are

about three feet away, point the wand

away from the monitor and release the

trigger.

Monitor Colors Adjustment Procedure

For adjusting the colors on any of our moni-

tor types, we suggest following the proce-

dures described below. The vertical/horizon-

tal controls and brightness/contrast controls

are located on the monitor control panel,

velcroed inside the game. The monitor RGB

controls are located on the monitor

neckboard. Adjust the RGB controls until the

screens look as suggested in the following

steps.

Tatung/Wells Monitors

Set the game to the Checkerz game

screen.

Adjust the vertical and horizontal size

and vertical and horizontal position to

make sure that the game screen fills

the monitor screen and that the game

screen is centered.

Adjust the brightness and contrast con-

trols until the top sets of checkers are a

rich red and the bottom set are a dark

gray. The feet on the “Checkerz”

character should be white. (Adjusting

the brightness and contrast can also

correct for a lack of sharpness.)

General Circuit Board Handling

Information

Before handling any boards, observe the

following procedures:

•

Prevent Electro-Static Discharge by:

1. Storing the boards in the anti-

static bags in which they are

shipped.

2. Removing any static charge

from your body before handling

the boards.

3. Using a ground strap when han-

dling the boards.

•

When plugging in connectors to the

board, make sure the connector is

inserted straight onto the header and

that the connector covers all header

pins.

•

Do not connect any peripheral device

to the board, if the power is still

connected to the peripheral or if power

is already applied to the board.

CAUTION: Be extremely careful when re-

placing the lithium battery on the

motherboard. There is a danger of explo-

sion if the battery on the motherboard is in-

correctly replaced. Only replace the battery

with the same type recommended by the

manufacturer. Dispose of used batteries ac-

cording to the manufacturer’s instructions.

Cleaning the Cabinet

•

The cabinet should be cleaned with a

damp cloth and mild detergent.

Cleaning the Touchscreen Monitor

•

The touchscreen glass should be

cleaned with a damp cloth and isopro-

pyl alcohol or a non-ammonia cleanser.

Do not use any abrasive or vinegar-

based cleansers, as they will damage

the touchscreen glass.

NOTE: DO NOT USE ANY ABRASIVE SOL-
VENTS, ACID OR VINEGAR-BASED
CLEANSERS ON THE MONITOR OR SIDE
DECALS. OVER TIME, SUCH CLEANS-
ERS COULD HARM THE TOUCHSCREEN
AND ERASE THE DECALS. BE CAREFUL
NOT TO USE COMMERCIAL CLEANERS
CONTAINING ANY OF THESE SUB-
STANCES.

Cleaning the Fans and Vents

•

The fans and vents should be cleaned

of any dust and grime on a regular

basis to ensure proper ventilation of the

game.

•

To ensure proper operation of the game,

it is important that all fans are operat-

ing correctly and that the airflow is un-

obstructed. Make sure nothing is

placed inside the cabinet or next to the

fan vents that would inhibit the flow of

air. Also, if any fans are not operating,

it is important that they be replaced.

3 MEGATOUCH MAXX™ UPRIGHT OWNER’S MANUAL PM0139-09

PM0139-09

MEGATOUCH MAXX™ UPRIGHT OWNER’S MANUAL

*NOTE: The soft DIP switch settings displayed on your
game will depend on which games are selected as active in
the Game Menu screen, as well as the program version
used in your game. DIP controls for inactive games and
games not included in your program will not be displayed.

Megatouch MAXX

Software Instructions

DIP Switch Settings*
Physical DIP switches are reserved for fu-
ture use. All current operator-adjustable
functions are controlled by the soft DIP
switches (accessed by touching the “OP-
TIONS” icon on the Megatouch™ MAXX
Setup screen. See Figure 1).

TIMER1 YES

ALLOW SEX?

YES

ALLOW NUDITY? 2/3

YES

ALLOW SEX DURING ATTRACT? 3

YES

MYSTERY PHRASE SEX CATEGORY? 3

YES

MATCH 'EM UP BABES AND HUNKS? 3

YES

MEMOREE BABES AND HUNKS? 3

YES

TRIVIA SEX CATEGORY? 3

YES

PIXMIX BABES AND HUNKS? 3

YES

PHOTOHUNT EROTIC CATEGORY? 3

SET 4 YES

PLAYER SELECTABLE LANGUAGE?

OTHER ENG

DEFAULT LANGUAGE?

YES

LANGUAGE BUTTONS HAVE FLAGS?

YES

SOLITAIRE FREE GAME?

YES

TRIVIA/SNAP SHOT SHOW CORRECT ANSWER?

4/300K 5/1M

TRIVIA ROUNDS/BONUS?

YES

POWER SOLITAIRE SPLIT COLUMN MOVE?

YES

POWER SOLITAIRE FREE GAME?

$/¢

CREDS PRICE DISPLAY?

YES

STRIP POKER MOAN SOUNDS? 3

YES

STRIP POKER REWINDS ON LOSS? 3

YES

AUTO CLEAR HI-SCORES? 5

YES

6 STARS ENABLED?

YES

HI-SCORE ACCESS FROM 6 STARS? 6

YES

VBB ACCESS FROM 6 STARS? 6

YES

VOLUME CONTROL ACCESS FROM 6 STARS? 6

YES

CALIBRATION ACCESS FROM 6 STARS? 6

YES

SHOW DECK CARDS?

SHORT LONG FAN TIME? 7

YES

ALLOW GAME CONTINUE?

YES

ALLOW BONUS REPLAY? 8

YES

FREEPLAY ENABLED?

YES

EASY MODE ENABLED? 9

YES

POWER TRIVIA CATEGORY SAME FOR ALL?

YES

POWER TRIVIA CONSOLATION QUESTION?

YES

CONTINUOUS BONUS ROUND?

YES

GOLF HAS WOMEN?

3/G

5/R

PHOTOHUNT HINTS?

YES

TRITOWERS FACE-UP PLAYER SELECTABLE?

YES

ENABLE THEFT DETERRENT? 10

TOUCHSCREEN MODE? 11

YES

LINKED GAMES ENABLED

NOTE: Number corresponds to the options in the pre-
ceding table.

Touching “TIMER” for the “ALLOW SEX?” setting allows the
operator to set times during which adult-oriented categories
and games are available to the players. Using the arrows,
set the time at which the adult-oriented games and catego-
ries will be turned on and set the time at which they’ll be
turned off. The time is set using 24 hour, “military” time. The
factory default settings are set to turn on at 22:00 (10:00 PM)
and to turn off at 6:00 (6:00 AM).

When “ALLOW NUDITY” is set to “YES,” a small box will
appear to the right. Select the nudity level that will appear on
the game by touching the desired level.

These settings are only available if “ALLOW SEX?” is set to
“TIMER” or “YES.”

“SET” is only shown if “Player Selectable Language” is
set to “YES.” When enabled, the operator can select
which of the available languages will be displayed for
the user to select. To enable the languages: at the
Language Select screen, touch the desired language
on the left, then select an open field on the right.

When “AUTO CLEAR HIGH SCORES” is set to “YES,” a
small box will appear to the right. Touching this box allows
the time period to be set from 1 to 4 weeks (from the time the
player name is entered). The factory default setting is two
(2) weeks.

These settings are only available if “6 STARS ENABLED?”
is set to “YES.” For more information on 6 Stars, see Sys-
tem Settings.

This setting is only available if “SHOW DECK CARDS” is
set to “YES.”

Setting this to “YES” enables a bonus replay for all games
except Trivia Whiz, Pile On, Strip Poker, Double Solitaire
and Mystery Phraze. The following table shows the scores
needed to achieve a bonus replay (after a replay has been
earned, the next player must beat the last replay score to
earn another replay).

Easy Mode reduces the number of points needed to reach
the bonus round for Hoop Jones (125/150 points), Eleven-
Up (68,000/80,000 points), Tri-Towers (64,000/80,000
points), Royal Flash (180,000/200,000 points) and Quik
Match (250,000/280,000 points).

10 Setting this to “YES” enables the Theft Deterrent. If you

choose to enable this option, the game will automatically
shut down at specified intervals and you will need to reacti-
vate the game by entering a personal identification number.
If you select “YES”, the game will prompt you for a four to
eight digit pin number. It will then prompt you to choose the
intervals that you want the game to activate the Theft Deter-
rent mode. Select 1 week, 2 week, 3 week, or 4 week inter-
vals. In order to avoid the system shutdown, you must turn
off the Theft Deterrent and turn it back on again before the end
of the time interval that you have selected.

11 Touchscreen mode offers 2 options for touchscreen settings.

Mode 1 is standard (default). It is the recommended setting
for most locations. This setting allows for normal play. Mode
2 is an added feature used for faster play and reaction time
of the touchscreen. This mode is enhanced for intensive
play. When set to mode 2, certain environmental conditions
may cause slight touchscreen drift. If this occurs, return to
Mode 1.

Game Name and Score Needed

for Initial Replay

Great Solitaire, Power Solitaire, Route 66,

and Super Route 66 will always offer a re-

play once the listed score is attained. The

other games have to reach the score listed

as well as attain the high score for the game

in order to offer a replay.

Solitaire

45,000

Run 21

250,000

Royal Flash

300,000

Match'Em Up

200,000

Memoree

300,000

Tri-Towers

125,000

Four Play

1,500,000

Conquest

30,000

Strip Poker

No Replay

11-Up

125,000

Mystery Phrase

325,000

Hoop Jones

125

Zip 21

200,000

Checkerz

28,000

Quik Match

400,000

Power Solitaire

55,000

Pix Mix

350,000

Photo Hunt

400,000

Quik Cell

100,000

Tai Play

240,000

Golf

No Replay

Tennis Ace

No Replay

Puck Shot

3,000

Pile On

No Replay

Take 2

110,000

Double Solitaire

No Replay

Mega Link Trivia

No Replay

Merry Maidens

125,000

Eleven Ball

125,000

Chug 21

250,000

Funky Monkey

110,000

Hooter

No Replay

Power Trivia

No Replay

Trip Flip

150,000

3 Blind Mice

150,000

Route 66

50,000

Super Route 66

55,000

Fast Lane

100,000

Snapshot

No Replay

Lookout

400,000

Monster Madness

400,001

GO-O-O-AL

No Replay

Air Shot

No Replay

Pharaoh's 9

No Replay

Pile High

400,000

Wild 8's

400,000

QB Zone

65,000

Wild Apes

400,000

Quintzee

60,000

Astro Joe

120,000

Jumble Safari

125,000

Outer Spades

75,000

Hearts

65,000

Quiz Show

45,000

Boxxi

850,000

Moon Drop

160,000

Euchre Nights

5,000

Trivia Whiz

No Replay

5 MEGATOUCH MAXX™ UPRIGHT OWNER’S MANUAL PM0139-09

PM0139-09

MEGATOUCH MAXX™ UPRIGHT OWNER’S MANUAL

To Enter This Screen, Touch The

“Setup” Button In The Coin

Mech Section

Figure 1 - Game Setup Screen

Game Setup

The Game Setup controls allow the opera-

tor to access the following screens:

Coin-In Menu Enters the coin/credit setup screen.

Game Menu

Enters the game menu selection
screen.

Display Books

Enters the bookkeeping statistics
screen.

Options

Displays the soft DIP switch settings
screen. The DIP switches displayed on
this page will vary depending on which
games are active (see page 4 for a list
of DIP switch settings).

Video Test

Displays video test screens. Touch the
screen to cycle through.

Touchscreen

Test

Enters the touchscreen test for
checking touchscreen calibration.

High-Scores

Enters the clear high scores screen.
Touch game to select, touch “CLEAR
CURRENT” to clear the high scores for
that game. Touch “CLEAR ALL” to clear
all high scores. Activate Six Stars to
clear high scores.

Clear Credit

Erases all credits on the machine.

Free Credit

Adds credits without using coin switch.
Free credits are listed separately in the
books screen.

System

Settings

Enters the System Settings screen
which gives the operator access to the
Set Time, Set Game Serial Number,
Set 6 Star PIN, Security Setup, Volume
Control, Video Billboard and Mega Link
Test screens. See the System Settings
screen for explanations of each option.

Exit

Returns the game to the attract mode.

To Enter This Screen, Touch

“System Settings” At The Setup

Screen

Figure 2- System Settings Screen

System Settings

The System Settings controls allow the op-

erator to access the following screens:

Set Time

Brings up the Set System Date and
Time screen. Time is shown in 24-hour,
"military" time (e.g. 5:00pm = 17:00).
Use the up and down arrows to set the
time and/or the date.

Set Game

Serial Number

Brings up the Set Game Serial Number
screen. Enter the game’s serial
number using the keypad.

Set 6 Star

PIN*

Brings up the Set 6 Star PIN screen via
the info button in the main menu screen.
Touch the stars in the programmed
order to give access to the Video
Billboard, High Scores, Volume Control
and Calibration screens (to allow
access to any of these screens through
6 Stars, the DIP switch must be set to
“YES” for each screen; see the DIP
switch list on page 4).

Security Setup

Brings up the Set Security PIN screen.
From this screen, the operator can set
the PIN number and select which of the
features (Coin-In Menu, Game Menu,
Display Books, Options, High Scores,
Free Credits and Set 6 Star PIN) will
be protected by the PIN. To set the PIN,
first touch “SET” on the keypad. Then,
enter your 4-digit PIN using the keypad
and touch “ENTER.” The game will
prompt you to re-enter your PIN to
confirm. After confirming your PIN,
touch the icon for each of the features
you wish to protect with the PIN.

MEGATOUCH MAXX™ UPRIGHT OWNER’S MANUAL

PM0139-09

*Six Stars Enabled

This feature allows access to the Clear High

Scores, Volume Control, Video Billboard and

Calibration, without having to remove the coin

box. If the Six Stars Enabled dip switch is

set to “YES,” touching the info button in the

main menu will cause six numbered stars to

appear on the screen. Touching these stars

in the programmed order will bring up a

screen with icons for the Video Billboard,

High Scores and Volume Control, and Screen

Calibration screens (provided the appropri-

ate DIP switches have been set to “YES”).

To set the sequence in which the stars

must be touched, go to the “System Set-

tings” screen, touch the “Set Six Star PIN”

icon and set the sequence.

To Enter This Screen, Touch
“Game Menu” At The Setup

Screen

Figure 3 - Game Menu Screen

Volume

Brings up the Volume Control screen.
Touch the volume control icon to adjust
the volume up or down. This screen
allows you to sample the sound volume
without exiting the screen. The on-
screen volume control can also be
accessed using “Six Stars.”

Video

Billboard

See page 10 for Video Billboard
operation instructions.

TournaMAXX

Brings up the Tournament Set-Up
Screen. This is used only after you
have registered your game for
TournaMAXX™ play.

The game list and prices are programmed

using this screen. The left side of the screen

shows the various game menu names. The

fields to the right show the game positions

available, with the price for each game. The

list at the bottom shows all games available

for that category. The lower buttons will

reset the selected game menu to the default

setting (DEFAULT), clear all of the games

from the player’s game menu (CLEAR), clear

the selected item from the player’s game

menu (CLEAR 1), and reset all of the game

menus to the default settings (DEFAULT

ALL).

To program the player’s game lists, first se-

lect the category in which you want the game

to appear, by touching that category’s name

on the left side of the screen. Choose the

menu position you want the game to oc-

cupy, by touching that position. Then, touch

the desired game name, from the game list

on the bottom of the screen. That game will

now appear in the menu (a game cannot

appear in a game list more than once).

Games currently in the displayed category

will appear shaded in the game list on the

right. To adjust the price, touch the price in

the game menu. Each touch will rotate the

price from 25¢ (1CR), to 50¢ (2CR), to 75¢

(3CR), to $1 (4CR) and back to 25¢ (1CR).

Touch “EXIT” when done.

NOTE: TOP GAMES ALLOWS THE OPERA-
TOR  TO ENTER UP TO 6 GAMES IN  THAT
CATEGORY. SET THE TOP GAME THRESH-
OLD TO TELL THE GAME HOW MANY
PLAYS QUALIFIES A GAME FOR  THE TOP
GAMES LIST. ONCE A GAME REACHES THAT
NUMBER OF PLAYS, IT WILL AUTOMATI-
CALLY BE ADDED TO THE TOP GAMES CAT-
EGORY.   THE DEFAULT THRESHOLD IS “10.”

*Games currently in the displayed cat-
egory will appear shaded in the game
list on the right.

PM0139-09

MEGATOUCH MAXX™ UPRIGHT OWNER’S MANUAL

Game cost can be controlled two ways: by changing the number of credits required to

play a game or by changing the cost of a credit. The Coin-In Menu allows you to adjust

the cost of a credit, as well as providing a way to give players “bonus” credits for

depositing a higher amount of money.

When programming the Coin-In Menu, E1 is set for the lowest value coin, E2 for the next

highest value, etc. If all four coin inputs are not used, the unused inputs must be set to

“N/A.”. Adjust the coin/credit/meter pulse settings by touching the “plus” and “minus”

signs on the field you want to change.

In the above example (UK currency), each game costs one (1) credit and the cost for a

single credit is 30p. This method is preferred if you want game cost to always be reflected

as “1 credit.”

In the above example (UK currency), the cost of a credit is set to 10p and each game costs

3 credits (for a total of 30p). This method allows game cost to be increased by the smallest

unit of currency used (e.g. increasing the cost of Solitaire to four (4) credits would increase

the game cost by 10p).

In both examples, note that meter pulses are independent of credits and only track the unit

of currency (10p in the examples). Players are given an incentive to deposit more money

by giving them “bonus” credits for depositing 50p or £1. Coins may be deposited in any

combination of values and the game will automatically register the highest number of credits

for the total amount of coins deposited. Once a game is played, any remaining fractional

credits are erased.

Generally, most countries have a factory default setting. This setting can be adjusted (as

described above), but will return if the game memory is cleared. Some programs, depending

on the key used, have a CURRENCY DEFAULT DISPLAY located to the left of the coin inputs.

It shows the currency value for each of the coin inputs. This display is used as a guide and

is not used in any calculations. Touch the CURRENCY DEFAULT DISPLAY to hide/show the

display.

To Enter The Coin/Credit Setup Screen, Touch “Coin-In Menu” At

The Setup Screen

COIN VALUE

COIN INPUT

COINS

CREDITS

METER PULSES

10p

20p

50p

player premium 25p/credit

1£

player premium 20p/credit

COIN VALUE

COIN INPUT

COINS

CREDITS

METER PULSES

10p

20p

50p

1 bonus credit

1£

5 bonus credits

The books screen displays the current and

lifetime credit totals for each game, as well

as the percentage of credits played per game

(the percentage for each game is the total

number of credits played on that game di-

vided by the total number of credits entered

into the machine).

Touching a game name will display the cur-

rent and lifetime credit totals*, broken into 1

Player, 2 Player and Linked Games. It also

shows the “shortest,” “longest” and “aver-

age” playing times for that game (only “link-

only” games, like Pile-On, are included in time

calculations; time calculations for games that

can be played as link or amusement are only

displayed for the amusement version).

Touch CLEAR CURRENT to erase all current

book data.

*Touching Trivia Whiz or Power Trivia

displays totals by category.

Figure 4 - Books Screen

Figure 5 - Books Screen

w/ Time Inset

To Enter This Screen Touch “Display Books” At The Setup Screen

9 MEGATOUCH MAXX™ UPRIGHT OWNER’S MANUAL PM0139-09

PM0139-09

MEGATOUCH MAXX™ UPRIGHT OWNER’S MANUAL

Megatouch MAXX™ Video
Billboard Operating Instructions

The Megatouch MAXX™ Video Billboard al-

lows for six, separate advertising screens.

Two of the screens can only be accessed

using “Six Stars” (and are intended for use

by the location owner), the other four

screens are accessed using the Video Bill-

board icon located on the System Settings

screen.

The Video Billboard provides several font

styles, sizes and colors, a choice of back-

ground colors and designs, as well as a

variety of clip art. The basic Video Billboard

screen is shown below, followed by the

operating instructions. A maximum of 16

screen objects (a line of text or a piece of

clip art) can be placed on any given screen.

The Video Billboard also allows you to add 3

advertising screens that you create on your

personal computer. These screens are in

addition to the 6 screens that can be cre-

ated directly on the game. To create these

new screens, you will need a personal com-

puter with a PC card reader/writer, a graph-

ics program to create graphics and two 8

MB PC cards. Complete instructions can be

found on the Merit Industries website

(www.meritind.com).

Figure 6 - Video Billboard Screen

with Keyboard

To Enter This Screen, Enter The

System Settings Screen and

Touch Video Billboard

Callout # Screen Icon

Description

Timer

Allows the user to set the amount of

time the given screen is displayed

during the idle mode. The timer can
be set from 0 to 20 seconds, in 5
second increments. (Setting the

timer to zero (0) will prevent the

screen from being displayed. This is
helpful when designing a screen that

you do not want to display

immediately, but do want to store in

the game's memory for use at a later

date.)

Full Screen

Allows the user to view a full screen
preview of the designed screen.

While in "full screen", graphics and
text can be repositioned by selecting
them and then touching the new

location.

Clear Ad

Allows the user to erase the entire
design for the displayed screen. This
icon changes to "DELETE" if any
screen object is selected (when an
object is selected, a box appears
around the object).

Screen X

Touching this icon toggles through

each of the video billboard screens
(where "X" is the number of the
screen).

Fonts

Touching this icon displays the font
formatting icons on the bottom half of
the screen. These icons allow the

user to select from 4 styles of font, 3

font sizes and 8 colors. The screen

also has controls for alignment: right,
left and centered. To format the font,
select the desired text and then touch

the font style, size, color and/or

alignment (if you have more than one
line of text on the screen, you will
need to repeat this action for each
line of text). Touching the KEYBOARD
icon will return you to the keyboard
screen.

Background

This icon toggles the background

design through each of the 20 preset
backgrounds.

Clip Art

This icon displays the clip art selection
windows on the bottom half of the

screen. From here, the user can select
clip art to be used on the displayed
screen. Use the scroll bar at the
bottom of the screen to move through

the clip art. The clip art size can be

adjusted by selecting the piece of clip
art and then selcting "SMALL",
"MEDIUM", or "LARGE" at the bottom
of the screen (if you have more than
one piece of clip art on the screen, you

will need to repeat this action for each

piece of clip art.) Once the clip art is
displayed on the screen, touching the
desired clip art and sliding your finger

to the location where you want it placed

can move it. Touching the KEYBOARD
icon will return you to the keyboard
screen

Exit

Exits the user to the System Settings
screen.

Keyboard

The keyboard is used for entering all
text onto the displayed screen. Once
text is displayed on the screen,
touching the text and sliding your
finger to the loaction where you want
the text can move it. The cursor can

be moved to a new location by

touching the desired location.

Video Billboard Icon Functions:

MEGATOUCH MAXX™ UPRIGHT OWNER’S MANUAL

PM0139-09

Figure 8 – Video Billboard Screen

with Clip Art Controls

Callout #

Screen Icon

Description of Function

Select Type

Touch to change font type
(choose from 4 font styles)

Select Size

Touch to change font size
(choose from 3 size options)

Select Alignment

Touch to set font alignment (left,
right or centered)

Select Color

Touch to change font color
(choose from 8 colors)

Keyboard

Displays the keyboard

Callout #

Screen Icon

Description of Function

Clip Art

Touch a clip art window to

select (choose from 33 pieces
of clip art)

Select Size

Touch to change clip art size

(choose from 3 sizes)

Scroll Bar

Touch the arrows to scroll
through clip art

Keyboard

Displays the keyboard

Figure 7 - Video Billboard Screen

with Font Controls

PM0139-09

MEGATOUCH MAXX™ UPRIGHT OWNER’S MANUAL

Merit Industries, Inc.
Troubleshooting Guide for Megatouch MAXX™ Games

Refer to the list below if you are experiencing a problem with your Megatouch MAXX™ Game…

PROBLEM

CORRECTIVE ACTION

C OMMENT

No Power, Game
reboots/monitor seems to
power cycle

• Check that the power cord is connected

to a “live outlet.”

• Check that the power switch is turned

“ON.”

• Check that the power cord is connected

to the game power supply.

• Check that the power supply’s voltage

select switch is set to the proper voltage.

• “Live outlet” is an outlet powered

with electricity.

• The power switch is located in

the rear of the game.

• The power cord is plugged into

the power supply inside the
game.

No Video.

• Check that the game is powered and

turned “ON.”

• Check that the monitor is connected to

the game motherboard.

• Check that the power is connected to

the monitor and the motherboard.

• Make sure the RAM DIMM is properly

seated.

• See “No Power” under

“PROBLEM.”

• The monitor connection is

located inside the rear
compartment of the game.

• The monitor is powered from a

connection on the game power
harness, located in the CPU
section on countertops.

Touchscreen does not work.
(Microtouch)

• Verify that the touchscreen controller is

connected to power.

• Verify that the touchscreen controller is

operating.

• Verify that the touchscreen controller is

connected to the motherboard.

• Make sure the screen is not scratched.

• Make sure no metal is touching the

screen.

• Check COM1 setting during boot-up.

• Check for proper ground.

• The touchscreen controller is a

small box mounted inside the
rear compartment of the game.
On a game with a Microtouch
controller, an LED is illuminated
when power is applied. When
operating, the LED will change
intensity when the screen is
touched.

• Check for proper connection of

the controller power lead with the
power harness. The connection
is made near the controller in the
CPU section of the game.

• If the screen is scratched, it must

be replaced.

• The controller is connected to

COM 1 input on the motherboard
in the CPU section of the game.

• If COM 1 is bad, the

motherboard needs to be
replaced.

Poor picture quality.

• Adjust Brightness, Contrast, Horizontal,

and Vertical controls.

• Monitor controls are located in

the CPU section of the game.

“NO SOUND DRIVER,”
“INVALID KEY.”

• Make sure that the riser card is correctly

installed and seated.

• The riser card is the printed

circuit board connecting the I/O
board to the motherboard. The
riser card must be fully inserted
in the socket.

Merit Industries, Inc.
Troubleshooting Guide for Megatouch

MAXX™ Games continued

Refer to the list below if you are experiencing a problem with your Megatouch MAXX™ Game…

PROBLEM

CORRECTIVE ACTION

COMMENT

“ERROR - INVALID KEY”

• Check the Dallas Key. Verify that it is

installed, not damaged and seated tight.

• Bad I/O riser connection.

• The Dallas Key is the button-

shaped disc with a spoon handle
located on the I/O board.

Game locks up,
Game graphics incorrect.

• Perform two-button memory clear.

• Two-Button Clear:

1. Turn game power off.
2. Depress and hold the Calibrate

and Set-Up buttons located on
the connector board in the
CPU section in countertops.

3. With Calibrate and Set-Up

depressed, turn game power
on.

4. Release Calibrate and Set-Up

buttons when “2-Button Clear
Detected” is displayed on
screen.

5. “2-Button Clear Complete.”

No sound,
Game volume low.

• Adjust volume control.

• Make sure speaker harness is plugged

in.

• Sound harness is disconnected or

damaged.

• Speaker harness is connected at

J9 on I/O board.

• Headphone jack of sound

harness is connected at PL101
on the motherboard and the
other end of the sound harness
connects to J11 on the I/O
board.

Game volume loud,
Sound distorted.

• Turn volume down.

• The volume controls can be

accessed through the System
Settings screen in the MAXX
Setup software.

Operating system not found

• Ribbon cable from hard drive to

motherboard is loose.

• Make sure each end of the

ribbon cable is securely in place.

Meter not advancing.

• Check connection at I/O board.

• Check wiring at J3 METER

connector on I/O board in the
CPU section of the game.

“COIN JAM,”
A continuous tone emits
from the game.

• Check for coin(s) jammed in coin mech.

• If the game emits the coin jam indicator

sound when powered up, the
NORMALLY CLOSED contacts of the
coin mechanism are being used. The
NORMALLY OPEN contacts must be
used.

• Unlock the rear door of the game

to gain access to the coin mech.

For additional assistance, after contacting your distributor, contact:

Merit Product Support and Services

USA and Canada call toll-free:

1-800-445-9353

Outside the USA and Canada call:

(215) 639-4700

FAX: (215) 639-5346

Merit Industries, Inc. P.O. Box 5004, Bensalem, PA 19020-8529.

You can also visit our web site

www.meritind.com

MEGATOUCH MAXX™ UPRIGHT OWNER’S MANUAL

PM0139-09

Figure 9 – Upright (PC Shelf)

Figure 10 – Upright (Marquee/Front Decal)

PM0139-09

MEGATOUCH MAXX™ UPRIGHT OWNER’S MANUAL

EC7531-03

MW0452-01

PA3008-01

SA0179-02

EC0026-09

EC0028-03

PC SHELF

EC2198-01

SA10051-02

SA4089

GL3016-03

SA3243-02

GL2431-01,

MW0092-01-0A,
MW0093-01-0B

Figure 11 – Upright

(Monitor Section)

Figure 12– Upright (Rear Section)

MEGATOUCH MAXX™ UPRIGHT OWNER’S MANUAL

PM0139-09

WD0030-01

SA5117-05-0A

MW0095-01

MW-0124-01-0B

MW0374-01

WD0030-02

SA0177-04-0A

EC9840

Figure 14 – Upright (Monitor Door Section)

Figure 13 – Upright (Rear View)

PM0139-09

MEGATOUCH MAXX™ UPRIGHT OWNER’S MANUAL

SA0096-04

SA4084

EC2001

SW4024

MW0374-01

METER

MW0023-04

MW2013-01

MW0126-01-0D

MW0305-01

WD0013-01

SA9823-01

SETUP

AND CALIBRATION

BUTTONS

Megatouch MAXX™ Upright Replacement Parts List

PART#

PART DESCRIPTION

EC7531-03

110W AC-ON POWER SUPPLY

EC2191-08*

2X20 PIN, IDE, 9"L RIBBON CABLE

PA3008-01

MAXX DIAMOND EDITION PROGRAM ASSEMBLY

SA4089

TEST SWITCH W/CONNECTOR ASSEMBLY

EC9154*

12-VOLT, FROG EYE MOUNTING COUNTER

SW3005*

MOMENTARY, PANEL MOUNTING, PUSH BUTTON SWITCH

EC2198-01

CENTRONIC RECEPTACLE-IDE-POWER RIBBON CABLE

SA0179-02

MAIN HARNESS

EC0026-09

UNICORN 586 MOTHERBOARD W/AUDIO,RISER CPU

EC0028-03

MITSUBISHI TWO-SLOT RISER BOARD

SA10051-02

INPUT/OUTPUT VIDEO BOARD, W/O PRINTER

MW0452-01

UNICORN RISER BRACKET (RIGHT)

GL2431-01

DOUBLE DIAMOND MARQUEE

MW0092-01-0A

MARQUEE FRAME

MW0093-01-0B

MARQUEE CLAMP

GL3016-03

SYSTEM MEGATOUCH FRONT DECAL (BLACK CABINET)

SA3243-02

BEZEL ASSEMBLY

HW9500-01-0A*

MONITOR BEZEL

HW0031-01*

BEZEL TRIM, REAR

MW0138-01-0B*

2-POINT LOCK BRACE

MW0139-01-0A*

2-POINT LOCK GUIDE

MW0095-01

STAY ARM

MW0098-01-0A*

STAY ARM BRACKET

MW0124-01-0B

HINGE

SA0177-04-0A

6-WATT FLUORESCENT LAMP FIXTURE, 117V/60HZ

LB1030-01*

BULB, 9", 6-WATT

EC7016-01*

220V/50HZ, 6W BALLAST

* = not shown

MEGATOUCH MAXX™ UPRIGHT OWNER’S MANUAL

PM0139-09

Megatouch MAXX™ Upright Parts List continued

PART#

PART DESCRIPTION

MW0133-01-0A*

FLUORESCENT LAMP BRACKET

MW4147-01*

SMOOTH F-LAMP FIXTURE ENCLOSURE

SA5117-05-0A

3", 12VDC, 3-PIN FAN ASSEMBLY W/GUARD

SW4024

250V PANEL MOUNTING ROCKER SWITCH

SA0181-02*

POWER SWITCH HARNESS

WD0030-02

LEFT SIDE PANEL

WD0030-01

RIGHT SIDE PANEL

SA0178-01*

MAIN HARNESS

EC9840

TOUCHSCREEN CONTROLLER BOARD

SA0096-04

POWER ENTRY PLATE ASSEMBLY

EC9304-01*

250V @ 6AMP IEC LINE FILTER

MW0367-01*

POWER ENTRY PLATE

EC2001

DETACHABLE IEC CONNECTOR POWER CORD

WD0013-01

CRT SHELF

SA4084

4"SPEAKER ASSEMBLY WITH 2 PIN CONNECTOR

MW0023-04

BOLT, LOCK, 7.99"L

HW8716*

REAR DOOR LOCK, 564 LOCK, 1" 3/8L, STRAIGHT CAM

HW8741*

KEYED CASH BOX LOCK

HW8731*

KEYED BILL ACCEPTOR LOCK

MW2013-01

DUCK BILL CAM, UR, XL5

SA9823-01

TOUCHSCREEN OVERLAY ASSEMBLY

EC9823*

OVERLAY, TOUCHSCREEN, 19"

EC9378-05*

19" VGA MONITOR

MW0126-01-0D

FRONT LOCK/SPEAKER PANEL GRILL

MW0305-01

COIN CHUTE,SIDE MOUNT,UR,XL5

MW0374-01

COIN BOX

HW8733-04*

REAR DOOR LOCK AND CAM ASSEMBLY

* = not shown

PM0139-09

MEGATOUCH MAXX™ UPRIGHT OWNER’S MANUAL

NOTE: The parts in your game may vary. When calling for replacement

parts, make sure to have your serial number available to ensure the

accuracy of your order.

Merit Video Machine Limited Warranty

MEGATOUCH MAXX™ UPRIGHT OWNER’S MANUAL

PM0139-09

Merit Industries, Inc. warrants its video ma-

chines to be free from defects in material

and workmanship for a period of one year

from the date of purchase. The warranty

covers all electrical components (except

fuses and light bulbs) and printed circuit

boards. The touchscreen is under warranty

for a period of 3 years. Other items are

covered by warranty periods offered by the

original equipment manufacturers.

Failure due to misuse, vandalism, excessive

or intentional abuse, operation outside speci-

fied conditions (including, but not limited to,

improper electrical power source), fire, wa-

ter damage, acts of God, acts of war and

civil unrest are specifically excluded.

Merit products are carefully inspected and

thoroughly tested prior to packing and ship-

ment. Any damage discovered upon receipt

of goods, whether obvious or concealed,

must be reported immediately to the deliver-

ing carrier and claims made directly to them.

Merit assumes no responsibility for damages

once the product has left its facilities and

any disputes regarding transportation dam-

age must be resolved with the shipping

company(s).

Merit will repair or replace, at its option, any

component, part or assembly that fails un-

der warranty, provided that the failed item is

returned, shipping charges prepaid, to

Merit’s repair facility and Merit is notified of

the failure within the warranty period. Merit

reserves the right to request the serial num-

bers of the item and/or game which has

failed , and copies of sales invoices, bills of

lading or other documents as required to

determine the validity of the warranty cov-

erage. Merit will return or replace warranty

items, as specified above, shipping charges

prepaid, by ground transportation.

Merit’s obligation shall be limited to repair or

replacement as stated above, and shall spe-

cifically exclude any liability for consequen-

tial damages or loss of earnings.

Merit may, at its discretion, provide replace-

ment parts under warranty prior to receiv-

ing defective items, without incurring any

ongoing obligation to extend such accom-

modations.

In certain instances, due to geographical or

other considerations, Merit may offer PCB

warranty service on an extended time ba-

sis as follows:

(a) User notifies Merit in writing (or FAX)

of PCB failure, providing dates of failure,

serial numbers and a brief description of

failure symptoms.

(b) Failed PCBs are accumulated for a

time period or quantity accumulation, as

designated by Merit and sent in one ship-

ment to save shipping expenses.

of failure notification.

The above terms and conditions constitute

the sole obligation, written or implied, of Merit

Industries under its warranty coverage.

PM0139-09

MEGATOUCH MAXX™ UPRIGHT OWNER’S MANUAL

Merit Industries, Inc. Software License Agreement

Merit Industries, Inc. ("Licensor") is willing to license the enclosed software to you only if you
accept all of the terms in this license agreement.

Ownership of the Software

The enclosed Megatouch™ software program ("Software") and the accompanying writ-
ten materials are owned by Licensor and are protected by United States copyright laws,
by laws of other nations, and by international treaties.

Restrictions on Use and Transfer

If this Software package contains multiple media types (such as CD's, flash cards, hard
drives, etc), then you may use only the type of media appropriate for your Machine. You
may not use the other media types on another Machine, or transfer, or assign them to
another user except as part of the permanent transfer of the Software and all written
materials (as provided for below in paragraph 4).

You may make one copy of the software for backup purpose only. You may not copy or
make backup copies of any software security key or software security device under any
circumstances.

You may permanently transfer the right to use the Software and accompanying written
materials (including the most recent update and all prior versions) if you retain no cop-
ies and the transferee agrees to be bound by the terms of this Agreement. Such a
transfer of this license to another party terminates your license. You may not otherwise
transfer or assign the right to use the Software, except as stated in this paragraph.

You may not operate or allow the operation of the Software at locations where the
operation of such Software does not comply with all local, state, and other governmen-
tal body laws and regulations.

You may not modify, adapt, translate, reverse engineer, decompile, disassemble the
Software or create derivative works from the Software or any component thereof; nor
may you remove, modify or hide or otherwise make unreadable or non-viewable any
notice, legend, advice, watermark or other designation contained on the Software, com-
ponent thereof, or output therefrom.

You agree that the Software and the authorship, systems, ideas, methods of operation,
documentation and other information contained therein, and all versions, modifications
and adaptations thereto are proprietary intellectual properties of Licensor and are pro-
tected by civil and criminal law, and by the law of copyright, trade secret, trademark and
patent of the United States and other countries.

Limited Warranty

Licensor warrants, solely for your benefit, that the Software will function in material
conformity, with its accompanying documentation for a period outlined in Licensor's
standard product warranty period after your receipt of the Software.

Licensor's Obligations Under Warranty

Licensor's sole obligation under the aforesaid warranty shall be to utilize commercially
reasonable efforts to correct or modify such portion of the Software as to make it mate-
rially conform with the applicable documentation.

Grant Of License

10. Licensor grants to you the right to use one copy of the Software on a single Megatouch™

("Machine") accompanied by a single licensor factory authorized security key. Licensor
reserves the right to update versions of the software and the content to the Machine as
deemed appropriate by the Licensor.

Disclaimers

11. EXCEPT AS PROVIDED IN THE SECTION ENTITLED "LIMITED WARRANTY", LI-

CENSOR MAKES NO OTHER PROMISES, REPRESENTATIONS OR WARRANTIES,
WHETHER EXPRESSED OR IMPLIED, REGARDING OR RELATING TO THE SOFT-
WARE OR CONTENT THEREIN OR TO ANY OTHER MATERIAL FURNISHED OR
PROVIDED TO YOU PURSUANT TO THIS AGREEMENT OR OTHERWISE AND LI-
CENSOR SPECIFICALLY DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANT-
ABILITY AND FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO SAID
MATERIALS OR THE USE THEREOF. TO THE MAXIMUM EXTENT ALLOWABLE
BY LAW THE UNIFORM COMMERCIAL CODE OR OTHER UNIFORM LAWS SHALL
NOT APPLY TO THIS AGREEMENT.

Limitation on Liability

12. IN NO EVENT SHALL LICENSOR BE LIABLE UNDER ANY CLAIM, DEMAND OR

ACTION ARISING OUT OF OR RELATING TO THE SOFTWARE, OR LICENSOR'S
PERFORMANCE OR LACK THEREOF UNDER THIS AGREEMENT FOR ANY SPE-
CIAL, INDIRECT, INCIDENTAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES,
WHETHER OR NOT LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH CLAIM, DEMAND OR ACTION. IN ADDITION, WITHOUT LIMITING THE FORE-
GOING, IN ALL EVENTS THE REMEDIES AVAILABLE TO YOU SHALL BE LIMITED
TO THE AMOUNT PAID BY YOU TO LICENSOR FOR THE SOFTWARE.

13. IN NO EVENT WILL LICENSOR BE LIABLE TO YOU FOR DAMAGES, INCLUDING

ANY LOSS OF PROFITS, LOST SAVINGS, OR OTHER INCIDENTAL OR CONSE-
QUENTIAL DAMAGES ARISING OUT OF YOUR USE OR INABILITY TO USE THE
SOFTWARE.

General

14. The validity and construction of this Agreement and of the rights and obligations herein

shall be determined and governed by the laws of the Commonwealth of Pennsylvania,
USA. Any controversy or claim arising out of or relating to this agreement shall be
resolved in the appropriate venue in Pennsylvania, USA.

15. Merit, in its sole discretion, may assign this agreement or any of its rights and obliga-

tions hereunder.

16. If you have any questions concerning this Agreement or wish to contact Licensor for

any reason, please write: Merit Industries, Inc., 2525 State Road, Bensalem, PA 19020,
USA.

MEGATOUCH MAXX™ UPRIGHT OWNER’S MANUAL

PM0139-09

MEGATOUCH MAXX™ UPRIGHT OWNER’S MANUAL

Contrat de licence de logiciel de Merit Industries, Inc.

Merit Industries, Inc. (ci-après le "Concédant") est disposé à vous accorder la licence
d'utilisation du logiciel ci-inclus, à condition que vous vous engagiez à respecter tous les
termes, clauses et conditions du présent contrat de licence.

Droit de Propriété

Le logiciel Megatouch™ (ci-après le "logiciel") et toute la documentation écrite, restent
la propriété du Concédant et sont protégés par les lois du copywright des Etats-Unis,
ainsi que par les lois des autres pays et les traités internationaux.

Restriction d'Utilisation et Transfert

Si le présent logiciel comprend plusieurs types de composants (tels que CD-ROM,
cartes flash, disques durs, etc), vous ne pouvez utilisez que ceux qui conviennent à
votre appareil. Il est strictement interdit de les utiliser sur un autre appareil, les transférer
-ou les céder à un autre utilisateur, sauf si en cas de transfert permanent du logiciel et
de toute la documentation écrite (comme indiqué ci-dessous au paragraphe 4).

Il est interdit de copier le logiciel, à l'exception d'une copie de sauvegarde. Il est aussi
interdit de reproduire -ou faire des copies de sauvegarde des programmes de clé de
sécurité ou autres fichiers de sécurité, quelles que soient les circonstances.

Vous pouvez céder en permanence à un tiers -le droit d'utiliser le LOGICIEL et toute la
documentation écrite l'accompagnant, (ainsi que la plus récente mise-à-jour et toutes
autres anciennes versions) seulement si vous n'en gardez pas de copies, et si le
cessionnaire s'engage à respecter les termes, clauses et conditions du présent Contrat.
Cette cession à un tiers met fin à votre licence. Autrement, vous n'avez pas la permis-
sion de transférer ou d'accorder à un tiers le droit d'utiliser le présent logiciel, excepté
que tel que décrit dans le présent paragraphe.

Il est interdit d'utiliser le présent logiciel ou de permettre son utilisation dans des em-
placements où l'utilisation du présent logiciel n'est pas conforme aux lois et
réglementations locales, nationales ou réglementations d'autres organismes
gouvernementaux.

Il est interdit de modifier, adapter, traduire, démonter, décompiler, désassembler le
logiciel ou créer du matériel dérivé du logiciel ou de tout composant de celui-ci; vous ne
pouvez pas enlever, modifier ou cacher ou rendre illisible ou non-visible toute instruc-
tion, légende, information ou filigrane ou autre désignation qui apparaît dans le logiciel,
composant dudit logiciel ou résultant dudit logiciel.

Vous convenez que le logiciel et les droits d'auteur, les systèmes, les idées, les méthodes
d'utilisation, la documentation et autre information incluse, ainsi que toutes les ver-
sions, modifications et adaptations qui s'y rattachent sont les propriétés intellectuelles
du Concédant et sont protégées par le droit civil et pénal et par la loit sur le copyright, le
secret commercial, la marque déposée et le brevet aux Etats-Unis et dans les autres
pays du monde.

Limite de Garantie

Le Concédant garantit seulement à votre intention, que le logiciel permettra une utilisation
conforme, avec la documentation l'accompagnant, pendant la période de temps indiquée
dans la période de garantie du produit standard du Concédant, à compter de la date de
livraison du logiciel.

Responsabilité du Concédant aux termes de la Garantie

La seule obligation du Concédant aux termes de la garantie susmentionnée sera de
faire tous les efforts commercialement raisonnables pour corriger ou modifier la partie
du logiciel pour le rendre matériellement conforme aux spécifications de la documenta-
tion.

Concession de Licence

10. Le Concédant vous accorde le droit d'utiliser une seule copie sur un seul Megatouch™

(ci-après "Appareil") accompagné d'une seule clé de sécurité autorisée en usine et
fournie par le Concédant. Le Concédant réserve le droit de mise-à-jour des versions du
logiciel et du contenu de l'Appareil, quand il juge nécessaire de le faire.

Exclusion de toute autre garantie

11. EXCEPTE COMME PREVU DANS LA SECTION INTITULEE "LIMITE DE GARANTIE",

LE CONCEDANT N'ASSURE AUCUNE AUTRE GARANTIE DE QUELQUE NATURE
ET A QUELQUE TITRE QUE CE SOIT, EXPLICITE OU IMPLICITE, EN RAPPORT
AVEC LE LOGICIEL ET LES COMPOSANTS QUI L'ACCOMPAGNENT OU, LE CAS
ECHEANT, TOUT SUPPORT OU MATERIEL FOURNI CONFORMEMENT AU
PRESENT CONTRAT. EN PARTICULIER, LE CONCEDANT NE PEUT DONNER
AUCUNE GARANTIE, DE QUELQUE NATURE QUE CE SOIT, POUR LA
COMMERCIALISATION DE TOUS LES PRODUITS EN RAPPORT AVEC LE LOGICIEL
OU AVEC L'UTILISATION DE CELUI-CI. DANS LA MESURE OU CELA EST PERMIS
PAR LA LOI, LE CODE UNIFORME COMMERCIAL OU AUTRE LOI UNIFORME NE
S'APPLIQUE PAS AU PRESENT CONTRAT.

Limite de Responsabilité

12. LE CONCEDANT NE SERA EN AUCUN CAS RESPONSABLE DE TOUTE RECLA-

MATION, DEMANDE OU ACTION RESULTANT DE OU EN RAPPORT AVEC LE
LOGICIEL OU LA PERFORMANCE OU MANQUE DE PERFORMANCE DU
CONCEDANT EN VERTU DU PRESENT CONTRAT POUR TOUS DOMMAGES D'UNE
NATURE QUI N'EST PAS PRESUMEE PAR LA LOI ET QUI DOIVENT ETRE
EXPRESSEMENT PROUVES, DOMMAGE INDIRECTS, DOMMAGES-INTERETS
POUR PREJUDICE MORAL, QUE LE CONCEDANT AIT ETE AVISE OU NON DE LA
POSSIBILITE D'UNE TELLE RECLAMATION, DEMANDE OU ACTION. DE PLUS,
SANS LIMITER CE QUI PRECEDE, LES DEDOMMAGEMENTS A VOTRE DISPOSI-
TION SERONT LIMITES AU MONTANT QUE VOUS AUREZ PAYE AU CONCEDANT
POUR LE LOGICIEL.

13. LE CONCEDANT NE SERA EN AUCUN CAS RESPONSABLE DES DOMMAGES, Y

COMPRIS TOUTE PERTE DE PROFIT, PERTES D'ECONOMIE OU TOUS AUTRES
DOMMAGES INDIRECTS OU DOMMAGES-INTERETS ACCESSOIRES DECOULANT
DE L'UTILISATION OU DE L'IMPOSSIBILITE D'UTILISATION DU LOGICIEL.

Dispositions Générales

14. La validité et la construction du présent Contrat et les droits et obligations ci-inclus

seront déterminés et régis par les lois du Commonwealth de Pennsylvanie aux États-
Unis. Toutes litiges ou réclamations résultant ou relatives au présent Contrat feront
l'objet d'une procédure de conciliation dans un établissement compétent en Pennsylvanie,
aux Etats-Unis.

15. Merit Industries -réserve le droit de transférer le présent contrat à un tiers ainsi que ses

droits et obligations ci-après.

16. Pour toutes questions concernant le présent Contrat -ou si vous désirez contacter le

Concédant pour une raison quelconque, veuillez écrire à: Merit Industries, Inc., 2525
State Road, Bensalem, PA 19020, Etats-Unis.

MEGATOUCH MAXX™ UPRIGHT OWNER’S MANUAL

PM0139-09

MEGATOUCH MAXX™ UPRIGHT OWNER’S MANUAL

Merit Industries, Inc. Softwarelizenzabkommen

Merit Industries, Inc. („Lizenzgeber") ist nur dann bereit Ihnen eine Lizenz für die beiliegende
Software zu erteilen, wenn Sie alle Bestimmungen dieses Lizenzabkommens akzeptieren.

Eigentumsvorbehalt der Software

Das beiliegende Megatouch™ Softwareprogramm („Software") und die schriftlichen
Unterlagen sind Eigentum des Lizenzgebers und sind durch die Gesetze der Vereinigten
Staaten und anderer Länder und durch internationale Verträge urheberrechtlich geschützt.

Beschränkungen im Gebrauch und Transfer

Sollte diese Softwarelieferung mehrere Medien enthalten (z.B. CD, Karten, Festplatten
usw.), dürfen Sie nur die für Ihre Maschine angebrachte Medienart verwenden. Die
anderen Medienarten dürfen nicht auf anderen Maschinen verwendet werden oder an
Dritte übergeben werden, abgesehen von einem endgültigen Transfer der Software und
aller schriftlichen Unterlagen (wie im untenstehenden Paragraphen 4 beschrieben).

Sie dürfen nur eine Sicherungskopie der Software herstellen. Unter keinen Umständen
dürfen Sie einen Softwaresicherungsschlüssel oder Sicherungsmaßnahmen kopieren
oder davon Sicherungskopien herstellen.

Sie dürfen das Nutzungsrecht für die Software und die schriftlichen Unterlagen
(einschließlich der aktuellen Version und aller vorhergehenden Versionen) an Dritte
übertragen, wenn Sie keine Kopie behalten und wenn der Empfänger die Bestimmungen
dieses Abkommens akzeptiert. Bei einem solchen Transfer der Lizenz an Dritte erlischt
Ihre Lizenz. Abgesehen von den Bestimmungen dieses Paragraphen sind alle anderen
Transfers oder Übertragungen der Nutzungsrechte für diese Software unerlaubt.

Sie dürfen die Software nicht benutzen oder eine Nutzung gestatten, wenn eine solche
Nutzung der Software irgendwelche Gesetze und Verordnungen der kommunalen oder
staatlichen Behörden verletzen würde.

Es ist Ihnen nicht gestattet, die Software abzuändern, zu verändern, zu übersetzen,
rückumzuwandeln, zu dekompilieren oder zu zerlegen, oder aus der Software oder
eines Teils davon andere Werke abzuleiten. Sie dürfen auch aus der Software, einem
Bestandteil der Software oder aus den Datenausgaben der Software keine Hinweise,
Bemerkungen, Ratschläge, Wasserzeichen oder andere Markierungen entfernen,
verändern, verbergen oder auf andere Art unlesbar machen.

Sie akzeptieren, dass die Software und die Urheberschaft, die Systeme, die Ideen, die
Arbeitsweisen, die Dokumentation und alle anderen darin enthaltenen Informationen
und alle Versionen, Veränderungen, und Bearbeitungen davon das geistige Eigentum
des Lizenzgebers sind, und dass sie durch Straf- und Zivilgesetzgebung und durch die
Copyright-, Geschäftsgeheimnis-, Warenzeichen- und Patentgesetze der Vereinigten
Staaten und anderer Länder geschützt sind.

Beschränkte Garantie

Der Lizenzgeber garantiert zu Ihren Gunsten, dass die Software für die angegebene
normale Garantiezeit des Lizenzgebers nach Ihrer Annahme der Software in erheblicher
Übereinstimmung mit der beiliegenden Dokumentation laufen wird.

Verpflichtung des Lizenzgebers im Rahmen der Garantie

Die ausschließliche Pflicht des Lizenzgebers im Rahmen der vorstehenden Garantie
besteht darin, alle geschäftlich vertretbaren Schritte zu unternehmen, um Teile der Soft-
ware zu berichtigen oder abzuändern, bis sie mit der beiliegenden Dokumentation
erheblich übereinstimmen.

MEGATOUCH MAXX™ UPRIGHT OWNER’S MANUAL

PM0139-09

Übertragung der Lizenz

10. Der Lizenzgeber gibt Ihnen das Anrecht, eine Kopie der Software auf einer einzelnen

Megatouch™ („Maschine") mit einem einzelnen werksmäßig gestatteten
Sicherungsschlüssel zu benutzen. Der Lizenzgeber behält sich das Recht vor, nach
eigenem Ermessen die Software und den Inhalt der Maschine zu verbessern.

Beschränkungen

11. ABGESEHEN VON DEN BESTIMMUNGEN DES PARAGRAPHEN „BESCHRÄNKTE

GARANTIE" GIBT DER LIZENZGEBER KEINE SONSTIGEN VERSPRECHEN,
VERPFLICHTUNGEN ODER GARANTIEN, OB AUSDRÜCKLICH ODER
STILLSCHWEIGEND, FÜR DIE SOFTWARE ODER IHRE BESTANDTEILE ODER FÜR
ALLE ANDEREN MATERIALIEN, DIE IHNEN IM RAHMEN DIESES ABKOMMENS
ZUR VERFÜGUNG GESTELLT ODER ÜBERLASSEN WERDEN, UND DER
LIZENZGEBER LEHNT AUSDRÜCKLICH ALLE ANSPRÜCHE AUF MARKTFÄHIGKEIT
UND EIGNUNG DER BESAGTEN MATERIALIEN FÜR DEN GEWÖHNLICHEN
GEBRAUCH AB. SOWEIT GESETZESMÄSSIG ZUGELASSEN, SOLLEN DIE
HANDELSRECHTLICHE GESETZGEBUNG AUS DEM UNIFORM COMMERCIAL
CODE ODER ANDERE GESETZE AUF DIESES ABKOMMEN NICHT ANWENDBAR
SEIN.

Haftungsbeschränkung

12. DER LIZENZGEBER HAT KEINERLEI HAFTUNG BEI EINEM ANSPRUCH, EINER

FORDERUNG ODER EINER KLAGE, DIE AUF NUTZUNG DER SOFTWARE, DER
LEISTUNG DES LIZENZGEBERS ODER DESSEN VERSAGEN IM RAHMEN DIESES
ABKOMMENS FÜR JEGLICHE FOLGE-, INDIREKTE, SONDER- ODER
NEBENSCHÄDEN BERUHEN, SELBST WENN DER LIZENZGEBER AUF DIE
MÖGLICHKEIT EINES SOLCHEN ANSPRUCHES, EINER FORDERUNG ODER EINER
KLAGE HINGEWIESEN WURDE. WEITERHIN UND OHNE BESCHRÄNKUNG DES
LETZTEN SATZES, DÜRFEN IN ALLEN FÄLLEN DIE IHNEN ZUR VERFÜGUNG
STEHENDEN ABHILFEN DIE VON IHNEN FÜR DIE SOFTWARE AN DEN
LIZENZGEBER GEZAHLTE SUMME NICHT ÜBERSCHREITEN.

13. DER LIZENZGEBER HAT IN KEINEM FALL EINE HAFTUNG IHNEN GEGENÜBER

FÜR SCHÄDEN, EINSCHLIESSLICH ETWAIGER GEWINNVERLUSTE, NICHT
REALISIERTER EINSPARUNGEN ODER ANDERER NEBEN- ODER
FOLGESCHÄDEN, DIE AUS IHRER VERWENDUNG ODER
GEBRAUCHSUNFÄHIGKEIT DER SOFTWARE ENTSTEHEN.

Allgemein

14. Die Rechtsgültigkeit und Provisionen dieses Abkommens und der darin enthaltenen

Rechte und Pflichten werden durch die Gesetze des Commonwealth of Pennsylvania
bestimmt. Alle Ansprüche, die aus diesem Abkommen entspringen oder dieses
Abkommen betreffen, werden am jeweiligen Verhandlungsort in Pennsylvania, USA,
verhandelt.

15. Merit kann nach eigenem Ermessen dieses Abkommen oder jedes der darin enthaltenen

Rechte und Pflichten an Dritte abtreten.

16. Bei Rückfragen über dieses Abkommen oder wenn Sie den Lizenzgeber aus einem

anderen Grund kontaktieren wollen, bitte schreiben an: Merit Industries, Inc., 2525 State
Road, Bensalem, PA 19020, USA.

NOTES:

__________________________________________________________________

_______________________________________________________________

________________________________________________________________

___________________________________________________________________

_______________________________________________________________

________________________________________________________________

__________________________________________________________________

_________________________________________________________________

______________________________________________________________

________________________________________________________________

___________________________________________________________________

__________________________________________________________________

_________________________________________________________________

_____________________________________________________________________