Money Shoot Installation & Owner's Manual (PM0519-03)

Installation and owner's manual for the Megatouch Money Shoot game covering site preparation, security key, diagnostics, promotions, and maintenance.

merit industries, inc.

PM0519-03

FOR TECHNICAL ASSISTANCE:

CONTACT YOUR LOCAL DISTRIBUTOR

For a list of distributors, visit the Merit Industries, Inc. Web site

www.meritind.com

Installation & Owner’s

Manual

Site Preparation .............................p. 1

Setting up your
Megatouch Game ..........................p. 1

Game Description .........................p. 1-2

CPU Section ..............................p. 2

Hopper/Overflow Bucket ..........p. 2

Security Key .............................p. 2

General Care
and Maintenance ...........................p. 2-4

Screen Calibration .....................p. 2

Monitor Color
Adjustment Procedures ............p. 3

General Circuit Board
Handling Information ..................p. 3

Cleaning the Cabinet .................p. 4

Cleaning the Touchscreen
Monitor ......................................p. 4

Cleaning the Fans and
Vents .........................................p. 4

Watchdog Timer ........................p. 4

Megatouch FORCE Software

Main Menu ......................................p. 5-6

Amusement Games Menu ..........p. 7

Amusement Hi Scores Menu .....p. 7

Books Menu ...................................p. 8-9

Cash Settlement Screens .........p. 9

System Menu .................................p. 10

Diagnostics Menu ........................ p. 11

Presentation Menu ...................... p. 12

Operator Ad Screens ............... p. 12

Promotion Menu .......................... p. 12-13

My Merit .................................... p. 12-13

Merit Money .............................. p. 13

Promo Credits ........................... p. 13

S.W.P. Menu ................................... p. 14-16

Game Setup ............................. p. 14

Statistics ................................... p. 14

Hopper Setup/Refill .................. p. 15-16

Set Security PIN ....................... p. 16

Mode Configuration Menu ......... p. 16

Megatouch FORCE Hardware

DIP Switch Settings
in FORCE Games ........................... p. 17

Troubleshooting ........................... p. 18-20

Parts List and Illustrations

Game Illustration ....................... p. 21-24

Replacement Parts List ............ p. 25

Connection Diagrams ............... p. 26

TournaCHAMP ............................... p. 27-37

Warranty and Software License
Agreements

Warranty .................................. p. 38

Software License
Agreements ............................. p. 39-44

Table of Contents

Championship Edition, Money Shoot, and TournaCHAMP are registered trademarks of Merit Industries, Inc.

Reproduction of this manual, in any form or by any means, is strictly forbidden without the written permission of Merit Industries, Inc.

Site Preparation

In determining the location for your

Megatouch video game, consideration must

be given to a suitable, grounded electrical

outlet. Since the game is a computerized

device, it should have a separate circuit if at

all possible. If a separate circuit is not avail-

able, care should be taken to provide a clean

and constant voltage. As a basic guideline,

never connect the unit to a circuit that also

supplies power to freezers, coolers or other

high power consuming and electrical noise

generating equipment. Place the game in a

location where nothing will interfere with

proper ventilation. The game should not be

exposed to any dripping or splashing liq-
uids.

NOTE: After turning off the unit, wait
60 seconds before turning the game
back on. This will allow the game to
properly reset.

Setting up your Megatouch Game

Remove the game from the carton.

Open the additional box and use the

instructions provided to attach the drink

arms to the game.

Attach the power cord to the back of

the game near the ON/OFF switch. Plug

the game into a standard AC outlet.

Turn the power switch at the back of

the game to ON and wait for it to go

through its boot-up sequence. At the

completion of the boot-up sequence,

the game will display the Player Menu.

The machine has been preset at the

factory and therefore should not need

to be adjusted; however, it is recom-

mended that the screen be calibrated

(see Screen Calibration) and the coin

or bill acceptor(s) be tested.

There are many custom settings avail-

able for the game. To customize the

settings, follow the instructions begin-

ning with the Main Menu section in this

manual.

Game Description

The game is housed in a 61.25” upright cabi-

net. It should be located on a sturdy, level

surface. The bottom of the cabinet has four

leg levellers to make any necessary adjust-

ments. When the game is properly adjusted,

it should remain stable.

There are 4 key-locked compartments: the

top bezel, monitor bezel, bottom door, and

the cash box door. An additional keyhole is

located on the right side of the game for the

Refill Key. See the Hopper Refill section of

this manual for more information.

Three modes are available for gameplay:

Amusement, Money Shoot/Skill With Prize

(S.W.P.), and Tournament (TournaCHAMP

and Championship Edition). The default set-

ting is S.W.P. only. TournaCHAMP play re-

quires a modem. Championship Edition is

available with the purchase of an additional

kit (part number KUV-113-003-01).

The SETUP and CALIBRATE buttons are lo-

cated on the monitor control board above

the LCD touchscreen (see Figure 1). To

access the monitor control board, unlock the

left and right locks on the top bezel. Lift the

bezel. The screen will go blank. Press the

SETUP button and a keypad will display on-

screen. Enter your PIN code (default is 4777)

to load the Main Menu Screen or turn the

Refill Key. An incorrect PIN will clear the

keypad. After 3 incorrect attempts, entry to

SETUP is not permitted. Close and open the

top bezel to reset the keypad.

See General Care and Maintenance for

calibration instructions.

NOTE: To close the bezel, lift it, then
push down on the yellow rubber
bracket covers to move the brackets
from the locking channel. Lower the
bezel to close. Make sure all doors are
locked after closing the doors.

1 MONEY SHOOT OWNER’S MANUAL PM0519-03

PM0519-03 MONEY SHOOT OWNER’S MANUAL

CPU Section

The CPU section is accessible by unlocking

the bottom door of the game. This section

houses an electronics box which contains

the motherboard, I/O board, power supply,

hard drive, and the main harness.

The Cash In, Cash Out, Hopper Refill, and

Prize Pool hard meters are attached to the

electronics box. See Figure 23. Each meter

is labeled.

Coin Mech/Bill Acceptor and Cash Box

The coin mech and/or bill acceptor are ac-

cessible by opening the monitor bezel of the

cabinet (see Figure 21). The coin box and

the hopper overflow bucket are located

within the metal cash box door. This door is

key-locked for security.

Hopper

The hopper is located in the monitor bezel

compartment and dispenses coin prize

payouts. See the Hopper Setup section

of this manual for further instructions.

Security Keys

Money Shoot is equipped with two security

keys. Key 1 is located on the monitor con-

trol board. See Figures 1 and 22. Key 2 is

located on the I/O board and is permanently

installed in the game. See Figure 23.

Key 2 requires recharging after 40,000 Gen-

eral Purpose Plays (sum of all Amusement,

S.W.P. and Tournament credits) are used.

Once the number of General Purpose Plays

is less than 3,000, the message “Warning

X credits remaining, please recharge

key,” will display in the SETUP Menu and

on the Refill screen.

To order Recharge Key kits (part number

KUV-113-002-01), contact your authorized

Merit Distributor.

If the number of General Purpose Plays de-

creases to 0 without being recharged, S.W.P.

mode will automatically deactivate and the

game will begin to use its 1,000 Emergency

Reserve credits. All Amusement and Tour-

nament games will continue to be available.

Once the 1,000 Emergency Reserve credits

are used, the game will limit play to 9 pre-

selected Amusement games. These games

cannot be changed by the operator. The

game will not regain normal functionality until

Key 2 is recharged.

General Care and Maintenance

NOTE: THIS GAME MUST ONLY BE SER-
VICED BY QUALIFIED SERVICE PER-
SONNEL.

CAUTION: THERE ARE HIGH VOLTAGE
PARTS IN THIS GAME. BE CAREFUL
WHEN SERVICING THE INSIDE OF THE
GAME. GAME SHOULD ALWAYS BE
UNPLUGGED BEFORE SERVICING.

Screen Calibration

•

Find the CALIBRATE button located on

the monitor control board and press it

to enter the screen calibration mode.

•

Touch the center of the first cross that

appears on the screen. Once you re-

lease your finger, a second cross will

appear.

NOTE: You must hold your finger on
the cross for approximately 2 seconds
for the calibration to be recognized.

•

Touch the center of the second cross

that appears on the screen.

•

Once the second cross is touched and

released, another cross will appear on
the screen. To test the calibration of
the screen, touch the cross with your

finger and slowly drag your finger
around the screen. The cross should
follow your movement.

•

Touch the EXIT button.

FIGURE 1 - MONITOR CONTROL BOARD

SETUP

CALIBRATE

REMOTE SETUP/
CALIBRATE KEY

LCD

MONITOR CONTROLS

SECURITY KEY 1

Monitor Adjustment Procedure

The vertical/horizontal controls and bright-

ness/contrast controls are located on the

monitor control board. See Figure 1.

Unlock and open the top bezel so the control

board is accessible while viewing the moni-

tor. Pressing the button labeled Menu on

the control board will show the on-screen

display on the monitor. Adjust the monitor

controls until the screens look as suggested

in the following steps. When finished, close

and lock the bezel.

Set the game to the Quik Match game

screen.

Adjust the vertical and horizontal size

and vertical and horizontal position to

make sure that the game screen fills

the monitor screen and that the game

screen is centered.

Adjust the brightness and contrast con-

trols until the red tiles are a rich red and

the background is black. The numbers

on the tiles should be bright white. (Ad-

justing the brightness and contrast can

also correct for a lack of sharpness.)

General Circuit Board Handling

Information

Before handling any boards, observing the

following procedures to prevent electro-

static discharge:

Store the boards in the anti-static bags

in which they are shipped.

Remove any static charge from your

body before handling the boards.

Use a ground strap when handling the

boards.

•

When plugging in connectors to the

board, make sure the connector is

inserted straight onto the header and

that the connector covers all header

pins.

•

Do not connect any peripheral device

to the board, if the power is still

connected to the peripheral or if power

is already applied to the board.

CAUTION: Be extremely careful when
replacing the lithium battery on the
motherboard. There is a danger of ex-
p l o s i o n i f t h e b a t t e r y o n t h e
motherboard is incorrectly replaced.
Only replace the battery with the same
type recommended by the manufac-
turer. Dispose of used batteries ac-
cording to the manufacturer’s instruc-

tions.

3 MONEY SHOOT OWNER’S MANUAL PM0519-03

Cleaning the Cabinet

•

The cabinet should be cleaned with a

damp cloth and mild detergent. Always

apply the cleaner to the cloth and not

directly on the game. Liquids could

enter the cabinet and damage electron-

ics inside.

Cleaning the Touchscreen Monitor

•

The touchscreen glass should be

cleaned with a damp cloth and isopro-

pyl alcohol or a non-ammonia cleanser.

Do not use any abrasive or vinegar-

based cleansers, as they will damage

the touchscreen glass.

NOTE: DO NOT USE ANY ABRASIVE
SOLVENTS, ACID OR VINEGAR-BASED
CLEANSERS ON THE MONITOR OR
SIDE DECALS. OVER TIME, SUCH
CLEANSERS COULD HARM THE
TOUCHSCREEN AND ERASE THE DE-
CALS. BE CAREFUL NOT TO USE COM-
MERCIAL CLEANERS CONTAINING
ANY OF THESE SUBSTANCES.

Cleaning the Fans and Vents

•

The fans and vents should be cleaned

of any dust on a regular basis to en-

sure proper ventilation of the game.

•

To ensure proper operation of the

game, it is important that all fans are

operating correctly and that the airflow

is unobstructed. Make sure nothing is

placed inside the cabinet or next to the

fan vents that would inhibit the flow of

air. Also, if any fans are not operating,

it is important that they be replaced.

Watchdog Timer

This game has been equipped with a fea-

ture that allows it to automatically reboot if it

encounters a problem. When the watchdog

timer is enabled, it will reboot the machine

within 2 minutes after a failure, allowing the

game to automatically reset itself if a prob-

lem arises without needing a technician

present.

If you want to disable the watchdog timer,

set DIP switch 3 on the I/O board to the open

position and reboot the game.

NOTE: After turning the unit off, wait
60 seconds before restarting the unit.
This will ensure the game properly re-
sets.

PM0519-03 MONEY SHOOT OWNER’S MANUAL

5 MONEY SHOOT OWNER’S MANUAL PM0519-03

Main Menu

The Main Menu can be accessed by pressing the SETUP button inside the game. Use the

Main Menu to set up all game software options.

NOTE: For help with the Options in any menu section, touch the green “?” buttons
to bring up a help screen.

A summary of the Main Menu functions appears in the following table. For more detail, see

the corresponding sections of the manual.

FIGURE 2 - MAIN MENU

Main Menu

Available Options

Information

CREDITS

• Options

• Clear Credits

• Free Credits

Choose if game prices are viewed as
currency or credits. Default view is
currency. Add or clear free credits.

AMUSEMENT
GAMES

• Game Setup

• Options

Edit the game list (choose which games
are available and in what category they
appear on the Category menu), change
prices, and select game options.

AMUSEMENT HI
SCORES

• View/Clear Hi Scores

• Options

View and edit hi scores. Set scoring
options.

BOOKS

• Books Display

• Cash Settlement Setup

• Cash Settlement

Collection

The Books Screens display current and
lifetime credits information as well as
calculate the location and operator fees.

SYSTEM

• Set Time

• Security

• Set Game Serial

Number

• Volume Control

• Set 6 Star PIN

• Data Transfer

• Options

Set the game clock, security PIN and
protected features, serial number, 6 star
PIN, game volume, and system options
such as language control and theft
deterrent. Also use this menu to
transfer books data with a USB Pen.

PM0519-03 MONEY SHOOT OWNER’S MANUAL

Main Menu

Available Options

Information

DIAGNOSTICS

• Video Test

• I/O Test

• Touchscreen

Calibration

• Touchscreen Test

• View System Log

•

• Checksum Test

•

• System Info

• Enters the Video Test to display the

test screens. Touch the screen to
cycle through test.

• Tests the function of the I/O board,

DIP switches, meters, and lockout.

• Allows the operator to calibrate the

touchscreen. Follow the instructions
on the screen.

• Checks touchscreen calibration.

Touch the cross on the screen to
make sure it is accurately following
your movement.

• Displays operations performed by

the game.

• Checks the hard drive for missing or

corrupted files.

• Details the various hardware

components in the game.

TOURNACHAMP

• TournaCHAMP

setup screens

Enters the TournaCHAMP Setup
Screen if the game is registered for
TournaCHAMP play. See the
TournaCHAMP section of this manual
for more information.

TOURNAMENT

• Championship setup

screens

Enters the Tournament Menu Screen.
Enabling Championship Mode requires
the purchase of a separate kit.

PRESENTATION

• Operator Ad Screens Allows the operator to create ad

screens and upload custom screens
from a personal computer.

PROMOTION

• My Merit

• Options

• Enables a feature permitting players

to create custom accounts. Also
displays individual player data and
allows the operator to back up or
restore My Merit data.

• Enable My Merit, Merit Money, and

Promo Credits. These buttons will
appear in the Promotion Menu when
selected.

SKILL WITH
PRIZE (S.W.P.)

• Games

• Statistics

• Hopper Setup

• Set Security PIN

• Recharge Key

In these screens, edit the game list, and
view statistics for all games. Change
hopper settings and security PIN. You
can also view available gameplays and
use the Recharge Key to add more
gameplays.

MODE
CONFIGURATION

• Enable Amusement

Gameplay

• Enable S.W.P.

Gameplay

• Enable Tournament

Choose which modes of play will be
available to players.

7 MONEY SHOOT OWNER’S MANUAL PM0519-03

Amusement Games Menu

Game Setup

The game list, prices, and options are pro-

grammed using these screens. The first

screen shows the various game categories

and allows access to the following general

settings for all games.

FIGURE 3 - GAMES MENU: GAME SETUP

To Enter This Screen, Touch “Game

Setup” on the Games Menu and

Select a Category

Enable All Games Into Menu: Turns on

all games and defaults the price settings.

Factory Default Games Into Menu: Re-

turns the Game Setup to its default settings.

Games that were not originally enabled will

be turned off and all price settings will be

reset.

When you touch a category name, the next

Game Setup Screen shows the game posi-

tions available for that category and the price

for each game, with the list at the bottom

showing all games available for the selected

category. In categories with Merit-thon

games, players who choose Merit-thon play

one round of three different games in that

category for one combined score.

The Game Setup Screen also allows you to

make these general changes:

Default Games: Resets the selected cat-

egory menu to its default game and price

settings.

Enable All Games: Turns on all games

within the selected category and defaults

the price settings.

Clear One : Clears a selected item from the

player’s game menu.

Clear All: Clears all games from the player’s

game menu.

To customize a particular game list, first se-

lect a category on the first Game Setup

Screen. On the second screen, touch Clear

All to clear the game list. Touch the menu

position that you want a particular game to

occupy, then touch the desired game name

in the game list on the bottom of the screen.

Repeat until all desired games appear in the

menu. Games already in the menu will be

red in the game list at the bottom of the

screen.

To adjust price, touch the credit or currency

value next to each game.

To edit hi scores by game, select a game on

the first screen. Touch Clear All to remove

all hi scores for that game or remove an

individual score by touching Clear One .

Use this screen to manage hi scores. The

first screen allows you to clear all scores

for all games by touching Clear All Games.

Amusement Hi Scores Menu

FIGURE 4 - HI SCORES MENU:

VIEW/CLEAR HI SCORES

To Enter This Screen, Touch

“View/Clear Hi Scores” on the

Hi Scores Menu and Choose a Game

Books Menu

The Books Screens display the current and

lifetime credit totals for each game, as well

as the percentage of credits played per game

(the percentage for each game is the total

number of credits played on that game di-

vided by the total number of credits entered

into the machine).

Books Display

FIGURE 5 - BOOKS MENU: BOOKS

DISPLAY SCREEN

The books information can be sorted in three

ways by using the button that toggles through

the sorting categories. Unsorted displays

the books information in the standard order.

Sorted by Current displays the current

credits for each game from most to least

played. Sorted by LifeTime displays the

lifetime credits for each game beginning with

the most played game.

Touch Tournament Statistics to get the

books information for that mode of play only.

Touch Clear Current to erase all current

books data. Both the current screen and

the S.W.P. Statistics screen will be erased.

The date of the last data clear will appear at

the top of the Books Screen.

To Enter This Screen, Touch “Books

Display” on the Books Menu

FIGURE 6 - BOOKS MENU: BOOKS

DISPLAY SCREEN WITH GAME SELECTED

Books Display shows coin input data, as

well as Promotional Credits and Merit Money

(when these features are enabled). Touch

Total Coins to display individual coin input

statistics. The following is a guide to this

screen: 1A Coins = £2 (Value Added 20),

2B Coins = £1 (Value Added 10), 3C Coins =

50p (Value Added 5), 4D Coins = 20p (Value

Added 2), 5E Coins = 10p (Value Added 1),

6F Coins = £5, £10, £20 (Value Added 50/

100/200). Value Added is the amount of

meter pulses each unit of currency adds.

NOTE: Books data can be exported to
a file USB pen via the System Menu/
Data Transfer/Export Books feature.
The .dat file can then be viewed with
Wordpad after connecting the storage
device to a personal computer. The file
will display basic game information
such as the software version, the game
serial number, and date/time informa-
tion relating to books data. The file
will also show the current and lifetime
credit totals, as well as credit totals for

each game featured on the machine.

PM0519-03 MONEY SHOOT OWNER’S MANUAL

Touching a game name will display the cur-

rent and lifetime credit totals*. It also shows

the shortest, average, and longest playing

times for that game. Press OK to exit this

screen.

*Touching Trivia or Power Trivia dis-
plays totals by category.

10 MONEY SHOOT OWNER’S MANUAL PM0519-03

Cash Settlement Setup

The Cash Settlement Screens are used to

calculate the percentage of earnings the

operator and location will receive, as well

as any fees collected by the operator. This

will help to offset costs.

The first screens allow you to set up the

Cash Settlement Screen. Choose YES or

NO to display the operator’s cut on the Cash

Settlement Collection Screen and enter the

percentage of revenue the location will re-

ceive. Also, select the fee calculation

method. Select per month if you do not make

regular weekly collections or per week if

you collect every 7 days. Then touch NEXT.

NOTE: Monthly fee collections are
based on 4.3 week month. If you change
your fee calculation method, the game
will auto adjust the fees by multiplying
or dividing by 4.3 and rounding to the
nearest penny.

NOTE: Make sure the time and date
are set on the game in order to ensure
correct fee calculation.

The next screen allows you to set up the

fees. The amounts can be changed on-

screen by touching the amount itself and

using the keypad to enter a figure. The other

two columns display the cumulative totals

for each fee and the totals for the current

To Enter This Screen, Touch “Cash

Settlement Setup” on the

Books Menu and touch “NEXT”

FIGURE 7 - BOOKS MENU:

CASH SETTLEMENT SETUP SCREEN

FIGURE 8 - BOOKS MENU:

CASH SETTLEMENT SETUP SCREEN

collection period. Fees are calculated on a

prorated, per-day basis. Touch the NEXT

button to display more groups of fees. After

setting up the fees, touch FINISH to save

your changes.

Cash Settlement Collection

The Cash Settlement Collection Screens will

display the balance (Total Revenue minus

Total Fees minus Refill Amount minus S.W.P.

Payout) to be split between the operator and

the location. The Refill Amount represents

the amount of money put into the hopper by

the operator or bartender to complete

payouts.

Touch Revenue Details/Cash Out or Fee

Details for in-depth financial breakdowns.

Touch Clear/Complete Collection to fin-

ish. Cash Settlement totals will reset once

collection is complete.

FIGURE 9 - BOOKS MENU:

CASH SETTLEMENT SETUP SCREEN

System Menu

FIGURE 10 - SYSTEM MENU

Set Time

The Set Time Menu allows you to set both the time and date on
the game. Time is shown in 24-hour, "military" time (e.g. 5:00pm
= 17:00). Use the left and right arrows to find your time zone,
then touch your selection to continue.

Security Setup

The operator can set the PIN number and select which of the
features (Coin-In Menu, Free Credits, Game Menu, Hi Scores,
Books, All Options, and Set 6 Star PIN) will be protected by the
PIN. To change the PIN, enter the existing PIN (default is 0000),
then enter a new 4-digit number and touch SET on the keypad.
The game will prompt you to re-enter your PIN to confirm. After
confirming your PIN, touch the button for each of the features you
wish to protect with the PIN. NOTE: The Coin-In Menu is not
applicable for this unit.

Set Game Serial

Number

Use this screen to enter the game’s serial number.

Volume Control

Touch the volume control button to adjust the volume up or down.
You can sample the sound volume without exiting the screen.

Set 6 Star PIN

(only appears if
PIN is enabled)

Set the 6 Star PIN (between one and six digits) using this screen.
You can enable this feature and choose which options will be
accessible by 6 Star using the System Menu: Options Screen.
Touch an option box under System Menu: Options for on-screen
help. To access the selected options from the Player Menu
Screen, touch Options, then 6 Star.

Data Transfer

Transfer information (Books data, ad screens) using a USB Pen.

Options

For help with the Options in any menu section, touch the option
box to bring up a help screen.

PM0519-03 MONEY SHOOT OWNER’S MANUAL

11 MONEY SHOOT OWNER’S MANUAL PM0519-03

Diagnostics Menu

FIGURE 11 - DIAGNOSTICS MENU

Video Test

Touch the screen to cycle through a series of video test screens.

I/O Test

Tests the SETUP and CALIBRATE buttons, all coin channels, all 5
meters (Cash In, Cash Out, Hopper Refill, MegaNet Play, and Prize
Pool), and Door Open, Refill Key, and Note Acceptor switches. A green
light next to the appropriate button will register each time that item is
tested, and the number next to the item should increment by one with
each test. The I/O Test Screen also displays which DIP switches are
on or off.

Touchscreen
Calibration

Follow the on-screen instructions to calibrate the touchscreen.

Touchscreen
Test

Allows you to check the touchscreen calibration accuracy. The cross
should follow your finger exactly when you move it across the screen.

View System
Log

Displays a log of all operations performed by the game since the log
was last cleared. This information is helpful for customer service in
troubleshooting your game.

Checksum Test

Checks the hard drive for missing or corrupted files. With STOP ON
ERROR? set to YES, a message indicating which file is corrupted will
be shown whenever the game encounters an error. With STOP ON
ERROR? set to NO, a list of corrupted files will be displayed when the
test is complete. If errors are detected, the software on the drive may
need to be reloaded. If this does not solve the problem, the drive may
require replacement. The test could take up to 30 minutes.

System Info

Gives details about the following:
•

processor type and speed

•

motherboard manufacturer

•

amount of memory

•

Ethernet card manufacturer

•

sound chip type

•

video chip type

•

touchscreen manufacturer

•

hard drive manufacturer and capacity

•

modem part identification number

•

fan speed (FORCE games only)

FIGURE 12 - PROMOTION MENU

The My Merit feature allows individual play-

ers to create custom accounts accessible

via PIN numbers. Accounts can be created
by touching the

My Merit button on the

Player Menu Screen or by accepting the

option to create an account after achieving

a Hi Score.

Players will then have the choice to log in

to their accounts through the My Merit but-

ton on the Player Menu and have personal

data stored on the machine. Players can

view their hi scores and the number of

games they’ve played in My Merit mode for

the past year.

NOTE: My Merit data will be cleared
when a software update is performed.
Be sure to back up the data before up-

dating the game.

View Player Data

Select My Merit from the Promotion Menu,

then touch View Player Data to bring up a

list of all players with My Merit accounts.

Touching a player’s name will bring up the

PIN, total number of games played, and date

the account was created. The Show Hi

My Merit (FORCE Games Only)

NOTE: My Merit is only available in
Amusement mode. Players who are
logged into My Merit and switch to
S.W.P. or Tournament mode will auto-
matically be logged out of My Merit.

FIGURE 13 - MY MERIT OPTIONS

Presentation Menu

The Presentation Menu allows operators to

create ad screens and upload custom

screens created on a personal computer.

Operator Ad Screens

A total of 24 advertising screens can be

created with the software and added to the

game. The ads will appear along with the

other attract screens when the game is in

idle mode. Custom images for ad screens

can also be added to the game using an

appropriate storage device for your game

(USB pen or CD). Touch the green ? but-

tons on each screen for information on how

to create ad screens and add custom

screens to the machine.

In addition, a program for adding up to 120

additional ad screens can be downloaded

from our Web site (www.meritind.com) in

the Support/Software Downloads section.

FORCE games only: A USB Pen Kit (kit num-

ber KAV-100-008-01) is available. To order,

contact your authorized Merit distributor.

Promotion Menu

The Promotion Menu is designed to encour-

age player interest. Use the Options but-

ton to enable each feature. Once an option

is enabled, the button will appear in the

menu.

PM0519-03 MONEY SHOOT OWNER’S MANUAL

13 MONEY SHOOT OWNER’S MANUAL PM0519-03

Scores button will display a list of the

games on which the player has the hi score

and the score itself. If desired, the opera-

tor can also reward the player with free

credits through the View Player Data

Screen.

Show Game Play Frequency

This feature shows the number of games

played by each My Merit player. The op-

erator can choose whether to display all

totals or just those that fall within a certain

date range.

Show Player Hi Scores

Selecting a game name under this feature

will bring up the Hi Scores of each My Merit

player for that game, as well as the date

the score was achieved. The operator can

choose whether to display all Hi Scores or

just those that fall within a certain date

range.

Backup/Restore

My Merit data can be backed up or restored

with a USB pen. After connecting a pen to

the machine, touch this button to proceed

with backing up or restoring all My Merit

data. USB pen kits (kit number KAV-100-

008-01) are available. To order, contact

your local distributor.

NOTE: Restoring My Merit data from
a storage device will erase any My
Merit data currently on the game.
Conversely, backing up data onto the
USB pen will also overwrite any exist-
ing My Merit data on the USB pen.

Merit Money

The Merit Money screens allow location

owners to encourage game play by offer-

ing free games (not free credits) at certain

time intervals via the 6 Star Feature. Select

days of the week, time frames, and the

number of free games (1-10 per day) to be

awarded, as well as a PIN number for lo-

cation owners to use to access Merit

Money through 6 Star. Location owners

can enable Merit Money by entering that

specific PIN in the 6 Star screen. One free

game is given away each time the location

enters the code until the predetermined daily

limit is reached. Free games expire after

10 minutes, when money is deposited into

the machine, or when the Merit Money time

period comes to an end.

Promo Credits

The Promo Credits feature generates inter-

est by offering operator-controlled free

credits while the game is in idle mode. Se-

lect days of the week, time frames, idle

time (number of minutes the game is in idle

mode before free credits are offered) and

the number of credits (1-10) to be awarded.

A message announcing that free credits

are available will appear on the screen

during idle mode when Promo Credits go

into effect. Promo Credits expire after 10

minutes or when the Promo Credits time

period comes to an end.

S.W.P. Menu

PM0519-03 MONEY SHOOT OWNER’S MANUAL

Skill With Prize mode rewards players with

coin jackpot payouts. When predetermined

score levels are reached, players earn

money that is put in a Bank. The amount in

the Bank is displayed on the Player Menu

Screen. At any time, players can press

Cash Out to collect their winnings. In other

modes, touch the Bank button, then press

Cash Out.

If a player runs out of credits, money from

the Bank can be converted to credits in £1

increments to pay for continued play.

The game list is programmed using the

Games Setup Screen. Select the Game Sta-

tus for each game by touching Auto,

Locked In, or Disabled. Use the scroll

bar on the right to scroll through all games.

Auto: The game will rotate in and out of the

player menu based on popularity. Use the

arrows under Rotation Frequency to

choose how often the game’s popularity is

calculated (1-6 weeks). The default setting

is 4 weeks. To disable the auto adjust fea-

ture, set Rotate Game to No.

Locked In: The game will always appear

in the menu.

Disabled: The game will never appear in

the menu.

NOTE: If Rotate Game is set to No, but
some games are set to Auto, they may
appear in the Player Menu if the maxi-
mum number of games are not locked
into the menu.

The auto-rotation time period is reset each

time the Clear/Complete Settlement but-

ton is pressed in the Books: Cash Settle-

ment Menu or Clear Current is selected in

the Books Menu: Books Display Screen.

FIGURE 15 - S.W.P. MENU:

STATISTICS SCREEN

To Enter This Screen, Touch

“Statistics” on the S.W.P. Menu

The S.W.P. Statistics Screen shows finan-

cial statistics, including Profit, Cash In, Cash

Out, Payout %, and Days (days the game

has been on the Player Main Menu). These

reports can be toggled in the second col-

umn by pressing Last (last collection pe-

riod), Lifetime, and Lifetime Since (since

last payout percentage change). Current

statistics will always display in the first col-

umn. Press Dump Data to USB Pen to

transfer game statistics. The data can then

be viewed by using WordPad.

Touch individual game names for the num-

ber of payouts at each level, total games

played, and total winning games since the

last target payout change.

To Enter This Screen, Touch

“Games” on the S.W.P. Menu

FIGURE 14 - S.W.P. GAMES MENU:

GAMES SETUP SCREEN

Game Setup

Statistics Screen

15 MONEY SHOOT OWNER’S MANUAL PM0519-03

Hopper Setup Screen

To Enter This Screen, Touch “Hop-

per Setup” on the S.W.P. Menu

The Hopper Setup screen allows you to ad-

just the hopper settings. The hopper is used

solely for Skill With Prize payouts. To estab-

lish funds for player payouts, the operator

must manually load (“top-up”) the hopper

with £1 coins only. Unlock and raise the top

and monitor bezels to access the hopper.

Lift the cover off the hopper and fill. Line up

the cover with the left corners of the hop-

per, then snap into place. At collection, the

amount in the hopper should be separated

and returned to the appropriate party. The

remaining funds in the coin box and over-

flow bucket can be split as desired.

Actual Float: Current number of coins in

the hopper. After a Hopper Top-Up, this num-

ber will change to the number of coins the

operator selected using the Hopper Top-Up

buttons. The Actual Float will never be higher

than the last top-up amount. Excess coins

entered through the Refill Key screens or

the coin acceptor will be rerouted to the

overflow bucket. The operator must enter

the correct amount as the original Actual

Float value for proper functionality.

Hopper Top-Up: Select the number of

coins manually placed in the hopper. Choose

from 70 pounds, 125 pounds, or touch the

Set Custom arrow to select a custom

FIGURE 16 - S.W.P. MENU:

HOPPER SETUP SCREEN

amount between 40 and 200 pounds. Use

the numeric keypad to enter an amount, then

touch the corresponding button. The se-

lected top-up amount is the maximum amount

the hopper will hold.

NOTE: After selecting a custom
amount, you must touch the button with
that amount displayed for the Actual

Float value to update.

Hopper Dump: Use the Hopper Dump but-

tons to dump coins from the hopper to the

payout tray. Touch the corresponding but-

tons to individually dump coins, dump the

amount last “topped-up,” or empty the entire

hopper. If the actual float of the hopper is

less than the amount selected for hopper

dump, “Short £(X)” will flash on-screen.

NOTE: The operator must enter the
correct amount as the original Actual
Float value for proper functionality.
If the operator enters an Actual Float
amount different than the actual coins
input in the hopper, “Dump All” will
not function properly and an error
message will display. If the wrong Ac-
tual Float amount is entered, and an
error does not display, press the
“Dump All” button once, then again,
to remove all coins. An error message
will display the amount of coins over
the Actual Float. Calculate the true
Actual Float by adding the initial dis-
played Actual Float amount and the
error amount.

Target Payout: The default setting is 30%.

Press the Set Payout % arrow and use the

numeric keypad to change the amount. The

minimum is 30% and the maximum is 50%.

Hopper Refill

When the hopper contains 20 or fewer coins,

“Hopper is Low. Please Refill” will dis-

play on the SETUP Main Menu. If more money

is needed to complete a player payout, “Ser-

vice Machine. Please See Attendant”

will display on the Player Menu Screen.

Press OK to clear this screen.

PM0519-03 MONEY SHOOT OWNER’S MANUAL

You can open the game and directly refill the

hopper. See the Hopper Setup section of

this manual.

The hopper can also be refilled without en-

tering the SETUP screens. Turn the Refill

Key (see Figure 20). Keep the key in this

position, then insert the desired amount of

£1 coins directly into the coin acceptor to

refill. On the Landlord Audit screen that

displays, the following information is stored:

Last Bank: Current amount in the player’s

bank.

Last Win: Most recent amount won by

player.

NOTE: The Refill Key cannot be used

while in the SETUP Menu Screens.

To display the Operator Audits screen,

open the top bezel, then turn the Refill Key

and begin entering £1 coins into the coin

acceptor. This screen shows Last Bank ,

and Last Win in addition to the following:

Cash In: Total coin input or transferred cred-

its (winnings in bank used as credits instead

of paid out).

Cash Out: Total winnings paid to players.

Coins in Hopper: Number of coins cur-

rently in the hopper.

NOTE: The Audits Screen will reset
when the Books are cleared or a col-
lection is completed.

If the game still owes a player winnings, the

error “Last Payout Incomplete, still to

pay £(X)” will display on both of the refill

screens. Once the hopper is refilled, a

Complete Payout button will display.

Touch this button so the player will receive

the rest of their winnings.

Remove the Refill Key when you are done

refilling the hopper.

FIGURE 17 - S.W.P. MENU:

SET SECURITY PIN SCREEN

Set Security PIN Screen

This PIN is used to access the SETUP Main

Menu and is entered at the keypad that

displays after opening the top bezel. To

change your PIN, press the Set Security

PIN button. Use the keypad to enter your

desired PIN number, then press ENTER.

Recharge Key

See the Recharge Key Instructions sheet

provided with your Money Shoot Recharge

Key Kit for more information.

Mode Configuration Menu

Check the boxes to choose which

gameplay modes are activated. If none are

selected, the game will default to Amuse-

ment mode. If Tournament is selected,

choose between TournaCHAMP and Cham-

pionship Edition.

Tournament modes may require the pur-

chase of additional kits. A Modem Installa-

tion Kit (part number KUV-113-001-01) and

a Championship Edition Kit (part number

KUV-113-003-01) are available for pur-

chase through your Merit distributor

NOTE: If no tournaments are running,
do not select Tournament mode as the
only enabled play mode.

IMPORTANT! Before turning off or
switching Tournament modes, com-
plete a Cash Settlement Collection.
See the Books section of this manual

for more information.

DIP SWITCH SETTINGS

The following table provides information on the functionality of the hard DIP switches in
Megatouch games. Make sure to read the information in the Notes column to determine
what is affected when performing these functions. After performing any DIP switch
function, make sure to follow the instructions on the screen. In most cases, you will be
instructed to reset the DIP switch in order to reboot the game. If you fail to reset the DIP
switch before rebooting, it could result in corruption of the hard drive.

NOTE: In FORCE 2005 and Jade software, the DIP switch functionality is built into the
software. To access the DIP switches through the software, turn off the game, set DIP
switch 1 to the closed position then turn the power on. When the message “Please
reset DIP 1 to proceed” appears, reset DIP 1 to the open position. The Merit diagnostics
page will appear. Touch ? for information on DIP switch functionality. Touch the specific
DIP switch to activate it. Touch X to exit.

FORCE 2003 / MAXX Ruby and greater

DIP#

Function

Usage/Notes

Motherboard
configuration &
checksum test

• Configures the CMOS settings on the motherboard to Merit

specifications and checks the files on the hard drive.

A checksum test should be performed when the game is locking
up or rebooting. If the test fails, the program should be reloaded
onto the hard drive. After reloading, perform another checksum
test. If it fails again, the hard drive should be replaced.

Hardware
configuration

• Identifies system hardware and configures the motherboard.
A hardware configuration occasionally needs to be performed
after a kit is installed and the touchscreen is not responding to
touch or the calibration is off.

5 & 7

Memory clear
for
TournaCHAMP
and
TouchTunes®

• Clears the login name, password, access phone number, and

all call-in settings for TournaCHAMP users.

• Clears all the loaded albums for TouchTunes users.

• Clears current books, coin-in, high scores and resets the

software options.

A memory clear should be performed when a game is not able
to connect to TournaCHAMP and there is some question about
the information in the Dial-Up Network Screen being correct.
After performing a memory clear, TournaCHAMP setup
information must be re-entered, and an Update From Server
should be performed.
NOTE: TournaCHAMP games must perform an “Update
From Server” BEFORE performing a memory clear.

4 & 7

Complete
memory clear

• Clears ALL memory on hard drive including the

TournaCHAMP player database, TournaCHAMP settings,
advertising screens, bookkeeping, high scores, coin-in,
options, etc. It resets the game to the factory defaults. It also
marks bad sectors on hard drive.

A complete memory clear should only be performed when the
game is locking up or resetting and it has passed the checksum
test. After performing a memory clear, the player database
should be reloaded, TournaCHAMP setup information must be
re-entered, and an Update From Server should be performed.
NOTE: TournaCHAMP games must perform an “Update
From Server” BEFORE performing a memory clear.

Watchdog
Timer (EVO,
Fun Zone,
Fusion &
Money Shoot)

• When the watchdog timer is enabled, it will reboot the

machine within 2 minutes of a failure, allowing the game to
automatically reset itself if a problem arises.

17 MONEY SHOOT OWNER’S MANUAL PM0519-03

Merit Industries, Inc.
Troubleshooting Guide for Megatouch FORCE™ Games

PROBLEM

CORRECTIVE ACTION

•

no power

•

bill acceptor
motor does not
run

•

no flash on the
monitor screen

•

no cooling fans
operating

•

no output from
power supply

•

Check that the power cord is connected to a “live” outlet.

•

Check that the power switch is on.

•

Check t hat the power cord is connected to the game power supply.

•

Check that the power supply’s voltage select switch is set to the
proper voltage.

•

Check the harness connections to the on/off switch and circuit
breaker.

•

Check the circuit breaker for an “open”.

•

Check the A/C harness connection to the power supply.

•

Check the line cord.

•

no video

•

no cooling fan
operation

•

screen is blank

•

A/C power to the
monitor and bill
acceptor

•

no output from
power supply

•

Check the power on jumper wire located on the motherboard. It
should connect J2 to pin 21 of Panel 1. If this jumper wire is missing
or not connected between the correct pins, it may prevent the power
supply from turning on. For more information, see Tech Note 52.

•

Check the D/C harness connection to the motherboard.

•

Check the A/C harness connection to the power supply.

•

no video

•

cooling fans are
working

•

there is a sound
when coins are
deposited

•

Check the video cable connections to the motherboard and the LCD
display.

•

Check the harness connections between the PC board s on the back
of the LCD display.

•

Replace the LCD display.

•

no video

•

constant beeping
or a sequence of
beeps

•

The memory card (DIMM) may not be seated properly. Reseat the
DIMM or replace it.

•

no video

•

no sound when
coins are
deposited

•

Check all connections to the motherboard.

•

Reseat the DIMM.

•

Replace the motherboard or send it for repair.

•

poor picture
quality

•

Adjust Brightness, Contrast, Horizontal, and Vertical controls with
monitor controls.

•

coin jam

•

Check the coin mech and coin chute for coins blocking the pathway.

•

Make sure the coin harness is connected between the normally
open and common terminals on the coin switch.

•

Disconnect the bill acceptor and the coin switch one at a time to
narrow down the problem.

•

Check the coin harness for pinched or damage d wires.

•

Disconnect the coin harness from J1, J3, J7, and J8 of the I/O
board. If the coin jam still appears, the I/O board will have to be sent
for repair.

•

meter not
advancing

•

Check connection at I/O board.

•

Check wiring at J2 METER connector on I/O board.

•

“INVALID KEY”
message while
downloading
software to the
hard drive

•

If the security key was replaced before the download:· The
motherboard did not boot from the CD -ROM drive.·

•

Check that the CD-ROM drive is set as master.

•

Check the ribbon cable connections between the CD-ROM drive
and the motherboard.·

•

Try another CD-ROM drive or another set of CDs.

•

“CRITICAL
ERROR ABORT
RETRY FAIL” or
“BAD COMMAND
OR FILE NAME”
error

•

Try reloading the program onto the hard drive with a different set of
update CD’s compatible with the security key. If it will not accept the
download, try another CD-ROM drive. If it still does not work,
replace the hard drive.

PM0519-03 MONEY SHOOT OWNER’S MANUAL

Merit Industries, Inc.
Troubleshooting Guide for Megatouch

FORCE™ Games continued

PROBLEM

CORRECTIVE ACTION

•

game locks up or
resets while
being played or
in the attract
mode

•

no movement on
the screen

•

power has to be
cycled off and on
to get the game
to function again

•

Clean the vents and the fans of any dust and dirt that may interfere
with airflow.

•

Clean the CPU cooling fan on the motherboard.

•

Replace the CPU cooling fan if it is not operating properly.

•

Reseat the DIMM on the motherboard.

•

Clear memory with the following procedure:

•

Turn off the game.

•

Press and hold the Setup and Calibr ate buttons.

•

Turn the game on and keep holding the buttons until the
screen displays “TWO BUTTON CLEAR DETECTED
RELEASE BUTTONS”. This should take about 30 seconds.

•

Release the buttons. This will clear high scores, clear the
books and reset options, and re set the game menu and coin
menu to their factory settings.

•

Perform a checksum test on the hard drive:

•

Turn off the game.

•

Turn on DIP switch 8 on the I/O board.

•

Turn on the game. The test will take about 10 minutes.

•

A failure will cause the test to stop.

•

A passed test will display “DRIVE CHECKSUM
COMPLETE RESET ALL DIP SWITCHES TO REBOOT
MACHINE”.

•

With power on, turn off DIP switch 8.

•

game locks up
with “invalid key
for version
PG3002 – V
XXXX”

•

Check the program number on the security key. It should be
compatible with the program on the hard drive.

•

Check the contacts on the security key socket. Lift up on the contact
on the bottom of the socket and make sure there is a good
connection to the base of the security key.

•

Check the USB cable that connects the I/O board to the
motherboard.

•

Check jumpers JP5 and JP6 on the I/O board. The USB cable can
be connected to two connectors on the I/O board (J5A and J5B).
The position of the shunts on jumpers JP5 and JP6 will enable
either J5A or J5B. The shunts should be positioned towards the
connector where the USB cable is connected. For more information,
see Tech Note 55.

•

Try another security key with the same program number or test the
security key in another game with the same program version.

•

"DISK BOOT
FAILURE"

•

This message indicates the motherboard is not receiving data from
the hard drive and has locked up.

•

Check the IDE ribbon cable connections to the motherboard and
hard drive.

•

Check the power to the hard drive. It should have +5 volts, +12
volts, and ground.

•

“QUANTUM
FIREBALL,
SMART FAILURE
DETECTED,
BACK UP HARD
DRIVE”

•

The self-diagnostics on the hard drive has detected an error.· The
hard drive will have to be replaced.

19 MONEY SHOOT OWNER’S MANUAL PM0519-03

Merit Industries, Inc.
Troubleshooting Guide for Megatouch

FORCE™ Games continued

PROBLEM

CORRECTIVE ACTION

•

game will not
download CD

•

Make sure the CD is installed correctly, with the logo facing up.

•

Check for scratches or a defective CD.

•

Try a different CD -ROM drive or another set of CDs.

•

If you’re downloading a CD set, make sure eac h CD is of the same
revision.

•

"ERROR
READING DRIVE
C"

•

This message can be caused by the hard drive or in some
program versions, a coin jam while the game is turned on.

Turn the game off.

Locate DIP switch 8 and turn it on.

Turn on power to the cabinet. This will start the
hard drive checksum test, which should take about
20 minutes to complete.

When the hard drive passes the test it will display
a "CHECKSUM GOOD" message and continue to
boot up into the game attract screens. This
indicates a coin jam.

When the hard drive fails the test, the game will
lock up with a "CHECKSUM ERROR" message,
which will stay on the screen until the power is
turned off. In this case, the hard drive will have to
be replaced.

•

"DISK BOOT
FAILURE"

This message indicates the mo therboard is not receiving data from the
hard drive and has locked up.

•

Check the IDE ribbon cable connections to the motherboard and
hard drive.

•

Check the power to the hard drive. It should have +5 volts, +12
volts, and ground.

•

“QUANTUM
FIREBALL,
SMART F AILURE
DETECTED,
BACK UP HARD
DRIVE”

The self-diagnostics on the hard drive has detected an error.

•

The hard drive will have to be replaced.

•

“CRITICAL
ERROR ABORT
RETRY FAIL” or
“BAD COMMAND
OR FILE NAME”
error

•

PM0519-03 MONEY SHOOT OWNER’S MANUAL

FIGURE 19 - FRONT VIEW, CLOSED BEZEL

21 MONEY SHOOT OWNER’S MANUAL PM0519-03

TOP BEZEL LOCK
(2 LOCKS)

DRINK ARM (2)

PAYOUT TRAY

BOTTOM DOOR

COIN ACCEPTOR

TOP BEZEL

BILL ACCEPTOR

FIGURE 20 - REAR VIEW

PM0519-03 MONEY SHOOT OWNER’S MANUAL

ETHERNET
COUPLER

PHONE

COUPLER

POWER

SWITCH

DETAIL VIEW OF

POWER ENTRY ASSEMBLY

REFILL

KEY

ELECTRONICS
BOX

LOCKED COIN
BOX DOOR

BILL ACCEPTOR

MAGAZINE

STACKER

COIN BOX
CHUTE

OVERFLOW
CHUTE

TOUCHSCREEN
CONTROLLER

BEZEL

BRACKET

PAYOUT TRAY

CHUTE

DONGLE

HOPPER

COIN MECH

FIGURE 21 - FRONT VIEW WITH ALL BEZELS OPEN

23 MONEY SHOOT OWNER’S MANUAL PM0519-03

SCREWS SECURING

ELECTRONICS BOX

COVER (4 PLACES)

POWER

SUPPLY

SECURITY

KEY

METERS

CENTRONICS

UPGRADE

CONNECTOR

I/O BOARD

HARD DRIVE

MOTHERBOARD

MONITOR
CONTROL
BOARD

LCD

TOUCHSCREEN

SLIDING

LOCK

FIGURE 22 - DETAILED VIEW OF MONITOR ASSEMBLY

FIGURE 23 - DETAILED VIEW OF ELECTRONICS BOX WITH DOOR OPEN

PM0519-03 MONEY SHOOT OWNER’S MANUAL

Megatouch Money Shoot Replacement Parts List

NOTE: The parts in your game may vary. When calling for replacement
parts, make sure to have your serial number available to ensure the accuracy
of your order.

NOTE: In order for your Megatouch FORCE game to function properly, the
hardware must only be replaced with FORCE hardware. Replacing the
motherboard, I/O board, hard drive or touchscreen controller with hardware
that is not specific for FORCE will eliminate some of the FORCE software
features.

For additional assistance, after contacting your distributor, contact:

CVA Customer Service

020.8594.1234

Merit Industries, Inc. P.O. Box 5004, Bensalem, PA 19020-8529.

You can also visit our Web site

www.meritind.com

R E P L A C E M E N T C O M P O N E N T S

M O N E Y S H O O T ( G 2 1 - 1 1 6 - 0 0 1 - 0 1 )

P A R T N U M B E R

D E S C R I P T I O N

S A 1 0 0 5 7 - 0 7

M O T H E R B O A R D

E C 9 7 0 2 - 0 9

S M I L E Y B I L L A C C E P T O R , U K

E C 7 5 3 6 - 0 1

P O W E R S U P P L Y , 1 2 5 W ± 1 2 , ± 5 , + 3 . 3

E C 9 8 5 1 - 0 3

1 7 " T O U C H S C R E E N O V E R L A Y

E C 9 3 8 4 - 0 2

1 7 " L C D D I S P L A Y

E C 9 8 4 0 - 1 0

M I C R O T O U C H S M T 4 T O U C H S C R E E N C O N T R O L L E R

S A 3 0 9 4 - 1 1

U K , 2 N D , S W P 2 K 5 K E Y

S A 3 0 9 5 - 1 1

U K , 1 S T , S W P 2 K 5 K E Y

P A 3 0 2 2 - 0 1

F O R C E 2 0 0 5 . 5 H A R D D R I V E

25 MONEY SHOOT OWNER’S MANUAL PM0519-03

Connection Diagrams

FIGURE 24- CONNECTOR SIDE OF ECS MOTHERBOARD

CENTRONICS
CONNECTION

(SECONDARY IDE)

HARD DRIVE
CONNECTION
(PRIMARY IDE)

VGA

VIDEO

TOUCHSCREEN

CONTROLLER

(COM 1)

I/O BOARD

ETHERNET

AUDIO OUT

MOTHERBOARD

POWER

TOP VIEW OF MOTHERBOARD

FIGURE 25 - I/O BOARD DRAWING

PM0519-03 MONEY SHOOT OWNER’S MANUAL

SETUP

J2
METER 1

J19
METER 2

CALIBRATE

MECHANICAL

MECH

SMILEY BILL

ACCEPTOR

ELECTRONIC

MECH

J6
POWER
CONNECTOR

SECURITY KEY

J31

DONGLE

CONNECTOR

Megatouch TournaCHAMP™ Edition

NOTE: For all U.K. operators, U.K. TournaCHAMP™ Central Administration will provide the

Internet Service for dial-up connections. You can choose to use your own ISP but certain

large Internet providers like AOL™, CompuServe™, Prodigy™, and NetZero™ utilize a

proprietary dial-up protocol that is not industry standard and may not work with

TournaCHAMP™. Some of the major providers that are compatible with TournaCHAMP™

are ATT Worldnet™, Sprint™, Erols™, Tymenet™, and EarthLink™, and most of the smaller

local Internet providers. You can also now choose between Dial-Up, Automatic, and Manual

Internet access. Dial-up uses the internal modem and standard phone line and Automatic

and Manual use cable or DSL modems. You must have your own ISP to use the Automatic

or Manual connection methods.

Overview

Merit’s TournaCHAMP™ is a fully automated Tournament system designed to network

Megatouch games over the Internet, for the purpose of playing in tournament games. All

Tournament configuration and maintenance is controlled by a central server, which is man-

aged by Merit’s Tournament Manager. Placing the Tournament Management responsibilities

in the hands of a Tournament Manager greatly simplifies the operator’s role.

The system allows any number of Megatouch games to participate, by connecting to the

server over the Internet. To participate, an operator only needs to fill out the Game Start-Up

Form and fax it to U.K. TournaCHAMP™ Central Administration at 020 8594 1235, install the

kit into an existing game and connect the game to the Internet.

Players register directly on the game and only need to register once for any tournaments run

by that server. Scores are based on the average of five games, with the winner(s) having

the highest average score.

TournaCHAMP™ is a tournament promotion system, allowing players to compete for a prize

pool based on the income from premium-priced tournament games. The top scorer(s), at the

completion of a tournament, is entered into the Winners List for retention until they claim their

prizes.

Players who achieve a winning score(s) during a tournament must enter their name, along

with their own personal identification number (PIN). Should they win in that tournament, the

PIN will be used to ensure positive identification of the player. Provided an attendant is

present, prizes may be claimed anytime after the completion of a tournament. Once the prize

is awarded, it is noted on the Winners List and is accounted for in the bookkeeping statistics.

The operator can choose to collect and pay the prize money, have TournaCHAMP™ Central

Administration collect and pay the prize money or chose to do both.

27 MONEY SHOOT OWNER’S MANUAL PM0519-03

TournaCHAMP Installation Instructions

Dial-Up Internet Setup

If you are using a broadband Internet con-

nection, skip to Broadband Internet

Setup.

Connect the supplied phone cable to

the phone coupler (bottom coupler) on

the outside of the game. If the phone

cable has a ferrite attached to the end

of it, make sure this end is closest to

the game.

Plug the other end of the phone cable

into the provided telephone adapter.

Then plug the adapter into a telephone

socket.

Continue with On-Screen Configu-

ration Guide .

Broadband Internet Setup

NOTE: A broadband router is required
i n o r d e r t o c o n n e c t M e g a t o u c h
games to a broadband Internet con-
nection. You will need either a broad-
band router with a built-in broadband
modem or a broadband router and an
external broadband modem. If you
are also linking games, you may also
require a router with a built-in hub or
an external 10 BASE-T Ethernet hub de-
pending on how many games you are
linking and how many available ports
are on the router. (Hubs are available
from your distributor as a separate
part, EC0030-01, or at your local com-
puter store.)

NOTE: Your broadband Internet con-
nection should already be connected
and configured using the instructions
provided by the manufacturer and by
your Internet Service Provider before
continuing with this installation.

Turn off the game and disconnect it

from its power source.

Connect the supplied Ethernet cable to

the Ethernet coupler (top coupler) at

the back of the game. If the Ethernet

cable has a ferrite attached to the end

of it, make sure this end is closest to

the game.

Connect the free end of the Ethernet

cable to the broadband router.

Continue with On-Screen Configu-

ration Guide .

PM0519-03 MONEY SHOOT OWNER’S MANUAL

If your game did not come equipped with a modem, you must purchase an

additional Modem Installation Kit (part number KUV-113-001-01) to utilize

TournaCHAMP mode.

On-Screen Configuration Guide

In order to continue with this On-Screen

Configuration Guide, your Game Start-Up

Form must be filled out and received by U.K.

TournaCHAMP Central Administration.

Press the SETUP button and enter your

PIN to access the Main Menu.

Touch the Mode Configuration but-

ton. Ensure that Enable Tournament is

selected and TournaCHAMP is chosen.

BUTTON

DESCRIPTION

INTERNET

SETUP

Accesses Tournament Set-Up.

GENERAL

INFO

Shows location information, last
successful update and attempted
updates.

CONNECTION

LOG

Displays the last 15 update attempts.

SET UPDATE

TIME

Select the daily time for the machine
to update information and rankings
from the Tournament server.
NOTE: GAME MUST BE TURNED
ON IN ORDER TO UPDATE. If it is
not turned on at the scheduled time,
it will dial in the next time the
machine is turned on.

UPDATE

FROM

SERVER

Updates Tournament game rankings
and game information from your
machine to the Server.

CLEAR

DATABASE

Erases ALL Tournament, Location,
or Player information from the
machine. After selecting Clear
Database the game will prompt you
to select which database to clear.
CAUTION: CLEARING THE
DATABASE MAY CAUSE A LONG
DOWNLOAD ON THE NEXT
UPDATE.

FIGURE 2 - TOURNACHAMP MENU SCREEN

At this screen, touch the Internet

Setup button (see Figure 2) to access

the Internet Setup Screen.

At the Internet Setup Screen, select

Dial-Up, Automatic, or Manual de-

pending on how you are connecting to

the server.

Dial-Up: This connection method uses

a standard phone line and

TournaCHAMP Central’s ISP or your

own ISP. For Dial-Up connections, con-

tinue with step 6.

Automatic: The automatic setting is

for cable or DSL connections using dy-

namic IP addresses. Contact your

Internet service provider if you are un-

sure of what kind of IP address they

use. For Automatic connections, con-

tinue with step 12.

Manual: The manual setting is for

cable or DSL connections using static

IP addresses. Contact your Internet

service provider if you are unsure of

what kind of IP address they use. For

Manual connections, continue with step

14.

29 MONEY SHOOT OWNER’S MANUAL PM0519-03

FIGURE 1 - TOURNACHAMP MENU SCREEN

Return to the Main Menu and touch the

TournaCHAMP button. The Set Game

Serial No. Screen will appear. At this

screen, enter the game’s serial num-

ber and touch ENTER. The game will

then prompt you to enter the time zone.

The times are listed using Greenwich

Mean Time. Scroll through the list to

find your time zone and select it by

touching it. The game will then return

to the TournaCHAMP Menu.

Dial-Up Only

After selecting Dial-Up, touch the Dial-

In Setup button. This will take you to

the Dial-In Setup Screen. See Figure 4.

At this screen, touch YES or NO after

Wait For Dial Tone depending on

whether or not you have to wait for a

dial tone before dialing. Select a dialing

method (either tone or pulse). In the

Include Area Code section, select

YES or NO depending on whether or

not you have to use an area code to

dial local number. If you need to use a

dialing prefix (such as a number to

reach an outside line) use the keypad

to enter the number. Insert a comma

after the number if an internal phone

system needs time to connect to an

outside line or to wait for a dial tone.

Each comma forces a delay of one

second before dialing. Select the speed

of the dialing (it is recommended that

this remain at FAST unless there is a

problem dialing out). Select to have the

modem sound turned off, quiet or loud.

After all of these settings have been

entered, touch the < button to return to

the Dial-Up Network Screen (see Fig-

ure 3).

At this screen, select USE MY OWN

ISP. The game will prompt you to enter

the access phone number, login name

and password. Touch the NEXT but-

ton to successfully enter in all the re-

quired fields. Then, touch the YES but-

ton to establish connection and begin

the registration process.

After connection has been established,

your information will appear on the

screen. Touch the YES button to con-

firm the entered information.

To Enter This Screen, Touch the

“Dial-In Set-Up” Button at the

Internet Setup Screen.

FIGURE 3 - DIAL-IN SETUP SCREEN

10. Touch the < button. At this screen,

touch the Update From Server but-

ton. The game will connect to the server

(see Figure 4). Your first connection

may take up to 40 minutes.

11. To confirm that a proper connection took

place, touch the Connection Log but-

ton on the TournaCHAMP Menu

Screen. If there were no errors, you

will see “SUCCESSFUL” at the Con-

nection Log Screen (see Figure 5). If

there is an error message, check the

troubleshooting guide and follow the

corrective action to fix the problem.

Touch the X button on the Connection

Log Screen and confirm that you want

to exit out of the setup screens. Con-

tinue with Beginning Tournament

Play.

PM0519-03 MONEY SHOOT OWNER’S MANUAL

Automatic Only

12. After selecting Automatic, press the

Setup button. The game will prompt

you to confirm the default Server IP,

Primary DNS and Secondary DNS in-

formation. Touch the NEXT button to

accept these defaults. The game will

then try to connect to the server. Touch

the YES button for the game to connect

and complete the registration process.

The game will connect to the server

(see Figure 4). Your first connection

may take up to 40 minutes.

13. To confirm that a proper connection took

place, touch the Connection Log but-

ton on the TournaCHAMP Menu Screen.

If there were no errors, you will see

“SUCCESSFUL” at the Connection Log

Screen (see Figure 5). If there is an

error message, check the troubleshoot-

ing guide and follow the corrective ac-

tion to fix the problem. Touch the X

button on the Connection Log Screen

to exit. Continue with Beginning

Tournament Play.

Manual Only

14. After selecting Manual, press the

Setup button. The game will then

prompt you to enter the Static IP Ad-

dress. Enter the Address given to you

by your service provider and touch the

NEXT button. Then, enter the Gate-

way given to you by your service pro-

vider and touch the NEXT button. The

Server IP, Primary DNS Address and

Secondary DNS Address will already

be filled out, simply touch NEXT to ac-

cept the default information. The game

will then try to connect to the server.

Touch the YES button for the game to

connect and complete the registration

process. The game will connect to the

server (see Figure 4). Your first con-

nection may take up to 40 minutes.

15. To confirm that a proper connection took

place, touch the Connection Log but-

ton on the TournaCHAMP Menu Screen.

If there were no errors, you will see

“SUCCESSFUL” at the Connection Log

Screen (see Figure 5). If there is an

error message, check the troubleshoot-

ing guide and follow the corrective ac-

tion to fix the problem. Touch the X

button on the Connection Log Screen

to exit. Continue with Beginning

Tournament Play.

31 MONEY SHOOT OWNER’S MANUAL PM0519-03

To Enter This screen, Touch the

“Connection Log” Button at the

TournaCHAMP Menu Screen

FIGURE 5 - CONNECTION LOG SCREEN

Connection Log

The numbers following the time and date of

the last connection attempt have the follow-

ing meanings:

M - manual update

1 - 1st attempt of an automatic update

2 - 2nd attempt of an automatic update

3 - 3rd attempt of an automatic update

If the status message is displayed in green it

was a successful connection. Status mes-

sages displayed in red are unsuccessful

connection attempts.

Manual Update

If the game fails to connect, a red X will
appear over the part of the process that
failed. Reference the Troubleshooting
Guide in this manual to correct the problem.

An X on the game:

• No modem detected

• Modem unavailable

• Machine serial number not valid

• No machine serial number

• Invalid security key

An X on the first arc:

• No dial tone

• ISP phone line is busy

• Modem lost phone connection

• ISP not answering

An X on the WWW:

• ISP not responding

• Unable to connect with ISP

• Connection to ISP interrupted

• Login information not accepted by ISP

• No information received. Disconnecting

• Unable to configure connection with ISP

• Server not responding to requests

• ISP not responding properly to requests

An X on the second arc:

• Unable to detect server

An X on the Merit House:

• Server not responding

• Server error

• Invalid information received

FIGURE 4 - MANUAL UPDATE SCREEN

To Enter This Screen, Touch the

“Update From Server” Button at the

TournaCHAMP Menu Screen

PM0519-03 MONEY SHOOT OWNER’S MANUAL

To Enter This Screen, Touch the

“ACCEPT” Button on the Disclaimer

Screen or Log In.

FIGURE 8 - TOURNACHAMP PLAYER

SCREEN

After player registration is com-

plete, confirm or make changes to

your information as needed.

FIGURE 7 - PLAYER INFORMATION

SCREEN

FIGURE 6 - AVAILABLE TOURNAMENT

MATCHES

To Enter This Screen, Touch the

“TournaCHAMP” Button on the

Player Menu Screen.

Beginning Tournament Play

16. Touch the TournaCHAMP button on

the Player Menu Screen to begin Tour-

nament play.

17. Select the Tournament game that you

want to play (see Figure 6). Select

Rankings on this screen to view the

current Tournament rankings.

20. Touch the ACCEPT button to begin play.

Touch the DECLINE button to delete ALL

entered information.

21. Once you log in, the TournaCHAMP

Player Screen will appear. From this

screen you can view your top scores

or enter the ranking screens to com-

pare your scores to other players. See

Figure 8.

18. To register a new player, touch the NEW

PLAYER button to begin registration.

At this screen enter all required infor-

mation. For registered players, simply

enter your name and PIN.

NOTE: Register on the game by enter-
ing required information (Name, Ad-
dress, Phone number, etc.). This infor-
mation is required to determine Tour-
nament winners. A player only needs
to register once, and can then partici-
pate in any Tournament available on
the Tournament system.

19. Once the required fields have been

entered, confirm that all the information

is correct. Touch the NEXT button to

view the Tournament disclaimer.

33 MONEY SHOOT OWNER’S MANUAL PM0519-03

To Enter This Screen, Touch the

“TournaCHAMP” Button on the

Player Menu Screen, Then Touch

“RANKINGS.”

To Enter This Screen, Touch the

Player’s Name on the RANKINGS

Screen.

Awarding Local Prizes

Players qualify for prizes by finishing with

one of the top 3 high scores for the tourna-

ment. National prizes are awarded by send-

ing a Winner’s Claim Form directly to U.K.

TournaCHAMP Central Administration. Op-

erators can chose to award local prizes the

same way as National prizes and be invoiced

for the amount paid, or award local prizes

from the cash box money. Follow the in-

structions below to award a local prize from

the cash box.

23. Touch the TournaCHAMP button on

the Player Menu Screen.

24. Touch the RANKINGS button on the

TournaCHAMP Main Menu Screen to

access the Rankings Screen. See Fig-

ure 9.

25. Touch the player’s name to whom the

prize will be awarded. See Figure 10.

26. When the PIN keypad is displayed, an

attendant must enter one of the four,

pre-programmed attendant PINs. See

Figure 11.

27. The player then enters their PIN to con-

firm the awarding of the prize.

28. The attendant must then touch the

PRIZE AWARDED button to register the

payout.

NOTE: TOUCHING EXIT, WITHOUT
TOUCHING PRIZE AWARDED, WILL
CAUSE THE PRIZE AWARD SEQUENCE
TO BE ABORTED. THE SEQUENCE
WILL HAVE TO BE REPEATED TO

AWARD THE PRIZE.

Pay Without PIN

If players forget their PIN number, please

contact TournaCHAMP Central Administra-

tion at 020 8594 1234 for instructions.

FIGURE 11 - ATTENDANT PIN SCREEN

FIGURE 10 - RANKING SCREEN

FIGURE 9 - TOURNACHAMP MAIN

MENU SCREEN

PM0519-03 MONEY SHOOT OWNER’S MANUAL

TournaCHAMP Service

To Enter This Screen, Touch the

“SETUP” Button

FIGURE 12- MAIN MENU SCREEN

To Enter This Screen, Touch the

“System” Button at the MAIN MENU

SCREEN

FIGURE 14 - PLAYER MENU SCREEN

Tip #1: Use the 6 Star PIN to cut down ser-

vice calls. Set up your TournaCHAMP games

to use the 6 Star PIN so locations can do an

Update From Server. If you notice from your

operator interface connection report that a

machine has not connected recently, simply

call the location and have them perform an

Update From Server.

To enable 6 Star:

Press the SETUP button (located on
the monitor control board).

Touch the System button on the Main
Menu. See Figure 1.

Touch the Options button on the Sys-
tem Menu. See Figure 2.

Touch the box next to Enable 6 Star to
make the check appear in the box.
Touch the box next to A c c e s s
TournaCHAMP Update from 6 Star
to make the check appear in the box.

Touch the < button once to return to the
System Menu.

Touch the Set 6 Star PIN button.

Enter a 1-6 digit PIN number.

Touch X and touch YES to return to the
Main Game Menu Screen.

The operator can now access the 6 Star
functions by following these steps:

Touch the OPTIONS button on the Main
Game Menu Screen (see Figure 3).

10. Touch the 6 Star button.

11. Enter the 6 Star PIN.

Tip #2: Turn the game off and on once in a

while, especially if the location keeps the

game on 24 hours a day. This will force the

modem to do a manual reinitialization and

help ensure smooth connections. This can

easily be done with a phone call to the loca-

tion.

FIGURE 13 - SYSTEM MENU SCREEN

35 MONEY SHOOT OWNER’S MANUAL PM0519-03

To Enter This Screen, Touch the “X”

Button to Exit the SETUP Screens

TOURNACHAMP TROUBLESHOOTING GUIDE

Dial-Up Connection Status Messages

Message

Corrective Action

BAD SERVER
ADDRESS

• The server IP address was entered incorrectly.
• Verify proper entry of server IP address

CONNECTION TO

ISP INTERRUPTED

• The connection to the ISP was broken.

• Try again.

ERROR DIALING

MODEM

• An error occurred while dialing.

• Verify proper modem installation and try again.

EXPIRED

VERSION OF

COMMUNICATION

SOFTWARE

• The server can’t communicate with the machine.

• Contact an authorized distributor for an upgrade.

INVALID

INFORMATION

RECEIVED FROM

TOURNACHAMP

SERVER

• Invalid information was received from the server.

• Please contact the server manager with connection details.

INVALID

SECURITY KEY

DETECTED

• The security key installed in the machine does not match with
previous connections to the server.

• Contact the manager for more details.

ISP NOT

ANSWERING CALL

• The call was not answered.

• Make sure the ISP telephone number was entered correctly
and try again.

ISP NOT

RESPONDING

• The call was answered, but not by a detectable modem.

• Make sure the ISP telephone number was entered correctly.

ISP NOT

RESPONDING

PROPERLY TO

REQUESTS

• Automatic configuration requests to the ISP were not answered
properly or slowly.

• Try again.

ISP PHONE LINE IS

BUSY

• The modem detected a busy signal connecting to the ISP.

• Try again later.

UNABLE TO

ESTABLISH

CONNECTION

WITH ISP

•  The call was answered by a modem but requests for
  connection were not answered.
•  Try again. If a connection is not made after multiple attempts,
  the selected ISP may not conform to Internet standards.

PM0519-03 MONEY SHOOT OWNER’S MANUAL

TROUBLESHOOTING GUIDE Continued

Message

Corrective Action

SECURITY KEY
VIOLATION

• The security key installed in the machine does not match with
previous connections to the server.

• Contact TournaCHAMP Central for more details.

SERVER ERROR
REPORTED

• An unexpected error occurred on the server.

• Please contact TournaCHAMP Central with connection details.

UNABLE TO
DETECT
TOURNACHAMP
SERVER/SERVER
NOT RESPONDING

•  The computer at the server IP address entered in the Dial-Up
  Network Screen is not responding.
•  Verify correct server IP entry.

• The ISP rejected either the user name or password.

• Verify that the user name and password were entered correctly

and the account is active.

MACHINE SERIAL
NUMBER NOT
VALID/NOT FOUND

•  The serial number entered on the machine is not valid to
  participate in a Tournament.
•  Verify the serial number entered matches the serial number on
  the side of the machine and then contact the server manager for
  proper registration information.

  MODEM LOST
  PHONE
  CONNECTION

• The connection to the ISP was interrupted. Verify telephone
connection is of good quality.

• Try again.

NO ANSWER

• The call was not answered.
• Make sure the ISP telephone number was entered correctly.

NO DIAL TONE

• The modem did not detect a dial tone on the line.

• Make sure the telephone cable is properly connected.

• If your telephone system does not support dial tones, select
NO in the WAIT FOR TONE section of the Dial-In Setup Screen.

  NO MODEM
  DETECTED,
  CHECK MODEM
  INSTALLATION

• Could not detect proper installation of modem.

• Make sure modem is installed and CMOS settings are correct.

37 MONEY SHOOT OWNER’S MANUAL PM0519-03

Merit Video Machine Limited Warranty

Merit Industries, Inc. warrants its video ma-

chines to be free from defects in material

and workmanship for a period of one year

from the date of purchase. The warranty

covers all electrical components (except

fuses and light bulbs) and printed circuit

boards. The touchscreen is under war-

ranty for a period of 3 years.

Failure due to misuse, vandalism, exces-

sive or intentional abuse, operation outside

specified conditions (including, but not lim-

ited to, improper electrical power source),

fire, water damage, acts of God, acts of

war and civil unrest are specifically ex-

cluded.

Merit products are carefully inspected and

thoroughly tested prior to packing and ship-

ment. Any damage discovered upon re-

ceipt of goods, whether obvious or con-

cealed, must be reported immediately to the

delivering carrier and claims made directly

to them. Merit assumes no responsibility

for damages once the product has left its

facilities and any disputes regarding trans-

portation damage must be resolved with the

shipping company(s).

Merit will repair or replace, at its option, any

component, part or assembly that fails un-

der warranty, provided that the failed item

is returned, shipping charges prepaid, to

Merit’s repair facility and Merit is notified of

the failure within the warranty period. Merit

reserves the right to request the serial num-

bers of the item and/or game which has

failed, and copies of sales invoices, bills of

lading or other documents as required to

determine the validity of the warranty cov-

erage. Merit will return or replace warranty

items, as specified above, shipping charges

prepaid, by ground transportation.

Merit’s obligation shall be limited to repair or

replacement as stated above, and shall spe-

cifically exclude any liability for consequen-

tial damages or loss of earnings.

Merit may, at its discretion, provide replace-

ment parts under warranty prior to receiv-

ing defective items, without incurring any

ongoing obligation to extend such accom-

modations.

In certain instances, due to geographical or

other considerations, Merit may offer PCB

warranty service on an extended time ba-

sis as follows:

(a) User notifies Merit in writing (or FAX)

of PCB failure, providing dates of failure,

serial numbers and a brief description of

failure symptoms.

(b) Failed PCBs are accumulated for a

time period or quantity accumulation, as

designated by Merit and sent in one ship-

ment to save shipping expenses.

of failure notification.

The above terms and conditions constitute

the sole obligation, written or implied, of Merit

Industries under its warranty coverage.

PM0519-03 MONEY SHOOT OWNER’S MANUAL

Merit Industries, Inc. Software License Agreement

Merit Industries, Inc. (“Licensor”) is willing to license the enclosed software to you only if
you accept all of the terms in this license agreement (“Agreement”).

Ownership of the Software

The enclosed Merit® product, which may include but is not limited to the Megatouch®
software program (“Software”) and the accompanying written materials are owned
by Licensor and are protected by United States copyright laws, patent laws and
other intellectual property laws, by laws of other nations, and by international treaties.

Restrictions on Use and Transfer

If this Software package contains multiple media types (such as CD’s, flash cards,
hard drives, etc), then you may use only the type of media appropriate for your
Machine. You may not use the other media types on another Machine, or transfer, or
assign them to another user except as part of the permanent transfer of the Software
and all written materials (as provided for below in paragraph 4).

You may make one copy of the software for backup purposes only. You may not
copy or make backup copies of any software security key or software security
device under any circumstances.

You may permanently transfer the right to use the Software and accompanying
written materials (including the most recent update and all prior versions) if you retain
no copies and the transferee agrees in writing to be bound by the terms of this
Agreement. Such a transfer of this license to another party immediately terminates
your license. You may not otherwise transfer or assign the right to use the Software,
except as stated in this paragraph.

You may not operate or allow the operation of the Software at locations where the
operation of such Software does not comply with all local, state, and other
governmental body laws and regulations. You agree to not use or permit the use of
the Software in violation of any U.S. Federal, state, or local laws or regulations or
any foreign law or regulation, including laws regarding gaming, gambling or intellectual
property rights in or concerning the Software.

You may not modify, adapt, translate, reverse engineer, decompile, disassemble the
Software or create derivative works from the Software or any component thereof;
nor may you remove, modify or hide or otherwise make unreadable or non-viewable
any notice, legend, advice, watermark or other designation contained on the Software,
component thereof, or output therefrom.

You agree that the Software and the authorship, systems, ideas, inventions methods
of operation, documentation and other information contained therein, and all versions,
modifications and adaptations thereto are proprietary intellectual properties of Licensor
and are protected by civil and criminal law, and by copyright, trade secret, trademark
and the patent laws of the United States and other countries.

Limited Warranty

Licensor warrants, solely for your benefit, that the Software will function in material
conformity, with its accompanying documentation for a period outlined in Licensor’s
standard product warranty period after your receipt of the Software.

Licensor’s Obligations Under Warranty

Licensor’s sole obligation under the aforesaid warranty shall be to utilize commercially
reasonable efforts to correct or modify such portion of the Software as to make it
materially conform with the applicable documentation.

39 MONEY SHOOT OWNER’S MANUAL PM0519-03

Grant Of License

10. Licensor grants to you a limited, non-exclusive license to distribute and/or use one

copy of the Software on a single Merit (“Machine”) accompanied by a single licensor
factory authorized security key. Licensor reserves the right to update versions of the
software and the content to the Machine as deemed appropriate by the Licensor.
You are entrusted to maintain and protect your single licensor factory authorized
security key, password, or other identification from being utilized by any third party,
and you agree to be responsible for any use of the Software provided herein by a
third party utilizing your identification. Licensor maintains the right to immediately
terminate your License for reasons related to misuse or other non-conformity with
the rules expressed herein. While Licensor does not routinely inspect Machines,
Licensor also reserves the right to inspect or audit the Software from time to time in
Licensor’s sole discretion. To the extent that Licensor’s access to the Software
requires that Licensor also gain access to a Machine in which the Software is
installed, you agree to promptly provide Licensor, when requested, with permission
and aid in Licensor gaining access to the Machine.

Disclaimers

11. EXCEPT AS PROVIDED IN THE SECTION ENTITLED “LIMITED WARRANTY”, LICENSOR

MAKES NO OTHER PROMISES, REPRESENTATIONS OR WARRANTIES, WHETHER
EXPRESSED OR IMPLIED, REGARDING OR RELATING TO THE SOFTWARE OR
CONTENT THEREIN OR TO ANY OTHER MATERIAL FURNISHED OR PROVIDED TO
YOU PURSUANT TO THIS AGREEMENT OR OTHERWISE AND LICENSOR SPECIFICALLY
DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE WITH RESPECT TO SAID MATERIALS OR THE USE THEREOF.
TO THE MAXIMUM EXTENT ALLOWABLE BY LAW THE UNIFORM COMMERCIAL CODE
OR OTHER UNIFORM LAWS SHALL NOT APPLY TO THIS AGREEMENT.

Limitation on Liability

12. IN NO EVENT SHALL LICENSOR BE LIABLE UNDER ANY CLAIM, DEMAND OR ACTION

ARISING OUT OF OR RELATING TO THE SOFTWARE, ITS USE, INSTALLATION OR
LICENSOR’S PERFORMANCE OR LACK THEREOF UNDER THIS AGREEMENT FOR
ANY SPECIAL, INDIRECT, INCIDENTAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES,
WHETHER OR NOT LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
CLAIM, DEMAND OR ACTION. IN ADDITION, WITHOUT LIMITING THE FOREGOING, IN
ALL EVENTS THE REMEDIES AVAILABLE TO YOU SHALL BE LIMITED TO THE AMOUNT
PAID BY YOU TO LICENSOR FOR THE SOFTWARE.

13. IN NO EVENT WILL LICENSOR BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY

LOSS OF PROFITS, LOST SAVINGS, OR OTHER INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF YOUR USE, MISUSE, BREACH OF THIS AGREEMENT OR
INABILITY TO USE THE SOFTWARE.

General

14. The validity and construction of this Agreement and of the rights and obligations herein

shall be determined and governed by the laws of the State of New York. By accepting
the terms of this Agreement, you acknowledge and accept that the courts of New
York, New York shall have exclusive jurisdiction and venue regarding any disputes
arising with regard to this Agreement or arising out of activity or misuse of the
Software.

15. Merit, in its sole discretion, may assign this agreement or any of its rights and

obligations hereunder.

16. If you have any questions concerning this Agreement or wish to contact Licensor for

any reason, please write: Merit Industries, Inc., 2525 State Road, Bensalem, PA
19020, USA.

PM0519-03 MONEY SHOOT OWNER’S MANUAL

Contrat de licence de logiciel de Merit Industries, Inc.

Merit Industries, Inc. (ci-après le "Concédant") est disposé à vous accorder la licence d'utilisation
du logiciel ci-inclus, à condition que vous vous engagiez à respecter tous les termes, clauses et
conditions du présent contrat de licence (Contrat).

Droit de Propriété
1.

Le produit Merit ci-joint contenant, mais ne s'y limitant pas, le logiciel Megatouch™ (ci-après le
"logiciel") et toute la documentation écrite, restent la propriété du Concédant et sont protégés
par : les lois de droits d'auteur des Etats-Unis, les lois s'appliquant aux brevets déposés et à
la propriété intellectuelle, ainsi que par celles des autres pays et les traités internationaux.

Restriction d'Utilisation et Transfert
2.

Si le présent logiciel comprend plusieurs types de composants (tels que CD-ROM, cartes
flash, disques durs, etc), vous ne pouvez utilisez que ceux qui conviennent à votre appareil.
Il est strictement interdit de les utiliser sur un autre appareil, les transférer -ou les céder à un
autre utilisateur, sauf en cas de transfert permanent du logiciel et de toute la documentation
écrite (comme indiqué ci-dessous au paragraphe 4).

Il est interdit de copier le logiciel, à l'exception d'une copie de sauvegarde. Il est aussi interdit
de reproduire -ou faire des copies de sauvegarde des programmes de clé de sécurité ou
autres fichiers de sécurité, quelles que soient les circonstances.

Vous pouvez céder en permanence à un tiers -le droit d'utiliser le LOGICIEL et toute la
documentation écrite l'accompagnant, (ainsi que la plus récente mise à jour et toutes autres
anciennes versions) seulement si vous n'en gardez aucune copie, et si le cessionnaire
s'engage, par écrit, à respecter les termes, clauses et conditions du présent Contrat. Cette
cession à un tiers met fin à votre licence immédiatement. Autrement, vous n'avez pas la
permission de transférer ou d'accorder à un tiers le droit d'utiliser le présent logiciel, excepté
que tel que décrit dans le présent paragraphe.

Il est interdit d'utiliser le présent logiciel ou de permettre son utilisation dans des emplacements
où l'utilisation du présent logiciel n'est pas conforme aux lois et réglementations locales,
nationales ou réglementations d'autres organismes gouvernementaux. Vous acceptez de ne
pas utiliser ou d'autoriser l'utilisation du logiciel d'une manière enfreignant les lois ou regula-
tions s'appliquant à la propriété intellectuelle et au jeu, en vigueur aux Etats-Unis ou dans les
autres pays du monde, y compris les lois de l'ensemble du logiciel.

Il est interdit de modifier, adapter, traduire, démonter, décompiler, désassembler le logiciel ou
créer du matériel dérivé du logiciel ou de tout composant de celui-ci ; vous ne pouvez pas
enlever, modifier ou cacher ou rendre illisible ou non-visible toute instruction, légende, infor-
mation ou filigrane ou autre désignation qui apparaît dans le logiciel, composant dudit logiciel
ou résultant dudit logiciel.

Vous convenez que le logiciel et les droits d'auteur, les systèmes, les idées, les inventions, les
méthodes d'utilisation, la documentation et autre information incluse, ainsi que toutes les
versions, modifications et adaptations qui s'y rattachent sont les propriétés intellectuelles du
Concédant et sont protégées par le droit civil et pénal et par le droit d'auteur, le secret
commercial, la marque déposée et le brevet aux Etats-Unis et dans les autres pays du monde.

Limite de Garantie
8.

Le Concédant garantit seulement à votre intention, que le logiciel permettra une utilisation
conforme, avec la documentation l'accompagnant, pendant la période de temps indiquée
dans la période de garantie du produit standard du Concédant, à compter de la date de
livraison du logiciel.

Responsabilité du Concédant aux termes de la Garantie
9.

La seule obligation du Concédant aux termes de la garantie susmentionnée sera de faire tous
les efforts commercialement raisonnables pour corriger ou modifier la partie du logiciel pour
le rendre matériellement conforme aux spécifications de la documentation.

41 MONEY SHOOT OWNER’S MANUAL PM0519-03

Concession de Licence
10. Le Concédant vous accorde le droit d'utiliser une seule copie par appareil Merit (ci-après

"Appareil") accompagné d'une seule clé de sécurité autorisée en usine et fournie par le
Concédant. Le Concédant se réserve le droit de mise à jour des versions du logiciel et du
contenu de l'Appareil, quand il juge nécessaire de le faire. Il vous appartient également
d'empêcher que les mots de passe ou autres codes et la clé de sécurité soient utilisés par un
tiers. Vous acceptez d'assumer la responsabilité dans le cas de l'utilisation du logiciel par un
tiers. Le Concédant se réserve le droit de résilier votre contrat de licence à tout moment dans
l'éventualité d'une utilisation non-conforme aux clauses stipulées. Bien que le Concédant ne
contrôle pas les appareils périodiquement, il se réserve toutefois le droit de contrôler le logiciel
à tout moment et sans préavis de sa part. De surcroît, dans l'éventualité où le logiciel n'est
accessible qu'à travers la machine dans laquelle il est installé, le licencié s'engage à donner
libre accès au Concédant, ou ses représentants, à la machine et dans les plus brefs délais.

Exclusion de toute autre garantie
11. EXCEPTE COMME PREVU DANS LA SECTION INTITULEE "LIMITE DE GARANTIE", LE CONCEDANT

N'ASSURE AUCUNE AUTRE GARANTIE DE QUELQUE NATURE ET A QUELQUE TITRE QUE CE
SOIT, EXPLICITE OU IMPLICITE, EN RAPPORT AVEC LE LOGICIEL ET LES COMPOSANTS QUI
L'ACCOMPAGNENT OU, LE CAS ECHEANT, TOUT SUPPORT OU MATERIEL FOURNI
CONFORMEMENT AU PRESENT CONTRATEN PARTICULIER, LE CONCEDANT NE PEUT
DONNER AUCUNE GARANTIE, DE QUELQUE NATURE QUE CE SOIT, POUR LA
COMMERCIALISATION DE TOUS LES PRODUITS EN RAPPORT AVEC LE LOGICIEL OU AVEC
L'UTILISATION DE CELUI-CI. DANS LA MESURE OU CELA EST PERMIS PAR LA LOI, LE CODE
UNIFORME COMMERCIAL OU AUTRE LOI UNIFORME NE S'APPLIQUE PAS AU PRESENT
CONTRAT.

Limite de Responsabilité
12. LE CONCEDANT NE SERA EN AUCUN CAS RESPONSABLE DE TOUTE RECLAMATION,

DEMANDE OU ACTION RESULTANT DE OU EN RAPPORT AVEC LE LOGICIEL, SON UTILISATION
OU SON INSTALLATION, OU LA PERFORMANCE OU MANQUE DE PERFORMANCE DU
CONCEDANT EN VERTU DU PRESENT CONTRAT POUR TOUS DOMMAGES D'UNE NATURE
QUI N'EST PAS PRESUMEE PAR LA LOI ET QUI DOIVENT ETRE EXPRESSEMENT PROUVES,
DOMMAGE INDIRECTS, DOMMAGES-INTERETS POUR PREJUDICE MORAL, QUE LE
CONCEDANT AIT ETE AVISE OU NON DE LA POSSIBILITE D'UNE TELLE RECLAMATION,
DEMANDE OU ACTION. DE PLUS, SANS LIMITER CE QUI PRECEDE, LES DEDOMMAGEMENTS
A VOTRE DISPOSITION SERONT LIMITES AU MONTANT QUE VOUS AUREZ PAYE AU
CONCEDANT POUR LE LOGICIEL.

13. LE CONCEDANT NE SERA EN AUCUN CAS RESPONSIBLE : D'UNE RUPTURE DE CONTRAT,

DES DOMMAGES, Y COMPRIS TOUTE PERTE DE PROFIT, PERTES D'ECONOMIE OU TOUS
AUTRES DOMMAGES INDIRECTS OU DOMMAGES-INTERETS ACCESSOIRES DECOULANT
DE LA MAUVAISE UTILISATION OU DE L'IMPOSSIBILITE D'UTILISATION DU LOGICIEL.

Dispositions Générales
14. La validité et la construction du présent Contrat et les droits et obligations ci-inclus seront

déterminés et régis par les lois de l'état de New York aux États-Unis. En acceptant les
dispositions du présent contrat, vous acceptez également que tous litiges ou revendications
relatives seront réglés par voie d'arbitrage par un tribunal de l'état de New York, aux Etats-
Unis.

15. Merit Industries se réserve le droit de transférer le présent Contrat à un tiers ainsi que ses

droits et obligations ci-après.

16. Pour toutes questions concernant le présent Contrat -ou si vous désirez contacter le Concédant

pour une raison quelconque, veuillez écrire à : Merit Industries, Inc., 2525 State Road, Bensalem,
PA 19020, Etats-Unis.

PM0519-03 MONEY SHOOT OWNER’S MANUAL

Merit Industries, Inc. Softwarelizenzabkommen

Merit Industries, Inc. („Lizenzgeber”) ist nur dann bereit Ihnen eine Lizenz für die beiliegende
Software zu erteilen, wenn Sie alle Bestimmungen dieses Lizenzabkommens (“Abkommen”)
akzeptieren.

Eigentumsvorbehalt der Software
1.

Das beiliegende Merit®-Produkt, welches das Megatouch® Softwareprogramm („Soft-
ware”) beinhalten kann, aber nicht darauf beschränkt ist, und die schriftlichen Unterlagen
sind Eigentum des Lizenzgebers und sind durch die Gesetze der Vereinigten Staaten
und anderer Länder und durch internationale Verträge urheberrechtlich geschützt.

Beschränkungen im Gebrauch und Transfer
2.

Sollte diese Softwarelieferung mehrere Medien enthalten (z.B. CD, Karten, Festplatten
usw.), dürfen Sie nur die für Ihre Maschine angebrachte Medienart verwenden. Die anderen
Medienarten dürfen nicht auf anderen Maschinen verwendet werden oder an Dritte
übergeben werden, abgesehen von einem endgültigen Transfer der Software und aller
schriftlichen Unterlagen (wie im untenstehenden Paragraphen 4 beschrieben).

Sie dürfen nur eine Sicherungskopie der Software herstellen. Unter keinen Umständen
dürfen Sie einen Softwaresicherungsschlüssel oder Sicherungsmaßnahmen kopieren oder
davon Sicherungskopien herstellen.

Sie dürfen das Nutzungsrecht für die Software und die schriftlichen Unterlagen (einschließlich
der aktuellen Version und aller vorhergehenden Versionen) an Dritte übertragen, wenn Sie
keine Kopie behalten und wenn der Empfänger die Bestimmungen dieses Abkommens in
schriftlicher Form akzeptiert. Bei einem solchen Transfer der Lizenz an Dritte erlischt Ihre
Lizenz umgehend. Abgesehen von den Bestimmungen dieses Paragraphen sind alle anderen
Transfers oder Übertragungen der Nutzungsrechte für diese Software unerlaubt.

Sie dürfen die Software nicht benutzen oder eine Nutzung gestatten, wenn eine
solche Nutzung der Software irgendwelche Gesetze und Verordnungen der
kommunalen oder staatlichen Behörden verletzen würde. Sie verpflichten sich die
Software nicht so zu nutzen oder nutzen zu lassen, dass sie damit gegen staatliche,
Bundes- oder Lokalgesetze oder Bestimmungen der USA oder gegen ausländische
Gesetze oder Bestimmungen, einschliesslich aller Gesetze bezüglich Glücksspiels,
Spielens oder geistigen Eigentumrechts der Software, verstossen.

Es ist Ihnen nicht gestattet, die Software abzuändern, zu verändern, zu übersetzen,
rückumzuwandeln, zu dekompilieren oder zu zerlegen, oder aus der Software oder eines
Teils davon andere Werke abzuleiten. Sie dürfen auch aus der Software, einem Bestandteil
der Software oder aus den Datenausgaben der Software keine Hinweise, Bemerkungen,
Ratschläge, Wasserzeichen oder andere Markierungen entfernen, verändern, verbergen
oder auf andere Art unlesbar machen.

Sie akzeptieren, dass die Software und die Urheberschaft, die Systeme, die Ideen,
Erfindungen, die Arbeitsweisen, die Dokumentation und alle anderen darin enthaltenen
Informationen und alle Versionen, Veränderungen, und Bearbeitungen davon das geistige
Eigentum des Lizenzgebers sind, und dass sie durch Straf- und Zivilgesetzgebung und
durch die Copyright-, Geschäftsgeheimnis-, Warenzeichen- und die Patentgesetze der
Vereinigten Staaten und anderer Länder geschützt sind.

Beschränkte Garantie
8.

Der Lizenzgeber garantiert zu Ihren Gunsten, dass die Software für die angegebene
normale Garantiezeit des Lizenzgebers nach Ihrer Annahme der Software in erheblicher
Übereinstimmung mit der beiliegenden Dokumentation laufen wird.

Verpflichtung des Lizenzgebers im Rahmen der Garantie
9.

Die ausschließliche Pflicht des Lizenzgebers im Rahmen der vorstehenden Garantie besteht
darin, alle geschäftlich vertretbaren Schritte zu unternehmen, um Teile der Software zu
berichtigen oder abzuändern, bis sie mit der beiliegenden Dokumentation erheblich
übereinstimmen.

43 MONEY SHOOT OWNER’S MANUAL PM0519-03

Übertragung der Lizenz
10. Der Lizenzgeber gewährt Ihnen eine beschränkte, nicht-ausschliessbare Lizenz zur

Vertreibung und/oder Benutzung einer Kopie der Software auf einem einzelnen Merit™ („Gerät”)
mit einem einzelnen werksmäßig gestatteten Sicherungsschlüssel. Der Lizenzgeber behält
sich das Recht vor, nach eigenem Ermessen die Software und den Inhalt der Maschine zu
verbessern. Sie sind dafür verantwortlich ihren individuellen, vom Lizenzgeber werksmäßig
gestatteten Sicherheitsschlüssel, ihr Passwort oder anderweitigen Identifikationsmechanismus
instandzuhalten und abzusichern gegen die Nutzung durch eine dritte Partei, und sie akzeptieren
die Verantwortung für jegliche Nutzung der besagten Software durch eine dritte Partei mithilfe
ihresIdentifikationsmechanismus . Obwohl der Lizenzgeber nicht regelmässig Maschinen
inspiziert, behält sich der Lizenzgeber das Recht vor, ihre Lizenz umgehend zu kündigen aus
Gründen des Missbrauchs oder bei Nichtbefolgung der Bestimmungen in diesem Vertrag. Der
Lizenzgeber behält sich ebenfalls das Recht vor, die Software von Zeit zu Zeit nach eigenem
Ermessen zu inspizieren oder zu überprüfen. Im Falle, dass der Lizenzgeber Zugang zu dem
Gerät wünscht, in dem besagte Software installiert ist, erklären Sie sich bereit, dass sie dem
Lizenzgeber, wenn nötig, Erlaubnis und Hilfe beim Zugang zum Gerät verschaffen.

Beschränkungen
11.

ABGESEHEN VON DEN BESTIMMUNGEN DES PARAGRAPHEN „BESCHRÄNKTE GARANTIE"
GIBT DER LIZENZGEBER KEINE SONSTIGEN VERSPRECHEN, VERPFLICHTUNGEN ODER
GARANTIEN, OB AUSDRÜCKLICH ODER STILLSCHWEIGEND, FÜR DIE SOFTWARE ODER
IHRE BESTANDTEILE ODER FÜR ALLE ANDEREN MATERIALIEN, DIE IHNEN IM RAHMEN DIESES
ABKOMMENS ZUR VERFÜGUNG GESTELLT ODER ÜBERLASSEN WERDEN, UND DER
LIZENZGEBER LEHNT AUSDRÜCKLICH ALLE ANSPRÜCHE AUF MARKTFÄHIGKEIT UND
EIGNUNG DER BESAGTEN MATERIALIEN FÜR DEN GEWÖHNLICHEN GEBRAUCH AB. SOWEIT
GESETZESMÄSSIG ZUGELASSEN, SOLLEN DIE HANDELSRECHTLICHE GESETZGEBUNG
AUS DEM UNIFORM COMMERCIAL CODE ODER ANDERE GESETZE AUF DIESES ABKOMMEN
NICHT ANWENDBAR SEIN.

Haftungsbeschränkung
12. DER LIZENZGEBER HAT KEINERLEI HAFTUNG BEI EINEM ANSPRUCH, EINER FORDERUNG

ODER EINER KLAGE, DIE AUF NUTZUNG DER SOFTWARE, DEREN INSTALLIERUNG, DER
LEISTUNG DES LIZENZGEBERS ODER DESSEN VERSAGEN IM RAHMEN DIESES ABKOMMENS
FÜR JEGLICHE FOLGE-, INDIREKTE, SONDER- ODER NEBENSCHÄDEN BERUHEN, SELBST
WENN DER LIZENZGEBER AUF DIE MÖGLICHKEIT EINES SOLCHEN ANSPRUCHES, EINER
FORDERUNG ODER EINER KLAGE HINGEWIESEN WURDE. WEITERHIN UND OHNE
BESCHRÄNKUNG DES LETZTEN SATZES, DÜRFEN IN ALLEN FÄLLEN DIE IHNEN ZUR
VERFÜGUNG STEHENDEN ABHILFEN DIE VON IHNEN FÜR DIE SOFTWARE AN DEN
LIZENZGEBER GEZAHLTE SUMME NICHT ÜBERSCHREITEN.

13. DER LIZENZGEBER HAT IN KEINEM FALL EINE HAFTUNG IHNEN GEGENÜBER FÜR SCHÄDEN,

EINSCHLIESSLICH ETWAIGER GEWINNVERLUSTE, NICHT REALISIERTER EINSPARUNGEN
ODER ANDERER NEBEN- ODER FOLGESCHÄDEN, DIE AUS IHRER VERWENDUNG,
MISSBRAUCH, VERLETZUNG DIESES ABKOMMENS ODER GEBRAUCHSUNFÄHIGKEIT DER
SOFTWARE ENTSTEHEN.

Allgemein
14. Die Rechtsgültigkeit und Provisionen dieses Abkommens und der darin enthaltenen Rechte und

Pflichten werden durch die Gesetze des Staates von New York bestimmt. Sollten sie diese
Vereinbarungen annehmen, dann akzeptieren Sie, dass der ausschliessliche Erfüllungsort
und Gerichtsstand bei den Gerichten von New York im Staat New York liegen hinsichtlich aller
Streitigkeiten, die diesen Vertrag betreffen, oder die durch Leistung oder Missbrauch der
besagten Software entstehen.

15. Merit kann nach eigenem Ermessen dieses Abkommen oder jedes der darin enthaltenen

Rechte und Pflichten an Dritte abtreten.

16. Bei Rückfragen über dieses Abkommen oder wenn Sie den Lizenzgeber aus einem anderen

Grund kontaktieren wollen, bitte schreiben an: Merit Industries, Inc., 2525 State Road, Bensalem,
PA 19020, USA.

PM0519-03 MONEY SHOOT OWNER’S MANUAL

NOTES:

__________________________________________________________________

_______________________________________________________________

________________________________________________________________

___________________________________________________________________

_______________________________________________________________

________________________________________________________________

__________________________________________________________________

_________________________________________________________________

______________________________________________________________

________________________________________________________________

___________________________________________________________________

__________________________________________________________________

_________________________________________________________________

_____________________________________________________________________