Megatouch Maxx Technical Service Manual — Megatouch Support & Repair

Technical service manual (90003010 Rev C) for the Megatouch Maxx covering cabinet information, hard drives, troubleshooting, and power supplies.

Merit Industries, Inc.
2525 State Rd.
Bensalem, PA 19020-8529
(215) 639-4700; (800) 523-2760
http://www.meritind.com

90003010 Rev C

Section 1 - Cabinet Information

General Information- All Cabinet Styles

Dimensions/Shipping Weights

General Information - Countertop

Parts Illustrations

General Information - Upright

Parts Illustrations

MAXX Parts List

Section 2 - Hard Drive Information

Hard Drive Numbers

Program Numbers
Part Numbers
Security Key Numbers

Section 3 - Troubleshooting Information

Touchscreens

Troubleshooting
Touchscreen Calibration

Motherboard Handling Precautions
Motherboard Diagrams
Access/Removal of Major Assemblies

Motherboard
Monitor
Hard drive
Touchscreen

Troubleshooting Guide
CMOS Setup
Mars 2000 Bill Acceptor

DIP Switch Settings

Section 4 - Power Supplies

Power Supplies Used in MAXX Games

GlobTek ST-230WHF
EOS VTL100-4000
Mini-GlobTek AT145-S/GPS145-MATX
Enhance SFX-1211J

Section 5 - Motherboards

Circuit Board Cross Reference Chart

Telco
Mitsubishi
Itox
Unicorn

I/O Board Pinouts (Blue)

Section 6 - Monitors

Monitors Used in MAXX Games

Tatung--type 38
Tatung--type 58
Tatung--type 66
Tatung VS-20475TZ21
Tatung VT19726Z

Wells-Gardner--type 41
Wells-Gardner--type 67
Tatung/Wells--type 40
Kortek flatscreen

Monitor Adjustments

Degaussing
Monitor Adjustment Procedures

Section 7 - Technical Service Bulletins

TN 27

(Missing spacer for hard drive shock mount
in upright games)

TN 28

(Small coins falling into coin return slot inside
countertop coinbox)

TN 29

(Internal power cord in countertop games)

TN 30

(Cleaning games)

TN 31

(Coinbox Adjustment on Megatouch Slim
MAXX Countertop Games)

TN 32

(MAXX 2K CD upgrade)

TN 33

(Adjustment to Slim MAXX coin chute)

TN 36

(Theft deterrent)

CSBULL26

(Potential electrical short circuit on EZ MAXX
games)

FLDBLL 18

(Idle mode)

TN 41

(CD updates)

FLDBLL 19

(Removing and installing the coin box in
MAXX Select/Slim MAXX games)

FLDBLL 20

(Tri-Towers and 11-UP in games with
version 6.02 software)

TN 42

(Baseball in MAXX Owner’s Manuals)

TN 43

(Using a keyboard in upgrading MAXX
games)

TN 44

(Security key return procedure)

FLDBLL 21

(Fan shield on rear door of MAXX Classic
games)

Megatouch MAXX Technical Service Manual Contents

Megatouch MAXX Technical Service Manual Contents (cont’d)

TN 46

(Linking MAXX games)

TN 47

(Double Diamond name change)

TN 48

(Motherboard identification)

TN 49

(Telco motherboards and TournaMAXX
operation)

FLDBLL 22

(Thumbscrew on Elite MAXX games with
integrated bill acceptor)

FLDBLL 23

(Manufacturer defect in security keys)

TN 54

(Replacing touchscreen controllers on EZ
MAXX and MAXX Elite games)

FLDBLL 26

(Software bug affecting high scores)

FLDBLL 27

(Bill acceptor failures in New Jersey games)

FLDBLL 28

(Rebooting and locking up problems--for
games upgraded with XL to MAXX and Infinity
to MAXX kits only)

TN57

(New Jersey games and coin mech and bill
acceptor operation)

TN61

(Memory upgrade included in Ruby upgrade
Kits)

FLDBLL 29

(Canadian FORCE 2003 and Ruby security
keys)

TN58

(Software updates and championship tourna-
ments)

TN76

(FORCE 2004 Point 5/Sapphire 2 update
disc)

TN65 Rev D

(DIP switch settings in FORCE and MAXX
games)

Section 1

Cabinet Information

General Information- All Cabinet Styles

Dimensions/Shipping Weights

General Information - Countertop

Parts Illustrations

General Information - Upright

Parts Illustrations

MAXX Parts List

Cabinet Information Section

General Information

The Megatouch MAXX video games were available in several different cabinet styles:

Megatouch Full MAXX

Dimensions: H - 15-1/4”; W - 20”; D - 18-1/4”
Shipping dimensions: H - 26-1/2"; W - 23"; D - 21-1/4"
Shipping Weight: 95 lbs.

Megatouch Blue MAXX - MAXX Classic

Dimensions: H - 15-1/4”; W - 20”; D - 18-1/4”
Shipping dimensions: H - 26-1/2"; W - 23"; D - 21-1/4"
Shipping weight: 95 lbs.

Megatouch MAXX Select - Slim MAXX

Dimensions: H - 20”; W - 16”; D - 16-1/2”

Shipping dimensions: H - 22”; W - 20”; D - 17-1/2”

Shipping weight: 88 lbs.

Megatouch EZ MAXX - MAXX Elite

Dimensions: H - 16”; W - 17-1/2”; D - 15-1/2”

Shipping dimensions: H - 18-1/2”; W - 21”; D - 20”

Shipping weight: 75 lbs.

MAXX Upright

Dimensions: H - 54-1/4”; W - 24”; D - 26-1/2”
Shipping dimensions: H - 57-3/4"; W - 28"; D - 30"
Shipping weight: 250 lbs.

Blue MAXX Upright

Dimensions: H - 54”; W - 24”; D - 26-1/2”
No shipping dimensions or weight available

*An optional coin Mech/bill acceptor (Mars 2000) combination unit is available for all countertop models.

Cabinet Information - General Information - All Cabinet Styles

Megatouch MAXX Technical Reference Manual

Cabinet Information - General Information - Full MAXX

Megatouch MAXX Technical Reference Manual

Megatouch Full MAXX

Dimensions: H - 15-1/4”; W - 20”; D - 18-1/4”

Shipping dimensions: H - 26-1/2"; W - 23"; D - 21-1/4"

Shipping weight: 95 lbs.

Motherboard Information

Mitsubishi

Telco

Touchscreen Type

Microtouch

Cabinet Information - General Information - Full MAXX

Megatouch MAXX Technical Reference Manual

Full MAXX

TOUCHSCREEN

ASSEMBLY

SA0103-01

MONITOR

BEZEL

HW0092-01

LID ASSEMBLY
SA0168-XX

SMILEY BILL

ACCEPTOR

BEZEL

HW0088-02

REJECT
BUTTON
HW0089-01

SIDE LOCK
HW8733-03

CHASSIS
MW0181-01

SMILEY

COVER PLATE

HW0093-01

TWIN SPEAKER

ASSEMBLY

SA0173-01

MARS

COVER PLATE

HW0090-01-0A

MARS BILL

ACCEPTOR

BEZEL

HW0088-01

Cabinet Information - General Information - Full MAXX

Megatouch MAXX Technical Reference Manual

Full MAXX

C O IN C H U T E

M W 02 00-01

C O IN B O X

H A R N E S S

S A 0176-01

M E T R IM A T E

R E C E P T A C LE

C N 750 7-02

C O IN B O X LO C K
H W 8731

C O IN B O X LID

M W 0168-01

O P T IC A L

C O IN

S E N S O R

S A 10042-0 1

CENTRONICS
RIBBON CABLE
EC2191-06

TELCO MOTHERBOARD

ASSEMBLY

SA0163-04

MITSUBISHI MOTHERBOARD

ASSEMBLY

SA0163-05

CIRCUIT BREAKER

EC0340

POWER SUPPLY

EC7528-02

ROCKER SWITCH

SW4024

POWER SUPPLY

CONNECTOR SA0157-02

PC CARD

SLOTS

I/O BOARD

SA10047-01-0B

CENTRONICS

CONNECTOR

SA10043-02

Cabinet Information - General Information - Blue MAXX - MAXX Classic

Megatouch MAXX Technical Reference Manual

Megatouch Blue MAXX - MAXX Classic

Dimensions: H - 15-1/4”; W - 20”; D - 18-1/4”

Shipping dimensions: H - 26-1/2"; W - 23"; D - 21-1/4"

Shipping weight: 95 lbs.

Motherboard Information

Mitsubishi

Unicorn

Telco

Touchscreen Type

Microtouch

ELO

Blue MAXX - MAXX Classic Countertop

Cabinet Information - General Information - Blue MAXX - MAXX Classic

Megatouch MAXX Technical Reference Manual

REAR DOOR HINGE
(MW5164)

MONITOR HARNESS

(SA0225-04)

CLAMP CORD

(MW0038-01)

12VOLT COUNTER

(EC9154-02)

BRACKET COUNTER

(MW0012-01)

CHASSIS

(MW0009-01)

4" SPEAKER ASSY

(SA4084-02)

LOCK (HW8741)

CAM (HW8756)

ANTI-SKID PAD

(HW8018-01)

LAZY SUSAN

(HW8993-02)

MONITOR (EC9377)

SCREEN (SA9824-01)

TAPE KIT

(SB0016-01)

RIGHT SIDE PANEL

BLUE MAXX (WD0001-03)

CLASSIC MAXX (WD0001-05)

SIDE DECAL

JADE (GL3100-44 (LEFT))

JADE (GL3100-45 (RIGHT))

BLUE (GL3100-04)

GASKET BEZEL ASSY.

(SA5129-01)

BOLT LOCK

(MW0023-01)

CTOP DOOR ASSY

(MWOO16-01)

TOP COVER

(MW0013-01-XX)

I/O BOARD
CLASSIC (SA10051-02)
BLUE (SA10051-01)

MAIN HARNESS
(SA0108-03)

RKER SWITCH
(SW4024)

U BOLT W/KEPNUT FOR ALL ASSY.
U-BOLT (HW1310) NUT (HW3301)

LOCK BRACKET
(MW0015-01)

POWER SUPPLY
(EC7531)

ATX BRACKET

(MW0352-01)

POWER SUPPLY
(EC7528)

SPLY BRKT.
(MW0011-01)

RKER SWITCH
(SW4024)

TOUCHSCREEN CONTROLLER
(EC9840-03) SMT3E

CENTRONICS ASSY.
(EC2198-01)

PLASTIC TUBE
(HW9001)

TOUCHSCREEN W/VGA ASSY.
(SA0103-01)

LEFT SIDE PANEL
BLUE MAXX (WD0001-04)
CLASSIC MAXX (WD0001-06)

PLATE LATCH
LEFT (MW0014-02)
RIGHT (MW0014-01)

FAN ASSY
(SA5117-04-XX)

FAN POWER CONNECTOR
(SA0117-01)

LOCK (MW0024-01- CAM LOCK)
LOCK W/O CAM (HW8734-01)
COTTER PIN (HW1501-01)

HARD DRIVE

(PA3021-01 - JADE 2)

Blue MAXX - MAXX Classic Countertop

PCB GUIDES

MOTHERBOARD

ASSEMBLY

Cabinet Information - General Information - Blue MAXX - MAXX Classic

Megatouch MAXX Technical Reference Manual

COIN MECH

(HW8159-01)

SPRING, EXT, SST

(HW8314-01)

$1,$2,$5 500 BILL STACKER

(EC9796-01)

BILL ACCEPTOR BEZEL

(HW0004-01-0A)

COIN BOX DOOR LOCK
(HW8727)
COIN BOX DOOR
(MW0052-01-0A)

METRIMATE CONNECTOR AND HARNESS

(SA0047-02-0A

COIN BOX STOP BRACKET
(MW0043-01)

FRONT FACE

COIN REJECTOR PUSH BUTTON
(HW0003-01)

Blue MAXX - MAXX Classic Countertop

Cabinet Information - General Information - Blue MAXX - MAXX Classic

Megatouch MAXX Technical Reference Manual

Megatouch MAXX Select - Slim MAXX

Dimensions: H - 20"; W - 16"; D - 16-1/2"

Shipping dimensions: H - 22”; W - 20”; D - 17-1/2”

Shipping weight: 88 lbs.

Motherboard Information

Mitsubishi

Unicorn

Touchscreen Type

Microtouch

Cabinet Information - General Information - Megatouch MAXX Select - Slim MAXX

Megatouch MAXX Technical Reference Manual

Cabinet Information - General Information - Megatouch MAXX Select - Slim MAXX

Megatouch MAXX Technical Reference Manual

MAXX Select - Slim MAXX Countertop

SA0213-02

EC9824

HW0089-01 (SLIM MAXX)

HW0089-02 (MAXX SELECT)

EC9796

SA0218-01

HW0088-01-0A (MARS)
HW0088-02-0A (SMILEY)
HW0088-03 (MAXX SELECT)

HW8741

MW0183-01

HW0088-01-0A (MARS)
HW0088-02-0A (SMILEY)
HW0088-03 (MAXX SELECT)

EC9796

SA0172-01

SA10042-01

HW8159-01

HW0089-01
(SLIM MAXX)
HW0089-02
(MAXX SELECT)

Cabinet Information - General Information - Megatouch MAXX Select - Slim MAXX

Megatouch MAXX Technical Reference Manual

SA0172-01

EC9840-03

SA0211-02

SA0215-02

EC9402-03

MAXX Select - Slim MAXX Countertop

Megatouch EZ MAXX - MAXX Elite

Dimensions: H - 16”; W - 17-1/2”; D - 15-1/2”

Shipping dimensions: H - 18-1/2”; W - 21”; D - 20”

Shipping weight: 75 lbs.

Motherboard Information

Mitsubishi

Unicorn

Touchscreen Type

Microtouch

Cabinet Information - General Information - Megatouch EZ MAXX - MAXX Elite

Megatouch MAXX Technical Reference Manual

EZ MAXX - MAXX Elite Countertop

BEZEL ASSY

(MP0009-02) EZ MAXX

(MP0009-04) ELITE

15" LCD DISPLAY

(EC9381-01)

TOUCH SCREEN (EC9850-01)

TILT MECH

(SA0236-01) EX MAXX ONLY

EZ MAXX FRONT COVER

(MP0005-03)

ELITE FRONT COVER

(MP0005-06)

(SA0238-01) EZ MAXX

(SA0238-02) ELITE MAXX

EZ MAXX DECAL

(GL3102-01)

NO DECAL FOR ELITE

Cabinet Information - General Information - Megatouch EZ MAXX - MAXX Elite

Megatouch MAXX Technical Reference Manual

COIN ENTRY PLATE

(HW8031-01)

LCD DISPLAY

(EC9381-01)

COIN DRAWER

(SA0240-03) ELITE MAXX

(SA0240-02) EZ MAXX

TOUCHSCREEN CONTROLLER

(EC9840-03)

LINE FILTER

(EC9304-01)

CASH BOX LOCK

(HW8733-05) CROSS PRODUCT

LAZY SUSAN (HW8993-02)

ANTI-SKID PAD (HW8018-01)

LINE CORD

(EC2001)

CIRCUIT BREAKER

(EC3040) ELITE MAXX

"U" BOLT (HW1310)

TOP COVER PLATE

(MP0002-03) EZ MAXX

(MP0002-06) ELITE MAXX

EZ MAXX - MAXX Elite Countertop

BOTTOM

ENCAP

LATCH

TOP

ENDCAP

LATCH

LATCH DETAIL

RIGHT END CAP
(MP0001-02) EZ MAXX
(MP0001-08) ELITE MAXX

LEFT END CAP

(MP0001-01) EZ MAXX

(MP0001-07) ELITE MAXX

MITSUBISHI 2 SLOT RISER BOARD

(EC0028-02)

TILT WHEEL

ONLY ON EX MAXX ASSY

SPEAKER ASSY.

(SA4084)-CROSS PRODUCT

POWER SUPPLY

(EC7529-01) EZ MAXX

(EC7531-01) ELITE MAXX

586 MITSUBISHI MOTHERBOARD

(SA0163-08)

(SA0163-13) (NOVA) WITH PRINTER

UNICORN MOTHERBOARD

(EC0026-09)

COIN DISTRIBUTION BOARD
(SA10052-XX)

HARD DRIVE

(PA3021-01 - JADE 2 EDITION)

Cabinet Information - General Information - Megatouch EZ MAXX - MAXX Elite

Megatouch MAXX Technical Reference Manual

MAXX Elite with Integrated Coin/Bill Assembly

MP0009-04

EC9381-02

MW0322-01

MW0323-01

HW8721

EC9850-01

MP0001-07, -08

MP0013-01

SA0235-04

Cabinet Information - General Information - Megatouch EZ MAXX - MAXX Elite

Megatouch MAXX Technical Reference Manual

MP0002-06

HW8031-01

MW0324-02

EC9840-03

EC9796-04

EC9304-01

EC3040

EC2008-01

HW1310

CN4451-01

CN4452-01

HW8733-05

HW8993-02
HW8018-02

MW0431-01

SA5117-08

SW4024

MW0244-03

HW8401-01

SA0237-03

SA0240-04

SA0298-01

MAXX Elite with Integrated Coin/Bill Assembly

MW0327-01

MW0425-01

SA4084

(2 PLACES)

EC7531-02, -03

SA10051-02

EC0028-03

HW8159-01

SA0163-14

EC0026-09

PA3021-01

Cabinet Information - General Information - Megatouch EZ MAXX - MAXX Elite

Megatouch MAXX Technical Reference Manual

MAXX Upright

Dimensions: H - 54 -1/4”; W - 24”; D - 26-1/2”

Shipping dimensions: H - 57-3/4"; W - 28"; D - 30"

Shipping weight: 250 lbs.

Motherboard Information

Mitsubishi

Unicorn

Touchscreen Type

Microtouch

Cabinet Information - General Information - Megatouch MAXX Upright

Megatouch MAXX Technical Reference Manual

Cabinet Information - General Information - Megatouch MAXX Upright

Megatouch MAXX Technical Reference Manual

MONITOR SIGNAL
CABLE

TOUCHSCREEN
CONTROLLER
CABLE CONNECTOR

I/O BOARD

(SA10052-01)

CONTRONICS RIBBON
CABLE CONNECTOR
(EC2198-01)

586 MITSUBISHI MOTHERBOARD
(SA0163-08)
(SA0163-13) (NOVA) WITH PRINTER

UNICORN MOTHERBOARD
(EC0026-09)

POWER SUPPLY
(EC7531-01)

HARD DRIVE

(PA3021-01)

JADE 2 EDITION

19"OVERLAY

(SA9823-01)

T/S CONTROLLER
(EC9840-03)

19" MONITOR ASSY.

(EC9378-OA)

FOAM TAPE KIT
(SB0016-01)

19" BEZEL

(HW9500-01)

MAXX Upright

Cabinet Information - General Information - Megatouch MAXX Upright

Megatouch MAXX Technical Reference Manual

MAXX Upright

4" SPKR ASSY

(SA4084)

FRONT BEZEL LOCK

LOCK FLAT,STR,#564

1-7/16

(HW8716)

BEZEL ASSY.

(SA3243-02)

LEFT SIDE PANEL

(WD0030-02)

COIN BOX ASSY.

(SA3248-01)

RIGHT SIDE PANEL
(WD0030-01)

STAY ARM
(MW0095-01)

FRONT DECAL

(GL3016-XX)

SIDE DECAL
LEFT SIDE (GL3017-01)
RIGHT SIDE (GL3017-02)

FAN ASSY
(SA5117-05-XX)

MOTHERBOARD/
HARD-DRIVE
(SA0217-01)

B/A ASSY.(EC9796-01)
BRKT. B/A MW0146-01
LOCK-HW8731

COIN MECH-HW8249
ELEC-HW8317-XX

LAMP ASSY.-USA (SA0177-04-OA)
EURO-(SA0177-03-OA)
BULB-(LB1130-01)

Cabinet Information - General Information - Megatouch MAXX Upright

Megatouch MAXX Technical Reference Manual

MAXX Upright

BOLT LOCK
(MW0023-07)

REAR DOOR

Blue MAXX Upright

Dimensions: H - 54”; W - 24”; D - 26-1/2”

No shipping dimensions or weight available

Motherboard Information

Mitsubishi

Touchscreen Type

Microtouch

Cabinet Information - General Information - Megatouch Blue MAXX Upright

Megatouch MAXX Technical Reference Manual

Cabinet Information - General Information - Megatouch Blue MAXX Upright

Megatouch MAXX Technical Reference Manual

SA3202-05-0A

WD2013-01-0C

SA3210-03-0B

EC9378-0A

MW5001-01

MW5014-01-0B

SA3230-01

HW8951-02-0B

SA4084

MW5006-01

Blue MAXX Upright

EC2001

HW8960

MW5003-01

MW5003-02

EC9840

HW8989

SA5117-05-0A

SW4024

Cabinet Information - General Information - Megatouch Blue MAXX Upright

Megatouch MAXX Technical Reference Manual

Blue MAXX Upright

CPU SHELF

HARD DRIVE

MOUNTING PLATE

Megatouch MAXX Parts List

Cabinet Information - General Information - Megatouch MAXX Parts List

Megatouch MAXX Technical Reference Manual

Item

Description

CN4451-01

RJ45 CPLR,8POSN,R/A,PNL MTG

CN4452-02

RJ-11,SPLTR,M/F,4 CNDCT

CN4452-03

RJ-11 CPLR,6POSN,R/A,PNL MTG (FOR MODEM)

CN7501

METRIMATE PIN, FEMALE 20-24 AWG

CN7507-02

METRIMATE RECEPT, 19 PIN

CN7508

METRIMATE PLUG, 12 PIN

CN7508-02

METRIMATE PLUG, 19 PIN

EC0003-05

CD-ROM PLAYER, IDE, 4X

EC0005-01

RAM SIMM, 4 MEG, 72 PIN

EC0007-01

TERMINAL BLOCK, 4 POSITION

EC0012-04

UNIV PCMCIA DATA/FAX MDM (MODEM--TOURNAMAXX)

EC0013-01

PCA,RISER BD.TELCO

EC0016-01

RAM,SIMM, 16 MEG, 72 PIN FP

EC0016-02

RAM,SIMM, 16 MEG, 72 PIN EDO

EC0026-01

MITSUBISHI MOTHERBOARD W/SIMMS AND CPU

EC0026-03

586 W/AUD MITSUBISHI MOTHERBOARD

EC0027-01

DIMM,SDRAM,32MB

EC0028-01

MITSUBISHI RISER

EC0028-02

MITSUBISHI TWO-SLOT RISER BOARD

EC0074-03

50' RJ-11 PHONE CABLE

EC2001

CORD,PWR,USA

EC2002

CONT EUR PWR CD, DTCH IEC CONN

EC2004

UK PWR CD W/DTCH IEC CONN

EC2008-01

POWER CORD

EC2008-02

POWER CORD, 240 VAC

EC2008-03

POWER CORD, 230 VAC, UK

EC2008-04

POWER CORD, 230 VAC, SWZ

EC2008-05

ROWER CORD, 230VAC, ASL

EC2008-06

POWER CORD, 2320 VAC, ITA

EC2179-01

CENTRONIC IDE-PWR RBN CBL

EC2187-01

RIBBON CABLE, 9 COND, 31"L

EC2187-01-0A

31", 9 COND RIBN CABLE

EC2187-02-0A

RIBBON CABLE, 9 COND, 31" LONG

EC2187-03

RIBBON CABLE, SHIELDED, 9 COND, 9 INCH

EC2187-07-0A

CABLE, RIBBON, 9COND, 10""L COMM CABL

EC2191-01

RIBBON CABLE, 2X20 PIN, IDE, 20"L

EC2191-05

RBN. CA. 2X20 PIN, IDE, 24"L

EC2191-06

CABLE, RIBBON, 2X20 PIN, IDE, 7""L

EC2191-08

CBL, RBN, 2X20 PIN, IDE, 9"L (TO THE MOTHERBOARD)

EC2191-09

CBL, RBN, 2X20 PIN, IDE, 12"L (TO THE CENTRONICS BRD)

EC2193-01

CBL, RBN, 2X5 PIN, 14"L, COMM DX

EC2198-01

CENTRONIC RCPT-IDE-PWR RBN CABLE

EC3039

CIRCUIT BREAKER 1 AMP PNL MTG

EC3040

CIRCUIT BREAKER 2AMP PANEL MTG

EC6056-01

FL. LAMP ASSY, 15" 230 VAC/50 HZ W/22" CABLE

EC7014

BALLAST, 230 VAC, 50HZ

EC7528-02

POWER SUPPLY, SW, PS/2-PC

Megatouch MAXX Parts List continued

Cabinet Information - General Information - Megatouch MAXX Parts List

Megatouch MAXX Technical Reference Manual

Item

Description

EC7529-01

PWR SPLY, OPEN FR, 100W+12, + 5

EC7531-01

PWR SPLY, 145W =/- 12, +5, +3.3 (Mini Globe or ATX)

EC9154

COUNTER, 12V FROG EYE MOUNTING

EC9154-02

COUNTER, 12V, FROG EYE MOUNTING

EC9304-01

FLTR, LINE, 250VAC@6AMP, IEC

EC9360-XX

VGA CRT, 13" (INDICATE TYPE)

EC9361-XX

VGA 13" MONITOR CHASSIS BD (INDICATE TYPE)

(NOT ALL CHASSIS AND CRT TYPES ARE AVAILABLE / PRICES MAY VARY.)

EC9377

MONITOR, VGA, 13" (W/CHASSIS BOARD & FRAME)

EC9377-07

CRT, 13"VGA, R/A CHAS MTG

EC9378-0A

MONITOR, 19" VGA (OBSOLETE--SELL EC9378-05)

EC9378-05

MONITOR, 19" VGA

EC9381-01

DSPL, LCD, 15" XGA (NO DISCOUNT)

EC9401-01

FAN,CPU 486 MOUNT,12VDC

EC9402-03

FAN 3",12V, 42.5 CFM

EC9410

FAN, TUBAXIAL, 3", 110V

EC9790-01

$1/2/5, 500 STKR, AE2631D5E, MARS

EC9796-01

B / A $1 / 2 / 5 WITH 500 STACKER

EC9796-06

MARS B/A, AE2000, $1/2/5, 7000 STKR

EC9824-02

ELO T/S ASSY 13"

EC9828

WIRE HARN EXTENSION, MARS

EC9840

TOUCHSCREEN CONTROLLER, SMT3

EC9840-02

ELO TOUCHSCREEN CONTROLLER

EC9840-03

TOUCHSCREEN CONTROLLER, SMT3, W/26"L CAB

EC9850-01

OVRLY, TS, 15", W/12" CAB, W/7"ESD

GL2401-20

SAPPHIRE MARQUEE, UPRIGHT, XL

GL2402-02-0A

MAXX MARQUEE, UPRIGHT, XL2

GL2411-03

PLEXI, CLEAR, 19" CABARET SIGN

GL2411-05

PLEXI, CLR, 12.315X8.32, UR, XL2

GL2411-06

PLEXI, CLR, 12.315X8.32X.177, XL2

GL2431-15

SAPPHIRE MARQUEE, XL5

GL3016-02

FT DCL, LWR, BLU & YEL, UR, XL2

GL3017-01

L SIDE DCL, BLU & YEL, UR, XL2

GL3017-02

R SIDE DCL, BLU & YEL, UR, XL2

GL3100-01

DECAL, SIDE PANEL, XL, CTOP

GL3100-03

MAXX DECAL, COUNTER TOP

GL3100-04

DECAL, SIDE PANEL,BLUE MAXX, CTOP

GL3100-05

MAXX DCL, XL3, CTOP

GL3100-40

SAPPHIRE, RIGHT DECAL, CTOP, XL

GL3100-41

SAPPHIRE, LEFT DECAL, CTOP, XL

GL3100-42

SAPPHIRE DECAL, SLIM MAXX

GL3101-01

DECAL, FRONT, XL, CTOP

GL3102-01

ELITE MAXX DECAL

HW0003-01

BUTTON, B / A & CNBX, XL CTOP

HW0004-01-0A

BEZEL, B/A + CNBX, CTOP

HW0020-01

PCB GUIDE, 2.5", SNPN SHLW CHAN

HW0020-02

PCB GUIDE, 3", SNPN SHLW CHAN

Cabinet Information - General Information - Megatouch MAXX Parts List

Megatouch MAXX Technical Reference Manual

Megatouch MAXX Parts List continued

Item

Description

HW0028-01

DISCONTINUED - USE PART # WD0030-01

HW0028-02

DISCONTINUED - USE PART # WD0030-02

HW0031-01-0A

BEZEL TRIM, REAR, UR, XL2

HW0034-01

SPACER RING, LAZY SUSAN

HW0041-01

1"WX.06T MAG TAPE, HD,W/PSA (TAPE FOR SIGN HOLDER)

HW0088-01-0A

BEZEL, MARS, XL2

HW0088-02-0A

BEZEL, SMILEY

HW0088-03

BZL,BLK,MARS,XL3

HW0089-01-0A

BUTTON, REJECT, MARS

HW0089-02

CLASSIC MAXX REJECTOR BUTTON

HW0091-01

AIR FILTER W/GUARD, 3.13 SQ, PLASTIC (ON BACK LID)

HW0092-01

BEZEL, MONITOR

HW0092-01-0A

BEZEL, MONITOR, CTOP, XL2

HW0092-02

BZL,BLK,MON, XL3 (MONITOR BEZEL)

HW0093-01-0A

COVER PLATE, SMILEY, B/A

HW1310

BOLT, "U", 1/4-20X1-1/4"

HW1501-01

COTTER PIN, M2 DIA X 14MM L

HW3301

U BOLT NUT 1/4-20 KEPNUT

HW6366

MOUNTING POST, KNURLED

HW8018-01

ANTI-SKID PAD, 11.5"DIA, RA65 RBR (REPL BY HW8018-02)

HW8018-02

AS PAD,11.5D,W/6.0 C/O (ANTI SKID PAD WITH HOLE)

HW8031-01

GSKT, COIN ENT, CTOP, XL4

HW8031-01

COIN ENTRY PLATE

HW8159-01

$.25 M/CREJ, IMONEX 950

HW8159-04

$1 CAN M/CREJ, IMONEX 950

HW8171-01

PCB GUIDE, 8", SNAP-ON, DEEP CHANNEL

HW8196-01

BACK CHAN ASSY, W / O LKOT COIL

HW8197-01

COIN ACCEPTOR S7

HW8249

FR/PLATE, SINGLE, M, .25, ROLL DOWN

HW8249-04

M/CREJ,SGL,FRPL,ROLL DOWN $1.CAN

HW8279-0A

FRONT PLATE SINGLE W/COIN MECH, ADJUSTABLE

HW8284

FRONT PLATE W/COIN MECH 10, 20, 50, 1 £ UK

HW8285

FRONT PLATE SINGLE, ELEC. W/O COIN MECH

HW8286

ELEC. COIN MECH, 1, 2, & 5 DM (GERMAN)

HW8286-09

ELEC. COIN MECH CAN, .25/$1/$2 330 E/CREJ

HW8286-XX

ELEC. COIN MECH. (INDICATE COUNTRY)

HW8314-01

SPRING, EXT, SST, .24D X3.50L

HW8317-XX

PROGRAMMABLE TD330 E/CREJ (ELEC MECH)

PLEASE INDICATE COUNTRY WHEN PLACING ORDERS. PRICES MAY VARY.

HW8319-XX

ELECTRONIC MECH (INTL U/R MAXX)

PLEASE INDICATE COUNTRY WHEN PLACING ORDERS. PRICES MAY VARY.

HW8358-01

GASKET, NPRN, CLOSED CELL, .187DIA (ON BACK LID)

HW8401-01

FLUSH HANDLE, POCKET PULL

HW8711

ANCHOR PLATE FOR CAM LOCK

HW8713

LOCK, FLAT,STR, 564, 1-7/16 KYRM

HW8713-02

564 LOCK, KYRM, W/O CAM, 1 3/8"L (use HW8716)

HW8716

LOCK,FLAT,STR,#564, 1-7/16" (FRONT BEZEL LOCK)

Cabinet Information - General Information - Megatouch MAXX Parts List

Megatouch MAXX Technical Reference Manual

Megatouch MAXX Parts List continued

Item

Description

HW8721

564 LOCK W/JAM NUT, 7/8" (FOR SERVICE/BACK DOOR)

HW8727

LOCK, FLAT, STR, DIFF, 1-1/8 (CD DR/COIN BX)

HW8731

LOCK, FLAT, 90', DIFF, 7/8"" (COIN BOX LOCK)

HW8733-03

LOCK, HIGH SECURITY, DIFF, 5/8 (SIDE LOCK)

HW8733-05

LK, HSCRTY, KD, 7/8, CAPKY(CASH BX DOOR & SIDE CAR LOCK)

HW8734-01

LOCK, W/O CAM, 564, 5/8"L (REAR DOOR)

HW8741

LOCK, CIRC, BNT, DIFF, 1/2"

HW8756

CAM, BENT, 1/8" OFFSET

HW8911-01

PIN, SPRING, STL, .094 0D X .50L

HW8951-01

BEZEL, MONITOR, URTS, 19" CABARET

HW8951-02-0B

BEZEL, MONITOR, 19" URTS

HW8953

BEZEL, 13’ T/S

HW8960

LEG LEVELER, 2", 3/8-16THD

HW8979

SLIDE LATCH

HW8989

FAN GUARD, 2.8""

HW8993-02

LAZY SUSAN, 12" DIA, 15 DEG. STOPS

HW9001

TUBING, PLASTIC

HW9461-03

SIGN HOLDER, PETG, 4 X 12, CTOP

HW9500-01-0A

BEZEL, MONITOR, UR, XL2

KUV-107-001

COIN/BILL ACCEPTOR KIT, XL CTOP

LB1030-01

BULB, 9", 6 WATT, CW

LB2100

LAMP, FL, 15W, F15T8CW

MP0001-01

L SIDE CVR, GRN, CTOP, XL

MP0001-02

R SIDE CVR, GRN, CTOP, XL4

MP0001-07

L SIDE CVR,BLU,XL4

MP0001-08

R SIDE CVR,BLU,XL4

MP0002-03

TOP CVR, 15", SIL, COIN ENT, XL4

MP0002-06

TOP CVR, 15", BLU, COIN ENT, XL4

MP0003-02

TOP CVR, 4.50", SIL, CTOP, XL4

MP0005-03

FR CVR, GRY, COIN RTN, XL4

MP0005-06

FR CVR,BLU,CN RTN,XL4

MP0006-02

SPCR, SIDECAR, SIL, CTOP, XL4

MP0009-02

BEZEL, 15" LCD, SIL, CTOP, XL4

MP0009-04

BEZEL, 15" LCD, GRY, XL4

MP0011-01

BRG SEAT,DSPL PVT,CTOP,XL4

MW0009-01

CHASSIS,CTOP,XL

MW0009-01-0C

CHASSIS, CTOP, XL

MW0009-02

CHASSIS, CTOP, MAXX

MW0010-01-0G

FRAME, DISPLAY, CTOP, XL

MW0011-01

POWER SUPPLY BRACKET

MW0011-01-0B

BARCKET, PWR SUPPLY, CTOP, XL

MW0012-01-0A

PRINTER INTERFACE BRACKET

MW0012-01-0C

BRACKET, CONN/COUNTER, CTOP XL

MW0013-01-0C

TOP, CTOP, XL

MW0014-01-0B

PLATE, (RIGHT) LATCH, CTOP, XL

MW0014-02-0B

PLATE, (LEFT) LATCH, CTOP, XL

MW0015-01

BRACKET, LOCK, CTOP XL

Cabinet Information - General Information - Megatouch MAXX Parts List

Megatouch MAXX Technical Reference Manual

Megatouch MAXX Parts List continued

Item

Description

MW0016-01-0C

DOOR, CTOP, XL

MW0017-01

COIN BOX, CTOP, XL

MW0020-01-0B

COIN CHUTE ENTRY, LEFT XL CTOP

MW0021-01

COIN CHUTE ENTRY, RIGHT XL CTOP

MW0023-01

BOLT, LOCK, CTOP, XL

MW0023-04

BOLT, LOCK, 7.99"L,UR, XL2

MW0023-06

BOLT, LOCK, CTOP, XL3 (CAM FOR HW8734-01)

MW0023-07

REAR DOOR BOLT LOCK, 8.69L, UR

MW0024-01

CAM, LOCK (REAR DOOR)

MW0028-01

PLATE, POWER ENTRY

MW0037-01-0A

CAM, LOCK, .75 X 2.0

MW0038-01

CORD CLAMP, XL

MW0039-01-0C

DOOR, CD-ROM ACCESS, XL, CTOP

MW0043-01

COIN BOX STOP BRACKET

MW0044-01

DOOR LOCK LATE, UR

MW0051-01

LINKAGR, COIN RETURN XL CTOP

MW0052-01-0A

DOOR, B / A & COIN W/BOX XL CTOP

MW0057-01

COVER, FAN PROTECTOR

MW0061-02

COVER, FAN PROTECTOR, UR, XL2

MW0063-01

PLATE, MOUNTING, PC POWER, XL

MW0063-01-0K

PLATE, MTG, PC/PWR, XL

MW0095-01

STAY ARM, UR, XL2

MW0097-01-0A

TAMPER PROOF BEZEL BRKT, UR, XL2

MW0098-01-0A

STAY ARM HAT BRKT, UR, XL2

MW0100-01

COIN BOX CHUTE

MW0101-01

SPACER, COIN BOX BRACKET, UPPER

MW0118-01-0B

BRKT, SMILEY, UR, XL2

MW0119-03

BRKT, M/CREJ, ROLL DN, UR, XL2

MW0124-01-0B

HINGE, UR, XL2

MW0129-01

CVR PLT, B/A OPNG, UR, XL2

MW0138-01-0B

BRACE, 2 POINT LOCK, UR, XL2

MW0146-01

BRKT, MARS B/A, UR/, XL2

MW0157-01

SWITCH, PANEL,XL3 (FOR COUPLERS)

MW0158-01

LOCK BAR, CTOP, XL3

MW0159-02

CAM W/DBL D C/O, LOCK, CTOP, XL3

MW0161-01

B/A SECURITY BAR,CTOP,XL3

MW0163-01

BRACKET, RISER/586 SPRT, CTOP

MW0168-01

LID, COIN BOX

MW0171-01

CAM, LID, COIN BOX, 5/8, CTOP (CAM FOR COIN BOX LOCK)

MW0171-03

CAM, .83, NCH, CNBX LID CTOP XL2

MW0173-01

ELECTRONICS BOX, CTO

MW0174-01

LID, ELECTRONICS BOX, LOWER, CTOP

MW0175-XX

LID, CTOP (-01: GREEN; -02: BURGUNDY)

MW0177-01

BRACKET, SPRT, TELCO PENTIUM

MW0179-01

CAM, LOCK, COIN BOX, CTOP (CAM FOR SIDE LOCK)

MW0181-01

CHASSIS, CTOP

MW0190-01

LID, ELECTRONICS BOX, CTO

Cabinet Information - General Information - Megatouch MAXX Parts List

Megatouch MAXX Technical Reference Manual

Megatouch MAXX Parts List continued

Item

Description

MW0191-01

BRACKET, POWER SUPPLY, CTOP

MW0192-01

BRACKET, CABLE CLAMP, CTO

MW0193-01

BRACKET, COIN BOX, UPPER

MW0194-01-0A

BRACKET, COIN BOX STOP

MW0200-01

COIN CHUTE, ENTRY, CTOP

MW0201-01

BRACKET, LEFT, HARD DRIVE SHOCK MTG, CTOP

MW0201-02

BRACKET, RIGHT, HARD DRIVE SHOCK MTG, CTOP

MW0203-01

BRACKET, RISER CLAMP, TELCO PENTIUM

MW0206-01

MAIN CHASIS, CTOP, XL3

MW0209-01

BONNET,GRN,CTOP,XL3 (METAL TOP NO DECAL)

MW0209-02

BONNET,BURG,CTOP,XL3 (METAL TOP NO DECAL)

MW0209-03

BONNET,BLK,CTOP,XL3 (METAL TOP NO DECAL)

MW0210-01

BACK, ACCS, PL, CTOP, XL3

MW0210-02

BACK, ACCS, PL, CTOP, XL3 (BACK DOOR)

MW0211-01

MTHBD, SHELF, CTOP, XL3

MW0220-01

3PT BOP CAM, CTOP, XL3

MW0221-01

ANGLE,SCTY REINF, UR, XL5

MW0226-01

BRKT, L, I/O/RISER BD, XL

MW0228-01

BRKT, R, I/O/RISER BD, XL

MW0237-01

CHAS, MAIN, CTOP, XL4

MW0238-02

DOOR, REAR, GRY, CTOP, XL4

MW0241-01

BRKT,TOP,MAIN,CTOP,XL4

MW0242-01

BRKT,SIDE PNL,L,CTOP,XL4

MW0242-02

BRKT,SIDE PNL,R,CTOP,XL4

MW0243-01

DRAWER, CNBX, CTOP, XL4

MW0244-02

DRAWER, FACE, GRY, CTOP, XL4

MW0244-03

DRAWER, FACE, BLU, CTOP, XL4

MW0245-01

DRAWER CVR, CTOP, XL4

MW0246-01

LATCH CLIP,UPR,CTOP,XL4

MW0246-02

LATCH CLIP,LWR,CTOP,XL4

MW0248-01

BRKT,LWR BEZEL,CTOP,XL4

MW0253-01

LOCK BAR, CNBX DOOR, CTOP, XL4

MW0254-01

CAM LOCK, CNBX DOOR, CTOP, XL4

MW0260-01

LCH,S/PNL,UPR-L,CTOP,XL4

MW0260-02

LCH,S/PNL,LWR-L,CTOP,XL4

MW0260-03

LCH,S,PNL,UPR-R,CTOP,XL4

MW0260-04

LCH,S,PNL,LWR-R,CTOP,XL4

MW0268-01

COIN CHUTE, UR, XL5

MW0269-01

LOWER COIN CHUTE, UR, XL5

MW0281-05

BRKT,PWR ENT,BLU,ATX,XL4

MW0283-01

FAN GUARD, CTOP, XL3

MW0292-01

CNBXSCTY CLIP,CTOP,XL3

MW0296-01

3PT LOCK BAR HLDR, UR, XL5

MW0297-01

HANDLE/SWITCH PLT, UR, XL5

MW0298-01

BRACE/MARQUEE BRKT, UR, XL5

MW0301-01

COINBOX, UR, XL5

MW0321-01

PLATE,SIDE LATCH,CTOP,XL4

Cabinet Information - General Information - Megatouch MAXX Parts List

Megatouch MAXX Technical Reference Manual

Megatouch MAXX Parts List continued

Item

Description

MW0322-01

CAM, 3 PT, REAR DR, CTOP, XL4

MW0323-01

LOCK BAR, REAR DR, CTOP, XL4

MW0324-02

PLATE,COIN ENT,TLT,CTOP,XL4

MW0327-01

CHUTE,COIN RTN,CTOP,XL4

MW0334-01

CHAS, S/CAR, 4.5", CTOP, XL4

MW0335-03

FR PL, S/CAR, LTGRY, MARS B/A, XL4

MW0336-01

DR, REAR, S/CAR, GRY, CTOP, XL4

MW0337-01

CAM, S/CAR, CTOP, XL4

MW0338-01

LOCK BAR, S/CAR, CTOP, XL4

MW0339-01

CUP, COIN RTN, TLT, CTOP, XL4

MW0343-01

FLAP, COIN RTN CUP, CTOP, XL4

MW0346-01

CHASSIS,MAIN,ATX,CTOP,XL4

MW0351-02

DOOR,REAR,BLU,ATX,XL4

MW0352-01

BRKT,ATX,ENET,CTOP,XL

MW0388-01

BRKT,UNIV,ETR I/O RISER

MW1670-01

SPEAKER MTG BKT, 19" CABARET

MW1671-01

BRHT, GLASS, UPPER, 19" CABARET

MW1672-01

CONTROL PANNEL, 19" CABARET

MW1674-01-0B

MONITOR SUPPORT, LEFT, 19" CABARET

MW1674-02-0B

MONITOR SUPPORT, RIGHT, 19" CABARET

MW2013-01

DUCK BILL CAM, UR, XL5

MW5001-01

STAY LID, URTS, 19"

MW5003-01

BRACKET, CRT ADJUST, LEFT

MW5003-02

BRACKET, CRT ADJUST, RIGHT

MW5006-01

COVER, PERFORATED, SPEAKER, 4"

MW5008-01

BRACKET, CRT LEFT, 19" URTS

MW5008-02

BRACKET, CRT RIGHT, 19" URTS

MW5014-01-0B

BEZEL/HINGE ASSY, 19" URTS

MW5153-01

DOOR, COIN BOX, CTOP

MW5164-01

HINGE, REAR DOOR CTTS

PA3021-01

MAXX JADE 2 HARD DRIVE ASSEMBLY V15

PM0240-02

OWNER'S MANUAL, XL3

PM8928-14

SIGN, MEGATOUCH XL, CTOP XL6000

PM8928-15

SIGN, BLUE MAXX

PM8928-47

RUBY SIGN

PM8928-53

RUBY 2 COUNTERTOP SIGN

SA0013-02

WIRE HARN, MARS B/A, MODIFIED XL

SA0014-01

HARN, E/M/CREJ, 19" CABARET

SA0014-03

WIRE HARN, E OR M/CREJ, 19" CAB, XL

SA0047-02

COIN BOX HARNESS ASSY

SA0047-02-0A

COIN BOX HARNESS ASSY

SA0058-01

HARNESS, POWER SWITCH, URTB/URTS/CAB, XL

SA0063-01

HARNESS, POWER, DUAL FANS, URTS

SA0067-01

HARNESS, VOLUME POT, URTS/CAB, 260

SA0077-01

HARNESS, MAIN, XL

SA0096-03

PWR ENTRY W/O COMM, UR, XL2

SA0101-01

ASSY, MOTHERBOARD, DE-AMER

Cabinet Information - General Information - Megatouch MAXX Parts List

Megatouch MAXX Technical Reference Manual

Megatouch MAXX Parts List continued

Item

Description

SA0101-02

ASSY, MOTHERBOARD XL, TELCO

SA0101-03

ASSY, MOTHERBOARD, TELCO

SA0102-01

HARNESS, COIN BOX, MGATCH XL, CTOP

SA0102-02

PRINTER INTEREFACE

SA0102-03

HARNESS, COIN BOX, MGATCH XL, CTOP

SA0103-01

TOUCHSCREEN/VGA DISPLAY ASSEMBLY, 13

SA0105-01

COVER ASSY, CTOP, XL

SA0105-02

COVER ASSY, CTOP, BLUE MAXX

SA0105-03

SIL&BLK CVR, CLASSIC MAXX

SA0106-01

POWR ENTRY ASSY, CTOP XL, 120V (OLD)

SA0106-09

PWR ENT,ATX,BLU MAXX (NEW)

SA0106-11

DOM,W/COMM CPLRS,ATX,PWR ENT

SA0107-01

COIN BOX ASSY. COMPLETE W/MECH $0.25 USA

SA0107-XX

COIN BOX ASSY. COMPLETE W/ELEC MECH

SA0108-01

HARNESS, MAIN, CTOP, XL

SA0108-03

HARN, MAIN, CTOP, BLUE MAXX

SA0111-01-0A

HARNESS, DISPLAY, AC, CTOP

SA0112-01

ASSY, MOTHERBOARD & I/O, XL (DE-AMER)

SA0112-02

ASSY, MOTHER BOARD & I/O, XL (DE-AMER)

SA0112-03

ASSY, MOTHER BOARD & I/O, XL (TELCO)

SA0117-01

CABLE, POWER EXTENSION, FAN

SA0118-01

CABLE, POWER EXTENSION, CD ROM

SA0118-02

CABLE, POWER EXTENSION,MAXX

SA0118-03

CBL, PWR EXT, PCA/HDD, XL3

SA0119-01

DOOR ASSY, CD-ROM ACCESS, XL, CTOP

SA0139-01

ELO TS/VGA DSPLY ASSY 13"

SA0157-02

R/A IEC W/LFL, CTOP

SA0163-04

586 BOARD AND I/O ASSEMBLY (TELCO) (OBS)

SA0163-05

MITSUBISHI 586 BD & I/O, XL2

SA0163-07

MITSUBISHI 586 & I/O, BLUE MAXX

SA0163-08

M586 W/PCMCIA CTOP

SA0163-13

M586,PCMCIA, W/O PTR

SA0163-14

UNCRN,PCMCIA,W/O PTR

SA0164-01

HARNESS, MAIN, CTOP, XL2

SA0165-01

ASSEMBLY, SWITCH/COUNTER, CTOP

SA0168-XX

ASSEMBLY, LID, CTOP

SA0169-01

.25/$1/$2/$5 CNBX, XL2 (FULL MAXX)

SA0169-02

.25 & B/A-RDY CNBX, XL2 (FULL MAXX)

SA0172-01

CNBX HARN, MARS, XL2

SA0173-01

TWIN SPEAKER ASSEMBLY, CTOP

SA0175-01

HARNESS, DC FAN, CTOP

SA0176-01

HARNESS, COIN BOX, SMILEY, CTOP

SA0177-03-0A

F-LMP FXTR, 220V/50HZ, 6 WATT

SA0177-04-0A

F-LMP FXTR, 117V/60HZ,6WATTS

SA0178-01

HARN, MAIN,UR,XL2

SA0181-02

HARN, COIN MECH, UR, XL5

SA0182-01

TOUCHSCREEN CTRL BD ASSY, SMT3

Cabinet Information - General Information - Megatouch MAXX Parts List

Megatouch MAXX Technical Reference Manual

Megatouch MAXX Parts List continued

Item

Description

SA0184-01

HARN, MARS B/A, UR, XL2

SA0185-02

HARN, SMLY B/A, UR, XL2

SA0201-01

CENTRONICS MTG BRKT ASSY,XL

SA0209-01

HARN MAIN, CTOP, XL3

SA0209-02

HARN MAIN, CTOP, XL3

SA0210-01

HARN/SPEAKER ASSY, CTOP, XL3

SA0211-01

PWR ENT W/COMM CPLRS, XL3, CTOP

SA0212-01

MINI PWR SPLY ASSY, CTOP, XL3

SA0213-01

BEZEL ASSY, CTOP, XL3

SA0213-02

BZL ASSY, BLK

SA0214-01

CHAS ASSY, CTOP, XL3

SA0215-01

DOOR ASSY, CTOP, XL3

SA0215-02

DOOR ASSY, CTOP, XL3

SA0216-01

BONNET ASSY, BLK, CTOP, XL3

SA0216-02

BONNET ASSY, GRN, CTOP, XL4

SA0217-01

PCB/HDD SHELF ASSY, XL3

SA0217-02

PCB/HDD SHELF ATX PWR, XL4 (UNICORN)

SA0217-04

PCB/HDD SHELF ASSY, XL3

SA0218-01

.25/1/2/5 B/A CNBX, CTOP, XL3 (SLIM MAXX)

SA0218-02

.25 & B/A-RDY CNBX, CTOP, XL3 (SLIM MAXX)

SA0218-19

.25/1/2/5 B/A,BLK, XL3 (SELECT MAXX)

SA0218-20

COIN BILL ACCEPTOR READY - SELECT

SA0219-01

MONITOR ASSY, CTOP, XL3

SA0225-04

HARN, AC, ATX, BLUE MAXX

SA0231-01

DUAL FAN ASSY, CTOP, XL3

SA0231-02

DUAL FAN ASSY, CTOP, XL3

SA0232-02

MINI PWR SPLYCHASSIS, CTOP, XL3

SA0235-01

DSPL W/BZL, 15", SIL, CTOP, XL4

SA0235-03

DSPL W/BZL, 15", GRY, CTOP, XL4

SA0236-01

TILT MECH, CTOP, XL4

SA0237-01

TOP CVR, SIL, CTOP, XL4

SA0237-03

TOP CVR, BLU, CTOP, XL4

SA0238-01

BOTTOM FRONT CVR, SIL, CTOP, XL4

SA0238-02

BOTTOM FRONT CVR, BLU, CTOP, XL4

SA0240-02

CNDWR, GRY, CTOP, XL4

SA0240-03

CNDWR, BLU, CTOP, XL4

SA0241-01

SIDE CVR, L, CTOP, XL4

SA0241-02

SIDE CVR, R, CTOP, XL4

SA0241-03

SIDE CVR,BLU, L, CTOP, XL4

SA0241-04

SIDE CVR,BLU, R, CTOP, XL4

SA0242-02

PWR ENT, GRY, CTOP, XL4

SA0242-05

PWR ENT, BLU,MDM CPLRS, XL4

SA0250-02

PWR SELF, GRY, CTOP, XL4

SA0250-04

PWR SELF, BLU, CTOP, XL4

SA0255-02

E/CREJ BRKT ASSY, CTOP, XL4

SA0255-03

M/CREJ BRKT ASSY, CTOP, XL4

SA0257-01

HARN, MCREJ, CTOP, XL4

Megatouch MAXX Parts List continued

Cabinet Information - General Information - Megatouch MAXX Parts List

Megatouch MAXX Technical Reference Manual

Item

Description

SA0257-03

HARN, MCREJ, CTOP,5", XL4

SA0258-01

S/CAR W/MARS B/A, SIL/GRY, XL4

SA0258-03

S/CAR W/MARS B/A, BLU, XL4

SA0279-01

FAN,CTOP,XL4,GLOBETEK

SA0282-01

SPARKLE PWR SPLY & Y HARN ASSY

SA10023-01-0G

PCA, I/O BOARD, XL VID, CTOP

SA10025-01-0A

PCA, CRT-502, DE-AMER, RISER BOARD

SA10028-01-0C

PCA, RS-485 COMM, SYSTEM

SA10042-01

PCA, OPTICAL COIN SENSOR

SA10043-02-0A

PCA, CENTRONICS CONN BOARD, SOCKET

SA10046-01

PCA, ESD FILTER BOARD

SA10047-01-0A

PCA,I/O BOARD, CTOP (obsolete)

SA10047-01-0B

PC IN/OUT BRD, XL2, VID CTOP

SA10051-01

I/O BOARD, XL2 VID, PRINTER

SA10051-02

I/O BOARD,XL2 VID,W/O PRINTER (NO KEY)

SA10052-01

PCA, COIN DISTRIBUTION BD, XL4

SA10052-02

PCA, CN DISTR,EXP, XL4

SA3014-03

EPROM, 8MEG XL, BOOT (U12- R4)

SA3202-05-0A

SHELF ASSY, TS/CRT (VGA)

SA3209-01

BRACKET ASSY, METER/TEST SWITCH

SA3210-03-0B

TS/CRT (VGA) ASSY, COLOR, 19"

SA3213-10-0A

COIN DR, $0.25, $ 1& 5, (VFM 2) , XL

SA3220-12-0A

COIN DOOR ASSY, $.25/.25 XL

SA3230-01

BEZEL ASSY, 19" URTS

SA3243-02

BEZEL ASSY, UR, XL5

SA3244-01

MONITOR SHELF ASSY, UR, XL2

SA3246-01

DOM SHELF, M586 PC/PWR, UR, XL2

SA3246-02

DOM SHELF, M586 PC/PWR, UR, XL2

SA3248-01

CNBX ASSY, UR, XL5

SA3266-03-0B

CRT ASSY, 19" CABARET, XL, COMPLETE W/ SHELF

SA3283-02

ASSY URTS 19" CABARET 230 VAC

SA4037-02

12V CNTR W/CONN ASSY

SA4084

4" SPEAKER ASSY W/2 PIN CONN

SA4084-02

SPEAKER ASSY, 4", W/6-PIN CONN

SA4084-03

SPEAKER ASSY, 4", W/6-PIN CONN

SA5117-04-0A

FNASY,3",12V,2 PIN CONN,W/O GD

SA5117-05-0A

FAN ASSY, 3", 12VDC, 2 PIN, W/GUARD

SA5117-08

FNASY,3",12V,M&F CONN, W/GUARD

SA5129-01

GASKET/BEZEL ASSY

SA5161-01

HARNESS, COIN BOX, MECHANICAL, CTOP, XL

SA7297-10

SIGN HOLDER, MEGA XL (XL6000 & SIGN ASSY)

SA7297-13

SIGN HLDR,MAG

SA9823-01

OVRLY,19"TS, W/TERMN

SA9824-01

OVRLY, 13" TS, W/TERMN

SA9824-02

OVRLY, 13" TS, W/260 ADPTR (FOR GAMES W/CRT260 BRDS)

SB0010-01-0A

COM, POWER CABLE

SB0016-01

13"/19" TAPE KIT

Cabinet Information - General Information - Megatouch MAXX Parts List

Megatouch MAXX Technical Reference Manual

Megatouch MAXX Parts List continued

Item

Description

SB0359-02

RUBY2 CD UPGRADE

SB6058-01

FL LAMP ASSY, 120VAC/60HZ, 15W

SC3998-01

CPU,486 DX266

SW3005

PB SWITCH, MOMENTARY (SETUP/CALIBRATE)

SW4024

ROCKER SW, DPST, 250V, PANEL MTG

WD0001-01-0B

SIDE PANEL, RIGHT, CTOP XL

WD0001-02-0B

SIDE PANEL, LEFT, CTOP XL

WD0001-03-0B

SIDE PANEL, RIGHT, BLUE MAXX

WD0001-04-0B

SIDE PANEL, LEFT, CTOP BLUE MAXX

WD0001-05

SIDE PNL, R, STNLS&BLK

WD0001-06

SIDE PNL,L, STNLS&BLK

WD0013-01-0B

SHELF, CRT, UR, XL2

WD0024-01

CABINET, UR, XL5

WD0030-01

SIDE PNL,R,UR,XL5

WD0030-02

SIDE PNL,L,UR,XL5

WD2012-01-0B

CABINET, 19" URTS, BLK, REAR ACCESS

WD2013-01-0C

SHELF, CRT MTG, 19" URTS

WD2017-01-0B

CABINET, 19" URTS, BLK, FRONT ACCESS

WD2018-01

SHELF, 19" VIDEO, UNIVERSAL

WD5060-01

WOOD CABINET, URTS, 19" CABARET

WD5061-01-0B

SHELF, MONITOR, 19" CABARET

Section 2

Hard Drive

Information

Hard Drive Numbers

Program Numbers

Part Numbers

Security Key Numbers

MAXX Hard Drive Program Numbers, Part Numbers, and

Compatible Security Keys

All security key program numbers are USA standard.
Hard drive program versions are the latest versions, previous versions in parentheses.

Hard Drive Information - Hard Drive Numbers

Megatouch MAXX Technical Reference Manual

JADE 2 EDIT ION

P rogram # PG3002

V 15.00

Part # PA 3018-01

Security Key # SA 3079-01

JADE EDIT ION

P rogram # PG3002
(V14.00)

P art # PA3018-01

Security Key # SA 3079-01

SAPPH IRE 2 EDIT ION

P rogram # PG3002
(V13.00, V 13.01, V 13.02, V13.10)

P art # PA3017-01

Security Key # SA 3065-01

SAPPH IRE EDIT ION

P rogram # PG3002
(V12.00, V 12.01, V 12.02, V12.03,
V 12.10, V 12.11)

P art # PA3016-01

Security Key # SA 3065-01

RUBY 2 EDIT ION

P rogram # PG3002
(V11.00, V 11.01, V 11.02, V11.05)

P art # PA3014-01

Security Key # SA 3056-01

RUBY EDIT ION

P rogram # PG3002
(V10.00, V 10.02, V 10.03, V10.06,
V 10.07, V 10.08, V10.09, V10.10)

P art # PA3013-01

Security Key # SA 3056-01

EMERALD 2 EDIT ION

P rogram # PG3002
(V9.00, V9.01)

P art # PA3012-01

Security Key # SA 3048-01

EMERALD EDIT ION

P rogram # PG3002
(V8.00, V8.01, V8.02, V 8.03, V8.04,
V 8.05, V8.06)

P art # PA3010-02

Security Key # SA 3048-01

DIAMOND 2 EDIT ION

P rogram # PG3002 V7.03
(V7.00, V7.01, V7.02 V 7.03)

P art # PA3008-01

Security Key # SA 3042-01

CHAMPIONSHIP DIAM OND 2 EDIT ION

P rogram # PG3002 V7.03
(V7.00, V7.01, V7.02 V 7.03)

P art # PA3008-01

Security Key # SA 3043-01

DIAMOND EDIT ION

P rogram # PG3002
(V6.01, V6.00, V6.03)

P art # PA3002-06

Security Key # SA 3042-01

CHAMPIONSHIP DIAM OND EDIT ION

P rogram # PG3002
(V6.01, V6.00, V6.03)

P art # PA3002-06

Security Key # SA 3043-01

MAXX Hard Drive Program Numbers, Part Numbers, and

Compatible Security Keys (cont’d)

Hard Drive Information - Hard Drive Numbers

Megatouch MAXX Technical Reference Manual

All security key program numbers are USA standard.
Hard drive program versions are the latest versions, previous versions in parentheses.

MAXX 2K PLUS

Program # PG3002
(V5.00, V5.01)

Part # PA3002-05

Security Key # SA3035-01

CHAMPIONSHIP MAXX 2K PLUS

Program # PG3002
(V5.00, V5.01)

Part # PA3002-05

Security Key # SA3036-07

MAXX 2K

Program # PG3002
(V4.00, V4.01)

Part # PA3002-04

Security Key # SA3035-01

CHAMPIONSHIP MAXX 2K

Program # PG3002
(V4.00, V4.01)

Part # PA3002-04

Security Key # SA3036-07

MAXX

Program # PG3002
(R01, R02, V3.01, V3.05, V3.06,
V3.07)

Part # PA3002-03

Security Key # SA3031-01

Security Key # SA3022-01

Section 3

Troubleshooting

Information

Touchscreens

Troubleshooting

Touchscreen Calibration

Motherboard Handling Precautions
Motherboard Diagrams
Access/Removal of Major Assemblies

Motherboard

Hard drive

Monitor

Touchscreen

Troubleshooting Guide
CMOS Setup
Mars 2000 Bill Acceptor

DIP Switch Settings

Troubleshooting Information - Troubleshooting Your Touchscreen

Megatouch MAXX Technical Reference Manual

MICROTOUCH:

Features:
•

SMT-3 Controller in white box

•

Green LED on controller lit at half brightness, full brightness when screen is touched

•

Overlay functions on capacitance.

•

Touchscreen cable is on right side of CRT.

Troubleshooting:
•

LED Flashing from 1 to 5 times - detected error or possible defective controller

•

LED not lit - Check +12 vdc. The SMT-3 controller may also be defective.

See Figure 1 for the touchscreen overlay connector schematic.

ELO GRAPHICS:

Features:
•

Controller in a silver box

•

Overlay functions on Sound Acoustic Waves (SAW) - sound waves are reflected
across the screen

•

The green LED is solid when the screen is touched and flashes when the screen is
not touched.

•

Touchscreen cable is on left side of CRT

Troubleshooting:
•

If check for dirt in the ridges around the edge of the screen overlay.

•

If the screen is not responding properly or the LED is solid even when the screen is
not touched:
•

Check the screen for objects that may be attached.

•

Make sure the bezel is dry and not stuck to the screen.

•

Check for dirt in the grooves etched around the outside edge of the screen.

•

The controller may be defective.

CALIBRATION:

1 - Press the Calibrate button.
2 - Touch the dot that appears in the corner for 2 seconds.
3 - Touch the dot that appears in the opposite corner for 2 seconds.
4 - Touch the dot that appears in the center of the screen for 2 seconds.

The cursor should follow your finger wherever you touch the screen.

NOTE: Earlier versions of XL and MAXX software will have a two-point calibration.

CALIBRATION or LOCKUP PROBLEMS:

•

If the calibration is off over the whole area of the screen:

•

Recalibrate the screen.

•

Switch the touchscreen controller with one from another game if possible--a
defective controller can produce this problem.

Troubleshooting Your Touchscreen

Troubleshooting Information - Troubleshooting Your Touchscreen

Megatouch MAXX Technical Reference Manual

Troubleshooting Your Touchscreen (cont’d)

•

If these solutions do not correct the problem, replace the touchscreen.

•

If the calibration is off in one area, check for scratches or nicks on the screen. If you
detect scratches or nicks, replace the touchscreen.

•

If the screen loses calibration entirely, check the ground pin on the line cord.

•

If the touchscreen locks up or does not respond to touch:

•

If the graphics are moving on the screen and the green LED is lit, switch the
controller with a working one to see if the controller is the problem. If the
controller is not the problem, there is a communication error between the
motherboard and controller. Do a CMOS configuration and if this doesn’t fix
the problem, the motherboard may need to be replaced.

•

If the graphics are moving on the screen and the green LED is not lit, contact
Merit Technical Support at (800) 445-9353

•

Microwave ovens and neon lights can and will interfere with the calibration of the
touchscreen and should not be within 6 feet (or 2 meters) of the game.

•

Improper grounding will affect the operation of the touchscreen.

•

If you are experiencing problems with double-touching (e.g. two cards are taken
away after only one touch to the screen), make sure the A/C plug and wall outlets
are properly grounded.

•

The touchscreen cable should not positioned under or on top of the yoke of the
monitor.

•

The touchscreen controller cable should not positioned near the flyback transformer.

NOTE: If the cable was incorrectly installed, the cable will be on the right side of the tube
and the touchscreen response will be out of sync by 180 degrees.

FIGURE 1 - MICROTOUCH TOUCHSCREEN OVERLAY CONNECTOR SCHEMATIC

Troubleshooting Information - Touchscreen Calibration

Megatouch MAXX Technical Reference Manual

Touchscreen Calibration

NOTE: The machine must be in the idle mode or game select mode to calibrate the touch-
screen.

1. Locate and press the CALIBRATE button on the game.

2. With your index finger, touch the center of the first circle that appears on the screen. Once

touched and released, a second circle will appear on the screen.

NOTE: YOU MUST HOLD YOUR FINGER ON THE CIRCLE FOR APPROXIMATELY 2 SEC-
ONDS FOR THE CALIBRATION TO BE RECOGNIZED.

3. With your index finger, touch the center of the second circle that appears on the screen.

4. Once the second circle is touched and released, a crosshair will appear on the screen.

To test the calibration of the screen, touch the crosshair with your finger and slowly
drag your finger around the screen. The crosshair should follow your movement. Touch
the EXIT button.

ATTENTION:

OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DEVICES

Motherboard Handling Precautions

NOTE: Before handling any boards, observe the following procedures:

•

Remove any static charge from your body before handling the boards.

•

Use a ground strap when handling the boards.

•

When plugging in connectors to the board, make sure the connector is inserted
straight onto the header and that the connector covers all header pins.

•

Do not connect any peripheral device to the board if the power is still connected to
the peripheral or if power is already applied to the board.

•

Prevent electro-static discharge by storing the boards in the anti-static bags in which
they are shipped.

Troubleshooting Information - Motherboard Handling Precautions

Megatouch MAXX Technical Reference Manual

$background image$

Troubleshooting Information - Motherboard Diagrams

Megatouch MAXX Technical Reference Manual

FIGURE 1 - ITOX/MITSUBISHI MOTHERBOARD

TOUCHSCREEN

CONTROLLER

CONNECTOR

KEYBOARD

CONNECTOR

PCMCIA

CARD SLOT

CMOS
BATTERY

MONITOR

SIGNAL

CONNECTOR

SPEAKER
CONNECTORS

RISER
CARD

SECURITY KEY
CONNECTOR

I/O BOARD

POWER SUPPLY
CONNECTOR
(OBSCURED)

SOFT DIP

SWITCHES

PRINTER
CONNECTOR
(OPTIONAL)

MOUNTING
SCREW
LOCATION
(2 PLACES)

Motherboard Diagrams

Troubleshooting Information - Motherboard Diagrams

Megatouch MAXX Technical Reference Manual

FIGURE 2 - TELCO MOTHERBOARD

Motherboard Diagrams

POWER SUPPLY

CONNECTOR

HARD DRIVE

CONNECTOR

CENTRONICS
CONNECTOR

MAIN POWER

SUPPLY

HARNESS

SPEAKER

CONNECTOR

MODEM

CONNECTOR

MONITOR

SIGNAL

CONNECTOR

TOUCHSCREEN

CONTROLLER

CONNECTOR

SECURITY

KEY

COMM BOARD

CONNECTOR

Troubleshooting Information - Motherboard Diagrams

Megatouch MAXX Technical Reference Manual

FIGURE 3 - UNICORN MOTHERBOARD

Motherboard Diagrams

DC POWER
HARNESS

IDE 1

UNCONNECTED
SECTION OF I/O
CONNECTOR

TOUCHSCREEN

CONTROLLER

CONNECTOR

MONITOR

SIGNAL

CONNECTOR

SPEAKER
CONNECTOR

AUDIO
BOARD

SUPPORT
BRACKETS

IDE 2

SECURITY KEY

ETHERNET

CONNECTOR

RISER CARD

I/O CONNECTOR

I/O BOARD

DIP

SWITCHES

PRINTER
CONNECTOR
(OPTIONAL)

STANDOFF
SECURING
SUPPORT
BRACKET TO
AUDIO BOARD

STANDOFF SECURING

SUPPORT BRACKET

TO MOTHERBOARD

Troubleshooting Information - Removal/Installation of Major Assemblies -

Full MAXX

Megatouch MAXX Technical Reference Manual

Motherboard Removal

1. Turn off and unplug the game.

2. Unlock and remove the lid.

3. Unscrew the 2 thumbnuts and remove the electronics box access panel at the rear of the

game. You will need to unplug the 2 fan power connectors in order to completely remove the
panel. Also remove the black plate along the bottom of the game. See Figure 1.

4. Use the Motherboard Diagrams section to determine the board type in your game, then discon-

nect all connections to the board. NOTE: Be sure to read the Motherboard Handling Precau-
tions before handling the board.

5. Remove the 4 nuts on the monitor side of the electronics box and remove the motherboard.

Insert the board into an anti-static bag for storage.

Motherboard Installation

1. Place the new motherboard in the game and secure it with the 4 nuts.

2. Reconnect all connections to the motherboard.

3. Replace the back plate along the bottom of the game, then reconnect the 2 fan power connec-

tors and replace the electronics box access panel. Secure the panel with the 2 thumbnuts.
See Figure 1.

4. Replace and lock the lid.

5. Plug in and turn on the game.

Hard Drive Removal

1. Turn off and unplug the game.

2. Unlock and remove the lid.

3. Unscrew the 2 thumbnuts and remove the electronics box access panel at the rear of the

game. You will need to unplug the 2 fan power connectors in order to completely remove the
panel. Also remove the black plate along the bottom of the game. See Figure 1.

4. Remove the 6 screws (3 per side, see Figure 2) fastening the electronics box to the game

chassis, then slide the box towards you and disconnect all necessary harnesses until you can
completely remove the box and access the hard drive. Remember which harnesses were
disconnected.

5. Loosen the 4 screws (2 on each side) fastening the 2 hard drive mounting brackets to the

electronics box until you’re able to slide the brackets away from the box. See Figure 3.

6. Remove the 4 screws and shoulder washers securing the hard drive to the mounting brackets

and remove the drive. Also remove the 2 screws (1 per side) fastening the cable clamp to the
drive. See Figure 3.

7. Unplug the 4-pin power connector and the ribbon cable from the hard drive. See Figure 3.

ATTENTION:

OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DEVICES

Removal/Installation of Major Assemblies -

Full MAXX

Troubleshooting Information - Removal/Installation of Major Assemblies -

Full MAXX

Megatouch MAXX Technical Reference Manual

ATTENTION:

OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DEVICES

Removal/Installation of Major Assemblies -

Full MAXX (cont’d)

Hard Drive Installation

1. Plug the power connector and ribbon cable into the new hard drive.

2. Fasten the cable clamp to the hard drive with the 2 screws (1 per side), then secure the hard

drive to the mounting brackets with the 4 screws and shoulder washers. See Figure 3.

3. Attach the hard drive assembly to the electronics box by tightening the 4 screws that fasten the

hard drive brackets to the box.

4. Place the electronics box in the game and reconnect all harnesses disconnected in step 4

above, then fasten the electronics box with the 6 screws (3 per side, see Figure 2).

5. Replace the back plate along the bottom of the game, then reconnect the 2 fan power connec-

tors and replace the electronics box access panel. Secure the panel with the 2 thumbnuts.
See Figure 1.

6. Replace and lock the lid.

7. Plug in and turn on the game.

Monitor Removal

1. Turn off and unplug the game.

2. Unlock and remove the coin mech from the game.

3. Unlock and remove the lid.

4. Unscrew the 2 thumbnuts and remove the electronics box access panel at the rear of the

game. You will need to unplug the 2 fan power connectors in order to completely remove the
panel. Also remove the black plate along the bottom of the game. See Figure 1.

5. Remove the 6 screws (3 per side, see Figure 2) fastening the electronics box to the game

chassis, then slide the box towards you and disconnect all necessary harnesses until you can
completely remove the box and access the monitor. Remember which harnesses were dis-
connected.

6. Disconnect the monitor power connection (black and white wires running from the monitor

board to the right angle connector plugged into the power supply).

7. Disconnect the monitor signal cable from the motherboard.

8. Remove the two nuts and washers securing the touchscreen controller to the game and re-

move the controller from the mounting screws. Then disconnect the touchscreen controller
cable from the back of the controller and disconnect the Molex connector (orange and gray
wires) running from the touchscreen controller cable to the main power harness.

9. Remove the 2 nuts securing the monitor assembly to the cabinet base on the cash box side.

10. Loosen (do not remove) the 2 nuts securing the monitor assembly to the cabinet base on the

side opposite the cash box.

11. Slide the monitor assembly back and lift it off the mounting studs until you’re able to remove it

from the game.

Troubleshooting Information - Removal/Installation of Major Assemblies -

Full MAXX

Megatouch MAXX Technical Reference Manual

ATTENTION:

OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DEVICES

Removal/Installation of Major Assemblies -

Full MAXX (cont’d)

Monitor Installation

1. Place the new monitor assembly on the mounting studs in the game.

2. Tighten the 2 nuts to secure the monitor assembly to the cabinet base on the opposite side of

the cash box.

3. Replace the 2 nuts to secure the monitor assembly to the cabinet base on the cash box side.

4. Route the new touchscreen controller cable under the picture tube and away from the flyback

transformer. Then reconnect the cable in the back of the controller and secure the controller on
the mounting screws in the game with the existing hardware. Also connect the Molex connec-
tor (orange and gray wires) to the main power harness.

5. Reconnect the monitor signal cable to the motherboard.

6. Reconnect the monitor power connector.

7. Place the electronics box in the game and reconnect all harnesses disconnected in step 5

above, then fasten the electronics box with the 6 screws (3 per side, see Figure 2).

8. Replace the back plate along the bottom of the game, then reconnect the 2 fan power connec-

tors and replace the electronics box access panel. Secure the panel with the 2 thumbnuts.
See Figure 1.

9. Replace and lock the lid.

10. Replace and lock the coin mech.

11. Plug in and turn on the game.

Touchscreen Removal